Skip to main content

Download Center

Search by product Model Number

By Document Type

MX882002C CDMA2000 Measurement Software/MX882003C 1xEV-DO Measurement Software

Product Introduction for the MX882002C CDMA2000 Measurement Software/MX882003C 1xEV-DO Measurement Software

Product Introduction pdf 1.5 MB 24/05/2007

Characterizing RF Losses between GSM Phones and Test Equipment

Characterizing RF Losses between GSM Phones and Test Equipment

White Paper pdf 1.6 MB 03/04/2007

Characterizing RF Losses between CDMA Phones and Test Equipment

Characterizing RF Losses between CDMA Phones and Test Equipment

White Paper pdf 1.2 MB 27/03/2007

Effective Test Procedures for Cellular Telephones

Effective Test procedures for Cellular Telephones. Cellular phone testing plays a critical role in product development, manufacturing, and repair. Ideally, testing should be as simple as connecting the phone to the tester, running the test, and documenting the results.

White Paper pdf 59.2 KB 27/11/2006

MX882002C CDMA2000 Measurement Software/MX882003C 1xEV-DO Measurement Software

The MX882002C CDMA2000 Measurement Software is for measuring Rx and Tx performance of mobile terminals conforming to the IS-2000 standard, todayfs most widespread 3G technology.

Brochure pdf 2.5 MB 14/11/2006

MX882002A CDMA2000 Measurement Software /MX882003A 1xEV-DO Measurement Software

The MX882002A CDMA2000 Measurement Software is for measuring Rx and Tx performance of mobile terminals conforming to the IS-2000 standard, todayfs most widespread 3G technology.

Brochure pdf 1.4 MB 14/11/2006

MT8820A Radio Communication Analyzer (CDMA2000/1xEV-DO)

Application Note for the MT8820A Radio Communication Analyzer (CDMA2000/1xEV-DO)

Application Note pdf 474.5 KB 10/11/2006

MT8815A Radio Communication Analyzer

The MT8815A Radio Communication Analyzer is a multisystem platform for testing W-CDMA/HSDPA,GSM/GPRS/EGPRS, CDMA2000R 1X/1xEV-DO, AMPS, PDC, PHS, and ADVANCED PHS mobile phones.

Brochure pdf 25/09/2006

MT8820A Radio Communication Analyzer

The MT8820A hardware platform covers a frequency range of 30 MHz to 2.7 GHz. When dedicated measurement software and hardware (options) are installed, this single platform supports evaluation of all the main transmission/reception test items for W-CDMA/HSDPA, GSM/GPRS/EGPRS, cdma2000R 1x (IS-2000), cdma2000 1xEV-DO, PDC and PHS/ADVANCED PHS terminals.

Brochure pdf 3.6 MB 25/04/2006

MX882000B W-CDMA Measurement Software/MX882000B-11 HSDPA Measurement Software

The MX882000B W-CDMA Measurement Software (requires MX88205xA W-CDMA Call Processing Software) is designed for mobile terminal transmission and reception measurements of the W-CDMA system that supports the third generation digital mobile communications.

Brochure pdf 2.8 MB 25/04/2006

MX882001A GSM Measurement Software/MX882001A-11 EGPRS Measurement Software

The MX882001A GSM Measurement Software supports transmission and reception measurements of digital mobile terminals that conform to GSM/GPRS/EGPRS (MX882001A-11 is required for EGPRS measurement), the most widely used digital mobile standard in the world.

Brochure pdf 1.6 MB 25/04/2006

MX882004A PDC Measurement Software

The MX882004A PDC Measurement Software supports transmit/receive measurements of mobile terminals conforming to the PDC system, the most common system in Japan. By installing the MX882004A PDC Measurement Software in the MT8820A mainframe, one unit can evaluate major transmission/reception characteristics of common digital mobile terminals used in Japan.

Brochure pdf 845.7 KB 25/04/2006

MX882005A PHS Measurement Software/MX882005A-11 ADVANCED PHS Measurement Software

The MX882005A PHS Measurement Software supports transmission and reception measurements of mobile terminals conforming to the PHS system which is spreading through the world centering on Asia including Japan.

Brochure pdf 665.5 KB 25/04/2006

MX882022A CDMA2000 Wireless Application Test Software

The MX882022A CDMA2000 Wireless Application Test Software is designed for evaluating various applications incorporated in mobile terminals conforming to the 3rd generation system, cdma2000R 1x (IS-2000). It operates on the platform of MT8820A Radio Communication Analyzer.

Brochure pdf 1.3 MB 25/04/2006

MX882000B W-CDMA/HSDPA Measurement Software

Product introduction of Key Features and specifications of the MX882000B W-CDMA Measurement Software

Product Introduction pdf 827.6 KB 21/03/2006

W-CDMA and GSM Testing with the MT8820A Radio Communication Analyzer

Application Note for the W-CDMA and GSM Testing with the MT8820A Radio Communication Analyzer

Application Note pdf 3.9 MB 21/01/2006

MX882000B W-CDMA/HSDPA Measurement Software

MX882000B W-CDMA/HSDPA Measurement Software for MT8820A Test System

Product Introduction pdf 893.5 KB 01/11/2005

MX882000A W-CDMA Measurement Software

Product Introduction for the MX882000A W-CDMA Measurement Software

Product Introduction pdf 628.0 KB 16/02/2005

MX882003A 1xEV-DO Measurement Software for the MT8820

Product Introduction for the MX882003A 1xEV-DO Measuring Software for the MT8820 Radio Communication Analyzer

Product Introduction pdf 527.7 KB 27/04/2004

MX882005A PHS Measurement Software Product Introduction

Product Introduction for the MX882005A PHS Measurement Software for the MT8820 Radio Communication Analyzer

Product Introduction pdf 426.3 KB 27/04/2004

By Document Type

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

Drivers, Software Downloads 27/10/2016

LabVIEW Driver for the MT8820 Radio Communications Analyzer GSM

LabVIEW Driver for the MT8820 Radio Communications Analyzer GSM

Drivers, Software Downloads zip 6.6 MB 15/02/2005

LabWindows for the MT8820 Radio Communications Analyzer Mainframe

LabWindows for the MT8820 Radio Communications Analyzer Mainframe

Drivers, Software Downloads zip 531.6 KB 15/02/2005

LabVIEW Driver for the MT8820 Radio Communications Analyzer Mainframe

LabVIEW Driver for the MT8820 Radio Communications Analyzer Mainframe

Drivers, Software Downloads zip 1.1 MB 15/02/2005

LabWindows for the MT8820 Radio Communications Analyzer Mainframe

LabWindows for the MT8820 Radio Communications Analyzer Mainframe

Drivers, Software Downloads zip 45.4 KB 15/02/2005

LabVIEW Driver for the MT8820 W-CDMA Radio Communications Analyzer

LabVIEW Driver for the MT8820 W-CDMA Radio Communications Analyzer

Drivers, Software Downloads zip 6.3 MB 15/02/2005

LabWindows for the MT8820 W-CDMA Radio Communications Analyzer

LabWindows for the MT8820 W-CDMA Radio Communications Analyzer

Drivers, Software Downloads zip 193.9 KB 15/02/2005

By Product Category

Is it possible to turn off the modulation of a W-CDMA signal ?

No, the MT8820A does not allow the user to turn off modulation in the WCDMA firmware

Is RSSI shown in the UE report?

No, RSSI is not displayed in UE report

Can the MT8820A/MT8815A be controlled by RS-232?

The MT8820A cannot be controlled using RS-232. The MT8815A can be controlled using the RS-232 serial connector. The RFS-232C ports on the rear of both instruments are for packet data applications.

Is testing of TS34.121.7.2 and TS34.121.7.8 possible using an MT8820A?

7.2 Demodulation in Static Propagation conditions can be measured with a MT8820A. 7.8 Power Control in the downlink cannot be measured with an MT8820A..

Is a USIM card needed for receiver sensitivity measurements of WCDMA User Equipment?

Yes, the receiver sensitivity is measured in loop-back condition of W-CDMA terminal using a test USIM. Anritsu can supply a card as an accessory, model number P0019.

What is needed to test the video phone function of W-CDMA?

The following configuration is required. 1.Option01 W-CDMA Measurement Hardwasre of MT8820A. 2.MX882000B W-CDMA Measurement Software. 3.MX882051A W-CDMA Call Processing Software. 4.Option03 W-CDMA Video Phone TestThis configuration enables end-to-end video phone test between W-CDMA terminal and MT8820A.

What are the required options for examining a TV phone with the MT8820A?

Option-01, MX882000B and MX882051A, and option-03 are required

What is the accuracy of the adjacent channel leakage power in a W-CDMA measurement?

The accuracy is +/-0.5dB from -10 to +35dBm at MAIN 1 after the calibration

How do I check the version of software for the current measurement system?

Push the [Std] key on the front panel display. To change the measurment system you can then select the soft key next to the measurment standard desired.

What is the configuration of the test equipment for voice communication test of GSM mobile phone?

The combination of MT8820A-02 TDMA Measurement Hardware and MX882001A GSM Measurement Software and MX882001A-01 GSM Voice Codec enable the voice communication test by echo-back.

What is the equipment configuration for measurement of CDMA20001x(IS-2000) and 1X-EVDO(IS-856) mobile phone ?

The following options and software are required.1. Option03 CDMA2000 Measurement Hardware 2. Option04 1xEV-DO Measurement Hardware of MT8820Aof MT8820A3.MX882002A CDMA2000 Measurement software4. MX882003A 1xEV-DO Measurement Software

What is the configuration of an MT8820A for testing a CDMA20001x(IS-2000) mobile phone ?

MT8820A Option 03, CDMA2000 Measurement Hardware of MT8820A and MX882002A CDMA2000 Measurement Software are required

What is the equipment configuration for measurement of GSM mobile phone ?

Option 02 TDMA Measurement Hardware of MT8820A and MX882001A GSM Measurement Software are required.

Is the P0019 USIM card only used for WCDMA UE testing?

Yes. This memory card conforms to the 3GPP standard. It can not be used for GSM.

How can I change the output level of the signal generator in the W-CDMA measurement software in the MT8820A?

The level can be changed in the following manner: Press the [Output Level] key.Then enter the desired level from the number keypad on the unit. To set the new value, press the [Set] key .

How do you setup the Audio measurement in the GSM mode on the MT8820A?

Set the Audio Parameter as [VoiceCodec]. Audio Input/Output of Audio Parameter is changed to [Handset] from [AF]. The Codec chooses is then set as[EFS]. TCH Test Patten is set as VoiceCodec. When the terminal is connected it is now possible to examine the audio.

What is needed to test the external packet data transfer of W-CDMA?

The following configuration is required.1. Option01 W-CDMA Measurement Hardwasre of MT8820A.2.MX882000B W-CDMA Measurement Software.3. MX882051A W-CDMA Call Processing Software.4. Option02 W-CDMA External Packet DataThis configuration enables end-to-end data transfer between W-CDMA terminal and a server PC.

What is the equipment configuration for measurement of PDC mobile phone ?

Option 02 TDMA Measurement Hardware of MT8820A and MX882004A PDC Measurement Software are required.

What is the equipment configuration for measurement of WCDMA mobile phone complied with 3GPP ?

Option 01 W-CDMA Measurement Hardware of MT8820A and MX882000B W-CDMA Measurement Software are required.

What is the equipment configuration for measurement of PHS mobile phone ?

Option 02 TDMA Measurement Hardware of MT8820A and MX882005A PHS Measurement Software are required.
Confirm your country below to see local events, contact information and special offers.