Skip to main content

Anritsu Introduces Signal Analyzer/Spectrum Analyzer Options to Support High-Speed Data-transfer for advanced waveform analysis

10/08/2017

MS2850A USB3.0 and PCIe interfaces Enable Faster Data transfer Rates to external applications used in prototype and proprietary waveforms and analysis of 5G, Broadcast Satellite Devices and Systems

MS2850A

Luton, United Kingdom - August 10, 2017 – Anritsu Corporation introduces two new options for its Signal Analyzer/Spectrum Analyzer MS2850A to support high speed transfer of captured waveform data to an external computer for post processing and analysis. Combined with the 1-GHz capture and analysis bandwidth, the options expand the capability of the MS2850A to address the needs of emerging wireless networks, including 5G, where experimental and prototype waveforms are being analyzed using simulation and analysis software.

With the new options, the MS2850A provide engineers developing 5G terminals, broadcast satellite communications, wireless communications equipment, and broadband wireless communication systems with a cost-efficient solution to comprehensively verify their high-speed designs. The new options install free software in the external PC to control the MS2850A, and transfer data captured by the MS2850A high-speed over a dedicated USB3.0/PCIe data-transfer interface. The MS2850A-053 option provides a PCIe Gen2 x8 connector to support high-speed external PCIe interfaces, while the MS2850A-054 option utilizes a type-B connector for testing high-speed data transfer from external USB interfaces via USB3.0. These enable data transfer speeds up to 100 times faster than conventional Ethernet ports, cutting the data transfer waiting time from 20 minutes to less than 10 seconds.

In addition to the 1-GHz analysis bandwidth, the Signal Analyzer/Spectrum Analyzer MS2850A has up to 32 GB of built-in waveform capture memory, wide measurement dynamic range of >140 dB and high flatness performance. Two models – with frequency coverage up to 32 GHz and 44.5 GHz, respectively – are available, each with the noise figure (NF) and phase noise performance required for 5G testing.

The affordable price of the MS2850A fills a market void for an economical solution to accurately measure infrastructure under development for the emerging 5G market, as well as similar high-speed applications. The analyzer supports 5G standards currently under development by 3GPP, as well as legacy technologies such as LTE, W-CDMA, TD-SCDMA and GSM.

About Anritsu

Anritsu Corporation (www.anritsu.com) is a provider of innovative communications solutions for more than 120 years. The company's test and measurement solutions include wireless, optical, microwave/RF and digital instruments, operations support systems and solutions, customized software solutions, that can be used during R&D, manufacturing, installation, and maintenance. Anritsu also provides precision microwave/RF components, optical devices, and high-speed devices for design into communication products and systems. With the addition of multidimensional service assurance solutions for network monitoring and optimization, Anritsu provides complete solutions for existing and next-generation wireline and wireless communication systems and service providers. Anritsu sells in over 90 countries worldwide with approximately 4,000 employees.

For further information, please contact:

Anritsu:
Eric Fauxpoint
Director - EMEA Business Development
Anritsu EMEA
Tel: +33 1 60 92 15 50
Email: Eric.Fauxpoint@anritsu.com
www.anritsu.com
Agency:
Janice Ashton
Napier Partnership Limited
Tel: +44 (0) 1243 531123
Email: janice@napierb2b.com

Confirm your country below to see local events, contact information and special offers.