Anritsu FAQs
What is the procedure to clear any user setups from the memory of a MG369XA or MG369XB Series Signal Generator?
A master reset of the instrument will overwrite any custom setups with default values. To perform a master reset on an MG369XA or MG369XB do the following: 1. Turn the MG369XX off by pushing and momentarily holding in the Operate/Standby front panel button until the instrument goes into Standby mode. 2. Push and hold the Output On/Off front panel button, and while holding it in, turn the MG369XX on by pushing and momentarily holding in the Operate/Standby front panel button. 3. Once the boot-up sequence completes the unit has now been reset and the Output On/Off button can be released.
