Comprehensive test and evaluation solutions for every layer of AI data centers, supporting semiconductors through networks from R&D to mass production.
Product Introduction
pdf 5.4 MB
08/10/2026
This explains the MP1900A series specifications.
Datasheet
pdf 3.7 MB
11/09/2026
Data center and network traffic volumes are increasing exponentially as mobile networks start upgrading to 5G and ‘Big Data’ applications become popular. As a consequence, physical-layer devices are required to support faster transmission speeds, larger data capacities, and assured signal quality, in turn making signal integrity analysis ever more important. To meet these needs, Anritsu has implemented more accurate signal integrity tests, such as bit error rate (BER) measurements, crosstalk tests, Jitter Tolerance tests, etc., in its MP1900A test solution for 32G/64G NRZ/PAM4.
Brochure
pdf 4.0 MB
09/09/2026
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, 32G/64G PAM4 PPG, 32G PAM4 ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
Brochure
pdf 4.0 MB
09/09/2026
The Protection Adapters J1678A and J1679A are for protecting DUTs and measuring instruments against ESD/EOS and support high-reliability measurements.
Leaflet
pdf 611.5 KB
09/09/2026
The Signal Quality Analyzer-R MP1900A is a modular design offering optional functions for easy customization to users’ requirements. As a result, the configuration can be tailored to budget timing while the excellent expandability offers easy addition of new future functions. This Selection Guide explains the modules and options, as well as their selection conditions and possible combinations. Please use it to check the best configuration meeting the measurement needs.
Selection Guide
pdf 4.8 MB
09/09/2026
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
Product Introduction
pdf 7.4 MB
09/09/2026
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
Leaflet
pdf 507.3 KB
09/09/2026
Overview of data center interconnect technologies, from coherent pluggable optics and IP-over-DWDM to 800G, 1.6T, and advanced optical fibers.
Leaflet
pdf 337.3 KB
08/09/2026
MU191000A/MU195020A/MU195040A/MU195050A/MU196020A/MU196020C/MU196040A/
MU196040B/MU196050B/MU196060A Operation Manual.
Operations Manual
pdf 6.4 MB
Version: 24
19/08/2026
This document is the Operation manual of the software that controls the Signal Quality Analyzer Series.
Operations Manual
pdf 17.0 MB
Version: 23
19/08/2026
English MX183000A Operation Manual.
Operations Manual
pdf 15.0 MB
Version: 31
19/08/2026
In addition to the PCIe 1.0 to PCIe 6.0 receiver tests that it has supported as a certified tester, the Signal Quality Analyzer-R MP1900A provides presets and compliance patterns required for PCIe 7.0 Base Specification tests. It automates stress signal calibration and jitter tolerance tests, helping to reduce the design validation time.
Leaflet
pdf 175.5 KB
03/06/2026
The MU181500B Jitter Modulation Source is a plug-in module for the
Signal Quality Analyzer series.
Operations Manual
pdf 4.4 MB
Version: 25
03/06/2026
To solve verification challenges and other use cases, the Signal Quality Analyzer-R MP1900A has a
Sequence Editor function for the MU195020A 21G/32G bit/s SI PPG, featuring an intuitive and easy-to-use
custom pattern and sequence creation interface targeted at PCIe 1 to 5 and USB3.2 applications. Using this
Sequence Editor with the MU195040A 21G/32G bit/s SI ED HSSB Data detection function supports fast and
convenient data analysis.
Leaflet
pdf 430.0 KB
03/06/2026
This document introduces three types of tests required for Co-Packaged Optics (CPO): electrical signals for Switch ASICs, optical signals for optical engines, and Ethernet signals for CPO Switches.
Application Note
pdf 935.5 KB
20/05/2026
Introducing Anritsu's measurement solutions for high-speed digital interfaces, optical transceivers, and transport networks.
Product Introduction
pdf 3.7 MB
18/05/2026
This document introduces a variety of Anritsu NTN test solutions for key use cases, after explaining the market and technical trends of NTN.
Leaflet
pdf 4.9 MB
12/05/2026
Anritsu Electronic Measuring Instruments Catalog Condensed Version
Catalog
pdf 6.1 MB
Version: 2025
14/01/2026
On December 24, 2025, the beta version of the software became available for download through the My Anritsu service. This announcement is intended to request that you complete the registration in preparation for using the beta version.
Leaflet
pdf 229.5 KB
24/12/2025
