Items |
Specifications |
Frequency |
Range |
250 kHz to 6 GHz (Option), 250 kHz to 3 GHz (Standard) |
Resolution |
0.01 Hz |
Output Level |
Settable Range |
-140 to +13 dBm (E-ATT), -140 to +19 dBm (M-ATT) |
Accuracy Range |
CW: -136 to +6 dBm (E-ATT), -136 to +10 dBm (M-ATT) |
Accuracy |
±0.5 dB (E-ATT, 25 MHz to 3 GHz, -120 to +6 dBm)
±0.8 dB (E-ATT, 3 GHz to 6 GHz, -120 to +3 dBm)
±0.5 dB (M-ATT, 25 MHz to 3 GHz, -120 to +10 dBm)
±0.8 dB (M-ATT, 3 GHz to 6 GHz, -100 to +7 dBm) |
Difference of CW and MOD |
±0.2 dB (when outputting W-CDMA Downlink 1code, 1 carrier, RMS=1634) |
Signal Purity |
Spurious/Harmonics |
<-30 dBc (f > 300 MHz@E-ATT, f > 250 kHz@M-ATT) |
Spurious/ Non harmonics |
<-60 dBc (Expect the intersection spurious of 2.4 GHz, 25 MHz to 3 GHz)
<-54 dBc (Expect the intersection spurious of 4.4 GHz, 3 GHz to 6 GHz) |
Baseband Generator |
Resolution |
D/A 14 bit |
Sample Rate |
20 kHz to 160 MHz |
Waveform Memory |
2 GB = 512 Msample (Option)
1 GB = 256 Msample (Standard) |
Waveform Output Mode |
MG3700A contains two built-in arbitrary waveform memories, and these two
memories can each choose one waveform pattern, respectively. MG3700A can
output the signal of either one of the memories, and can also combine and output
both signals simultaneously.
|
I/Q Modulation Bandwidth |
120 MHz (Using internal baseband generator) |
150 MHz (Using external IQ input) |
Mass |
<15 kg (excluding option) |
BER Measurement Function |
Standard |
Input bit rate: 1 kbps to 20 Mbps
Measurable patterns: PN9/11/15/20/23, ALL0, ALL1, Repetition of 0 and 1 |
Option |
Input bit rate: 100 bps to 120 Mbps
Measurable patterns: PN9/11/15/20/23, PN9fix/11fix/15fix/20fix/23fix, ALL0,
ALL1, Repetition of 0 and 1, UserDefine |
Storage of Waveform Data |
HDD |
40 GB HDD is built-in. |
CF |
CF slot is arranged at the front panel. |
Waveform Transmission |
External → HDD |
2 MB/s (typ., at 100Base Tx), or 1.5 MB/s (typ., CF card) |
HDD → ARB memory |
14 MB/s (typ.) |
Remote Control |
GPIB, 100Base-Tx |
The Method of Waveform Offer |
IQproducer |
IQproducer is PC application software, that can generate waveform patterns
and transmit them to MG3700A. IQproducer is provided with MG3700A as a
standard
feature, and has the following four functions.
After trying the waveform pattern generation function with the IQproducer
System function, in order to actually use a waveform pattern in MG3700A the
license (option) corresponding to each system is required.
System license (Option): [Model: MX3701xxA]
MX370101A HSDPA IQproducer
MX370102A TDMA IQproducer
MX370103A CDMA2000 1xEV-DO IQproducer
MX370104A Multi-carrier IQproducer
MX370105A MOBILE WIMAX IQproducer
MX370106A DVB-T/H IQproducer
MX370107A Fading IQproducer
MX370108A LTE IQproducer
MX370108A-001 LTE-Advanced FDD Option [Requires MX370108A]
MX370109A XG-PHS IQproducer
MX370110A LTE TDD IQproducer
MX370110A-001 LTE-Advanced TDD Option [Requires MX370110A]
MX370111A WLAN IQproducer
MX370111A-001 802.11ac(80MHz)Option [Requires MX370111A] |
Waveform Patterns |
Waveform pattern options provide waveform data that meet the requirements of
various communication systems and can be used by the MG3700A built-in arbitrary
waveform generator. Waveform patterns are downloaded to MG3700A for use.
Pre-installed waveform patterns:
W-CDMA, GSM/EDGE, CDMA2000 1X, 1xEV-DO, PDC, PHS, AWGN, GPS,
WLAN (IEEE802.11a/b/g), Digital Broadcast (ISDB-T/BS/CS/CATV), Bluetooth
Optional waveform patterns (Option): [Model: MX3700xxA]
MX370001A TD-SCDMA Waveform Pattern |
Generation of Custom Waveform Pattern |
IQ sample data files (in ASCII format) programmed by using general EDA
(Electronic Design Automation) tools such as MATLAB can also be converted
to waveform patterns for MG3700A. |