Basic Performance
Frequency range
|
100 kHz to 2.7/4/6 GHz [1stRF Option]
100 kHz to 2.7/4/6 GHz [2ndRF Option]
|
SSB phase noise
|
<-140 dBc/Hz (nom.) (100 MHz, 20 kHz offset, CW)
<-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset, CW)
|
Level setting range
|
-110 to +17 dBm [Standard]
-144 to +17 dBm [Option]
|
High power output
|
+23 dBm (CW, 400 MHz to 3 GHz) [Option]
|
Switching speed
|
<600 µs (frequency/amplitude, List/Sweep mode)
|
|
Built-in AM/FM/ΦM/Pulse modulation function [Standard]
|
Expansion Options
Adding additional analog modulation input [Option]:
Adding additional analog modulation input options extends to two internal modulation sources (AM/FM/ΦM) and
one external modulation source supporting simultaneous two-signal modulation.
Two independent RF outputs using Dual-RF [Option]:
Supports "Wanted + Interference wave for Rx characteristics tests", "Amp intermodulation characteristics evaluation"
and "RF/LO signal source for Mixer evaluations".
USB power sensor (Sold separately):
Supports connection of two USB power sensors max.
Expansion to narrowband digital modulation signal generator [Option]:
Adding the digital modulation function [Option] supports generation of narrowband digital modulation signals.
- RF modulation bandwidth : 2 MHz
- Waveform generation software: IQproducer (License sold separately)
TDMA IQproducer / Fading IQproducer
BER measurement function [Option]:
Input bit rate: 100 bps to 40 Mbps
Communications Interfaces
- Standard 1000BASE-T, GPIB, and USB interfaces
- Built-in SCPI, MG3700A/MS269xA/MS2830A/MG364xA compatibility modes
