Anritsu FAQs
I wired my handheld tester to my laptop, then I configured the ethernet settings accordingly, but was unable to make a connection. Is there more that I must do?
There are two things to keep in mind when using a LAN remote connection to the handheld testers: 1) Changes made to the LAN settings do not take affect immediately - the power must be cycled for the changes to take affect. 2) In an effort to maximize battery life, if no LAN connection is detected at power up, the LAN parts are turned off. The only way to turn the LAN parts on is to turn the power off, connect to the LAN, and then turn power on. So, in this case, where the LAN configuration was set and the connecting made, cycling power should allow a connection to be made.
