Skip to main content

Download Center

Search by product Model Number

By Document Type

InterferenceHunter MA2700A Technical Data Sheet

This broadband, easy-to-use handheld direction finding antenna system includes everything you need to find the sources of signals. With a broadband preamplifier, the system is sensitive. With a GPS receiver, it knows where it is. With the electronic compass it knows where it is aimed. With an antenna attached, the InterferenceHunter captures a direction and signal level when the user presses the trigger on the ergonomic handle. P/N: 11410-00692

Datasheet pdf 1.7 MB Version: P 1/8/2026

Near-Field Probe Set User Guide

The Near-Field Probe set (p/n: 2000-2149-R) includes three magnetic (H) field and two electric (E) field probes designed for use in the resolution of emission problems, over a broad range of frequencies from below 100 kHz to above 1 GHz. The set also includes a 20 cm extension handle and comes in a custom carrying case. P/N: 10580-00347

User Guide pdf 2.7 MB Version: D 12/5/2025

VNA Master MS20xxC Technical Data Sheet

MS202xC and MS203xC VNA Master plus Spectrum Analyzer, is the industry's broadest frequency handheld solution to address cable, antenna, component, and signal analysis needs in the field with frequency coverage from 5 kHz up to 20 GHz. P/N: 11410-00548

Datasheet pdf 7.0 MB Version: AY 9/26/2025

Vector Network Analyzer for Handheld Instruments Measurement Guide

This Measurement Guide is for the VNA Master B and C series Vector Network Analyzers. The MS2026B and MS2028B VNA Master needs to have Firmware Version 2.0 and higher. Also covers the LMR Master in VNA mode. P/N: 10580-00289

Measurement Guide pdf 22.8 MB Version: N 9/18/2024

MS20xxC VNA Master Programming Manual

This SCPI Programming Manual provides information for remote operation of the MS20xxC Vector Network Analyzer (MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00306

Programming Manual pdf 3.9 MB Version: L 5/13/2024

VNA Master MS2036C Product Brochure

The VNA Master specifically addresses complex cable, waveguide and antenna measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and Time or Distance Domain measurements. P/N: 11410-00544

Brochure pdf 13.1 MB Version: P 5/19/2023

VNA Master MS202xC and MS203xC Quick Fact Sheet

Quick overview of the features, specifications, options, and accessories available in this 2 page flyer. PN: 11410-00627

Brochure pdf 1.4 MB Version: F 12/21/2022

Product Information, Compliance, and Safety for Anritsu Handheld Instruments

This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the equipment. P/N: 10100-00065

Datasheet pdf 1.4 MB Version: F 10/24/2022

VNA Master MS20xxC Help

Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00030 | OHS | F | 06/15/2020

Online Help System html 185.8 KB Version: F 6/15/2020

VNA Master MS20xxC User Guide

The VNA Master User Guide is part of a set of manuals that cover all of the instrument functions and their use. This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00305

User Guide pdf 11.0 MB Version: N 4/28/2020

Spectrum Analyzer Measurement Guide

This Measurement Guide describes the test and measurement functions of Anritsu RF and Microwave Handheld Instruments. Basic spectrum analyzer functions are included with most Anritsu handheld instruments. P/N: 10580-00349

Measurement Guide pdf 21.8 MB Version: P 4/28/2020

Rack Mount Accessory Installation Guide

This document provides instructions for mounting Anritsu handheld instruments in to the Anritsu Rack Mount Accessory, part number 66864. P/N:10580-00338

Installation Guide pdf 3.5 MB Version: C 2/7/2020

Power Meter Measurement Guide

This Measurement Guide documents the Power Meter and the High Accuracy Power Meter for the following Anritsu instruments: BTS Master, Site Master, Spectrum Master, and Cell Master. P/N: 10580-00240

Measurement Guide pdf 2.7 MB Version: J 1/16/2020

70774 Instrument Test Software Quick Start Guide

This quick start guide provides a brief overview of the installation and use of the 70774 Instrument Test Software with the following Anritsu handheld analyzers: VNA Master Models: MS2024B, MS2025B, MS2034B, MS2035B, MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, MS2038C, and LMR Master S412E.

Quick Start Guide pdf 815.7 KB Version: C 5/8/2018

Wireless Travel Router 2000-1752-R Installation Guide

This guide provides general information, configuration and operation instructions for the 2000-1752-R wireless travel router. P/N: 10580-00432

Installation Guide pdf 1.2 MB Version: D 9/25/2017

VNA Master MS20xxC Maintenance Manual

This manual provides service and maintenance information for the Anritsu MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C models of the handheld VNA Master.

Maintenance Manual pdf 23.3 MB Version: F 8/30/2017

Advanced VNA Cable Measurements Product Brief

This field brief discusses phase-matching cables, S-parameter definitions as they apply to cable characterization and other cable parameters such as Phase Shift and Group Delay. Advanced Time-Domain measurements will also be presented as enhancements to the well-known Distance-to-Fault (DTF) techniques. In addition, diagnostic tools like the Smith Chart will be briefly described. P/N: 11410-00685

Application Note pdf 3.3 MB Version: B 7/28/2017

Advanced VNA Cable Measurements Field Brief

This field brief will discuss phase-matching cables, S-parameter definitions as they apply to cable characterization and other cable parameters such as Phase Shift and Group Delay. Advanced Time-Domain measurements will also be presented as enhancements to the well-known Distance-to-Fault (DTF) techniques. In addition, diagnostic tools like the Smith Chart will be briefly described. P/N: 11410-00685

Application Note pdf 3.3 MB Version: B 7/27/2017

High Performance VNA Master Declaration of Conformity

The High Performance VNA Master Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00037

Datasheet pdf 25.2 KB Version: A 6/9/2017

System Verification Software (SVS) 2300-533-R Quick Start Guide

This quick start guide provides a brief overview of the installation and use of the 2300-533-R System Verification Software and the SC7858 and SC7859 Verification Kits with handheld VNA Masters.p>

Quick Start Guide pdf 1.1 MB Version: C 7/16/2013

By Document Type

Release History for VNA Master MS2036C

Release history for the VNA Master MS2036C Vector Network Analyzer firmware.

Drivers Software Downloads pdf 344.2 KB Version: v4.80 9/30/2025

Firmware Update for the VNA Master MS2036C

This firmware update contains the latest upgrades for your MS2036C Vector Network Analyzer. Once downloaded, run the file on your computer to see the installation instructions.

Drivers Software Downloads exe 38.2 MB Version: v4.80 9/30/2025

Anritsu Software Tool Box (Full Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer may not require internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools. This stand-alone installer will download all Anritsu software needed to install your chosen PC Tools software, and do so all in one file. This is ideal if you will be doing the installation on a computer without internet access. Windows 7, Windows 8 or Windows 10 computers may still need internet access to download the Microsoft .NET 3.5 suite of support files.

Drivers Software Downloads exe 389.5 MB Version: 1.21 8/13/2025

Release History for Anritsu Software Tool Box

Release history for the Anritsu Software Tool Box.

Drivers Software Downloads pdf 121.0 KB Version: 1.21 8/13/2025

70774 Instrument Test Software

Works with VNA Masters MS202xB, MS203xB, MS202xC, and MS203xC and LMR Master S412E.

Drivers Software Downloads zip 7.8 MB Version: 1.03 5/8/2018

Updating Anritsu Handheld Instrument Firmware

This document provides an overview of the firmware update process. For further details, please refer to the user guide for your Anritsu handheld instrument.

Drivers Software Downloads pdf 344.1 KB 10/30/2015

By Product Category

We have a MS2036C and have found we cannot change group delay per division to more than 260 ns. What is the limit?

The maximum is indeed limited to 260 ns. We generate Group Delay measurements by post-processing transmission phase data from the core VNA. Group Delay is correlated to the slope (rate of change) of the phase; the steeper the slope, the higher the Group Delay

Can you tell me the difference between the 2000-767-R and the 2000-1618-R?

The only difference is the frequency range. The 2000-767 is DC to 4 GHz and the 2000-1618-R is DC to 6 GHz. There is also a female 7/16 Open/Short/Load part number 2000-768-R and 2000-1619-R. 2000-768-R frequency range is DC to 4GHz and 2000-1619-R is DC to 6GHz.

How do I copy files from my internal memory to my USB memory stick?

  The steps below detail copying a file from internal memory to an external flash drive.   NOTE: Select the files to copy in the top window and the location for the files to be copied to in the bottom window.   Insert a USB drive into either USB Type A port of the Site Master.   From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below).   Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected.  NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key.   Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to.   Press the Copy key to copy the files to the flash drive.       NOTE:   If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”. 

How do I copy files from my internal memory to my USB memory stick?

  The steps below detail copying a file from internal memory to an external flash drive.   NOTE: Select the files to copy in the top window and the location for the files to be copied to in the bottom window.   Insert a USB drive into either USB Type A port of the Site Master.   From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below).   Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected.  NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key.   Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to.   Press the Copy key to copy the files to the flash drive.       NOTE:   If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”. 

How do I copy files from my internal memory to my USB memory stick?

The steps below detail copying a file from internal memory to an external flash drive. NOTE: Select the files to copy in the top window and the location for the files to be copied to in the bottom window. Insert a USB drive into either USB Type A port of the Site Master. From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below). Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected. NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key. Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to. Press the Copy key to copy the files to the flash drive. NOTE: If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”.

Is there a rack mount kit available for handheld instruments?

There is a rack mount kit available for current models of handheld instruments. The part number is 66864. This kit can be used with the following models: S331E, S332E, S361E, S362E, MT8221B, MT8222B, MT8212E, MT8213E, S412E, MS2024B, MS2025B, MS2034B, MS2035B, MS2026C, MS2028C, MS2036C, MS2038C, MS2722C, MS2723C, MS2724C, MS2725C, MS2726C, MS2711E, MS2712E, MS2713E, and MS2721B

Where can I find information on how to erase my product's memory?

Please contact your Sales Representative or Technical Support at 1-800-ANRITSU (1-800-267-4878) for memory erasure /letter of volatility information.