Comprehensive test and evaluation solutions for every layer of AI data centers, supporting semiconductors through networks from R&D to mass production.
Product Introduction
pdf 5.4 MB
10/8/2026
This is the operation manual of the MT1000A Transport.
Operations Manual
pdf 30.7 MB
Version: 36.0
10/7/2026
MT1000A/MT1000A/MT1040A remote operation manual.
Operations Manual
pdf 4.7 MB
Version: 20.0
10/7/2026
Overview of data center interconnect technologies, from coherent pluggable optics and IP-over-DWDM to 800G, 1.6T, and advanced optical fibers.
Leaflet
pdf 337.3 KB
9/8/2026
The MU100020A/MU100021A/MU100022A are OTDR modules for the MT1000A Network Master Pro platform, which
incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition,
simultaneous installment of the 10G/100G Multirate Module MU100010A/MU100011A supports OTDR/CPRI measurements
in strong demand by the mobile fronthaul market.
Brochure
pdf 4.0 MB
8/18/2026
This leaflet introduces evaluation and verification methods for mission-critical wireless communications used in autonomous driving, drone operations, public safety networks, and other demanding applications. It explains solutions that support comprehensive communication quality assessment, from field radio testing to cloud network performance verification.
Leaflet
pdf 556.7 KB
7/30/2026
This document outlines IoT market trends, key technical challenges, and Anritsu’s test solutions to address them.
Product Introduction
pdf 1.2 MB
5/28/2026
Introducing Anritsu's measurement solutions for high-speed digital interfaces, optical transceivers, and transport networks.
Product Introduction
pdf 3.7 MB
5/18/2026
This document introduces a variety of Anritsu NTN test solutions for key use cases, after explaining the market and technical trends of NTN.
Leaflet
pdf 4.9 MB
5/12/2026
Virtual Network Master for KVM MX109031PC is a software-based measurement solution that visualizes communication quality in private cloud environments. It enables quantitative evaluation of latency, frame loss, and other network performance metrics directly on virtual platforms, supporting stable service operation and rapid troubleshooting.
Leaflet
pdf 469.1 KB
4/20/2026
The article introduces a test method effective for isolating communication performance degradation factors in in-vehicle wireless devices using an OTA environment.
Case Study
pdf 1.1 MB
4/17/2026
The introduction of transport module that can be mounted on MT1000A.
The MU100010A and MU100011A provide functions and performance at speeds from 1.5 Mbps to 10 Gbps, and from 10 Mbps to 100 Gbps, respectively, for installing and maintaining communications networks.
Brochure
pdf 8.6 MB
4/13/2026
The MU10002xA are OTDR modules for the Network Master Pro MT1000A platform, which
incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition, simultaneous installment of the 10G Multirate Module MU100010A supports OTDR/CPRI measurements in strong demand by the mobile fronthaul market.
Product Introduction
pdf 2.4 MB
4/13/2026
The Network Master Pro MT1000A is an all-in-one handy measuring instrument with various integrated functions for finding faults in optical fibers and for quality analysis of data carried over Ethernet, OTN, CPRI, etc., networks.
The MT1000A is configured as a combination of various measurement modules. It is designed to support a combination of selected measurement modules and options with the main unit.
Configuration Guides
pdf 3.4 MB
4/13/2026
The all-in-one Network Master Pro MT1000A is for earlier Ethernet network technologies with speeds up to 100G. Combination with the 10G Multirate Module MU100010A1 option supports all functions, performance and tests needed for installation and maintenance (I&M) of communication networks with speeds ranging from 1.5 Mbps to 10 Gbps. The 100G Multirate Module MU100011A option supports up to 100 Gbps.
Datasheet
pdf 1.8 MB
4/13/2026
The Network Master Pro MT1000A with optical-fiber event detection is an all-in-one multifunctional handy tester for data quality analysis of Ethernet, OTN, CPRI, etc., networks. With clearly visible 9-inch touch-panel, compact on-site portability in one hand, and easy operation, it has all the functions needed for network installation and maintenance while being convenient to manage and use.
Brochure
pdf 3.9 MB
4/13/2026
The Virtual Network Master (VNM) is a new software-based measuring instrument. While it can quantitatively evaluate measurement items, such as one-way latency and frame loss, this physical measuring instrument does not need to be installed in a cloud environment. The VNM is capable of visualizing the communication quality of the network including virtual layers.
Leaflet
pdf 350.8 KB
3/3/2026
Anritsu Electronic Measuring Instruments Catalog Condensed Version
Catalog
pdf 6.1 MB
Version: 2025
1/14/2026
With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
Brochure
pdf 2.9 MB
Version: E
1/6/2026
Open source licences
MD5 :e98ff4883248eee1c2ffc9d2c619a2d7
Operations Manual
zip 402.8 KB
Version: 05
12/3/2025
