Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers. Ranging from high-performance and multi-function, high-end models for R&D to handheld models for field use.
Selection Guide
pdf 2.1 MB
Version: e1900
28/04/2023
The MS2840A Signal Analyzer (“the MS2840A” hereafter) is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The MS2840A enables high-speed and high-accuracy signal processing of
wide-ranging analyses at full-span, a characteristic of conventional
sweep-type spectrum analyzers, using a digital IF block. In addition, the
FFT process (high-speed Fourier conversion) realizes high-speed
spectrum analysis and simultaneous analysis on frequency and time axes
not possible with conventional sweep-type spectrum analyzers. Also,
added option enables recording of the RF input signal as digital data
(digitize function). It can be used in a variety of applications from
research and development to manufacturing thanks to its characteristics.
Operations Manual
pdf 7.5 MB
Version: 22
25/04/2023
This White Paper outlines measuring instruments for testing the basic radio performance of pulse-radar transmissions used
mainly for meteorological observations and air traffic-control systems.
White Paper
pdf 555.0 KB
29/03/2023
Anritsu Electronic Measuring Instruments Catalog of Condensed Version
Catalog
pdf 2.4 MB
Version: 2022
23/03/2023
Signal Analyzer MS2840A-044/046 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 26.5 GHz/44.5 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models* and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, the standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software and analog measurement software options support evaluation of various digital and analog wireless modulation signals and also adds functions for measuring amplifier noise figure (NF) values. Further, connecting the separately sold High Performance Waveguide Mixer enables spectrum measurements between 50 and 90 GHz for wideband wireless equipment, radar, etc.
Brochure
pdf 3.9 MB
22/03/2023
Data Sheet for Signal Analyzer MS2840A and related products
Products: Signal Analyzer MS2840A, High Performance Waveguide Mixer MA2806A/MA2808A, External Mixer (Harmonic Mixer) MA2740C/MA2750C series and Noise Source, etc.
Datasheet
pdf 790.2 KB
22/03/2023
This Configuration Guide explains how to order the new MS2840A and MS2840A retrofit options and measurement software.
Configuration Guides
pdf 383.0 KB
22/03/2023
Signal Analyzer MS2840A-040/041 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 3.6 GHz/6 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, dedicated options for MS2840A-040/041 greatly enhance their performance to exceed that of other makers’ high-grade models (–133 dBc/Hz at measurement frequency of 500 MHz and offset frequency of 10 kHz). The standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software, analog measurement software, vector/analog signal generator options support evaluation of various digital and analog wireless equipment/devices and also adds functions for measuring amplifier noise figure (NF) values.
Brochure
pdf 5.1 MB
22/03/2023
Contents: Excellent Close-in Phase Noise Performance, Application Example: Wireless Backhaul and Automotive Radar/Sensors, Mixers Expand Frequency Range, Accessories Expand Measurement Functions, Main Configuration, Main Features and Configurations
Product Introduction
pdf 1.0 MB
20/03/2023
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
Brochure
pdf 5.9 MB
20/03/2023
Anritsu EMEA has partnered up with AnaPico AG, creating a comprehensive offering of RF and Microwave Solutions dedicated to Quantum Computing: from qubits design to final deployment. (short description)
Leaflet
pdf 1.9 MB
01/09/2022
Anritsu EMEA has partnered up with AnaPico AG, creating a comprehensive offering of RF and Microwave Solutions dedicated to Quantum Computing: from qubits design to final deployment. (longer description)
Leaflet
pdf 3.8 MB
01/09/2022
MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.
Brochure
pdf 5.2 MB
08/06/2022
The Analog Measurement Software MX269018A is software for measuring the TRx performance of radio equipment using analog modulation (FM/ΦM/AM). The Signal Analyzer MS2830A supports all-in-one tests of key analog wireless TRx characteristics using the built-in optional analog signal generator and audio analyzer. The Signal Analyzer MS2840A supports tests of key analog wireless Tx characteristics.
Product Introduction
pdf 2.4 MB
11/05/2022
This is a leaflet about MT8000A/MT8821C, signal analyzer and signal generator used for 5G/LTE User Equipment RF evaluation.
Leaflet
pdf 358.3 KB
21/01/2022
This document describes type and size of memory and storage device inside Anritsu Signal Analyzer and Signal Generator
series in order to use safely the products against information security threat.
Leaflet
pdf 119.3 KB
03/11/2020
This guide explains the simple procedure for installing firmware in the Signal Analyzer
MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.
User Guide
pdf 576.7 KB
13/04/2020
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
White Paper
pdf 608.5 KB
26/12/2019
Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standard equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode.
You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for details.
Operations Manual
pdf 4.6 MB
Version: 57
14/11/2019
The MS2830A/MS2840A/MS2850A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The spectrum analyzer function enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.
Operations Manual
pdf 11.0 MB
Version: 40
14/11/2019
