The MT8220T BTS Master combines cable and antenna testing, signal analysis for all cellular standards, ultra-sensitive spectrum analysis, sophisticated interference tracking, and a vector signal generator for receiver testing in a compact, easy-to-use instrument. P/N: 11410-00698
This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing , Mobile/Wireless communication measureing instruments, Signal Analyzers/Spectrum Analyzers, Vector network Analyzers and RF Microwave measuring instruments products.
This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the
equipment. P/N: 10100-00065
The BTS Master features over 30 analyzers in one to meet virtually every measurement need. P/N: 11410-00717
This two page quick fact sheet outlines the key specifications, standard accessories and options available for the BTS Master. P/N: 11410-00723
This Online Help System is a compilation of manuals for easier viewing. P/N: 10450-00042
Online Help System
The BTS Master User Guide is part of a set of manuals that describe all of the instrument
functions and their use. This manual covers the instrument overview, system functions and
other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00366
This measurement guide describes the OBSAI (Open Base Station Architecture Initiative)
Analyzer test and measurement functions of Anritsu RF and Microwave Handheld
Instruments. P/N: 10580-00434
The BTS Master model of instruments offers a wide range of display options for 1-port and
1-path 2-port vector corrected measurements.
Cable and antenna analyzer measurements include: VSWR, Return Loss, Cable Loss,
Distance-To-Fault (DTF) Return Loss, DTF VSWR, 2-Port Gain, Smith Chart, 1-Port Phase,
and 2-Port Phase. P/N: 10580-00230
This Measurement Guide documents the Tracking Generator option and the Vector Signal Generator option. An available option must be installed in your instrument before it can be used. P/N: 10580-00232
Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers, ranging from high-performance and multi-function, high-end models for R&D to handheld types for field use.
Instructions describing the procedure to set up and perform PIM over CPRI measurements using option 754. P/N: 10580-00459
Quick Start Guide
This SCPI Programming Manual provides information for remote operation of the MT8220T
High Performance Base Station Analyzer using commands sent from an external controller
via Ethernet or USB connection. P/N: 10580-00367
This manual provides maintenance instructions for Anritsu BTS Master Model MT8220T.
The BTS Master Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00049
CPRI testing at the base station reduces truck rolls, tower climbs & OpEx
This article originally appeared in the on-line edition of RCR Wireless in March, 2016
Repeaters are used extensively for all cellular technologies to increase the coverage area of a serving macro base station, both externally and within buildings. It is important to set the required gain accurately to achieve the coverage desired and to ensure the isolation between server and donor antennas is high enough to prevent oscillation issues. P/N: 11410-00883
Utilize Anritsu handheld Site Master, Cell Master, and BTS Master for Cable and Antenna Measurements.
What's inside: Use Over the Air (OTA) tests to spot check a transmitters' coverage and signal quality.
Use the Direct Connect tests to check transmitter power and when the OTA test results are ambiguous.