The Vector Signal Analysis software is intended for testing physical layer modulation quality of various transmission standards. P/N: 10580-00475
User Guide
pdf 37.6 MB
Version: D
24/01/2023
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00068 | OHS | version D | 01/24/2023
Online Help System
html 184.9 KB
Version: D
24/01/2023
Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
Brochure
pdf 11.4 MB
Version: AC
21/12/2022
Poster showcasing the RF and Microwave Handheld analyzers options. Features Cable and Antenna Analyzers, Base Station Analyzers, Field Master Pro, Spectrum Analyzers, Vector Network Analyzers, and PIM Analyzers. P/N: 11410-00571
Brochure
pdf 325.0 KB
Version: T
21/12/2022
ElectroMagnetic Field (EMF) Measurement System is designed to measure radiation compliance with various national standards for personal safety set by governmental regulatory authorities. Many countries have mandated EMF safety testing in areas where cellular or other high power transmission antennas are located. P/N: 11410-00838
Brochure
pdf 5.6 MB
Version: H
21/12/2022
This broadband, easy-to-use handheld direction finding antenna system includes everything you need to find the sources of signals. With a broadband preamplifier, the system is sensitive. With a GPS receiver, it knows where it is. With the electronic compass it knows where it is aimed. With an antenna attached, the InterferenceHunter captures a direction and signal level when the user presses the trigger on the ergonomic handle. P/N: 11410-00692
Datasheet
pdf 1.6 MB
Version: J
07/11/2022
This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu Field Master series of handheld analyzers. Be sure to read these important notices before operating the equipment. P/N: 10100-00069
Datasheet
pdf 1.4 MB
Version: H
26/10/2022
This measurement guide covers the Anritsu High Accuracy Power Meter (Option 19) calibration and setup
measurements. Instruments with Option 19 and an appropriate Anritsu power sensor can be used to make
high accuracy power measurements. P/N: 10580-00492
Measurement Guide
pdf 1.4 MB
Version: B
25/10/2022
This measurement guide describes the real time spectrum analyzer (RTSA) measurement functions of the
Anritsu Field Master series handheld instruments and remote spectrum monitors. P/N: 10580-00448
Measurement Guide
pdf 6.2 MB
Version: B
25/10/2022
This measurement guide describes the Long Term Evolution (LTE) analyzer and its measurement setup
functions, including selecting the analyzer and setting up frequency, bandwidth, amplitude, span, and
markers. P/N: 10580-00450
Measurement Guide
pdf 7.1 MB
Version: B
25/10/2022
This measurement guide describes the cable and antenna analyzer (CAA) measurement functions of the
Anritsu Field Master Series handheld instruments. P/N: 10580-00493
Measurement Guide
pdf 8.3 MB
Version: B
25/10/2022
This measurement guide describes the spectrum analyzer measurement functions of the Anritsu
Field Master Series handheld instruments and Remote Spectrum Monitors. P/N: 10580-00447
Measurement Guide
pdf 11.2 MB
Version: B
25/10/2022
This measurement guide describes the 5GNR measurement setup, including selecting the analyzer and
setting up frequency, bandwidth, amplitude, span, and markers. P/N: 10580-00449
Measurement Guide
pdf 6.6 MB
Version: B
25/10/2022
This manual provides SCPI programming information and a list of SCPI programming commands for the Anritsu MS2090A Field Master Pro Spectrum Analyzer. PN: 10580-00445
Programming Manual
pdf 2.7 MB
Version: R
05/10/2022
Spectrum monitoring systems facilitate the identification and removal of interference signals that degrade network capacity. By monitoring spectrum on a continual basis, problem signals can be identified as they occur
in real-time. Patterns of unwanted signal activity can also be examined, providing an efficient way to characterize and locate the source of the interference problem. P/N: 11410-00876
Brochure
pdf 9.4 MB
Version: L
05/10/2022
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00064 | OHS | E | 10/05/2022
Online Help System
html 185.0 KB
Version: E
05/10/2022
The MS2090A Field Master Pro User Guide is part of a set of manuals that cover all of the instrument functions and their use. This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups. Most instrument operations are covered in specific chapters of this manual as listed below. Remote programming is covered in the programming manual. P/N: 10580-00444
User Guide
pdf 10.0 MB
Version: T
05/10/2022
This measurement guide gives a brief overview of the Pulse Analyzer measurement functions of the Anritsu
Field Master series handheld instruments and is intended to assist you in setting up a pulse measurement. P/N: 10580-00451
Measurement Guide
pdf 3.5 MB
Version: A
05/10/2022
This measurement guide gives a brief overview of the Electromagnetic Field (EMF) Meter (Option 445). The
EMF Meter is used for electromagnetic field (EMF) compliance testing over the broadband frequency range
determined by the EMF probe that is connected to the instrument. PN: 10580-00489
Measurement Guide
pdf 1.3 MB
Version: A
05/10/2022
This measurement guide describes the IQ capture and streaming functions of the Anritsu Field Master Series
handheld instruments and Remote Spectrum Monitors. P/N: 10580-00490
Measurement Guide
pdf 2.3 MB
Version: A
05/10/2022