Skip to main content

Download Center

Search by product Model Number

By Document Type

Spectrum Master MS2720T Programming Manual

Programming instructions for the Anritsu Spectrum Master Model MS2720T RF and Microwave Handheld Spectrum Analyzer.

Programming Manual pdf 3.5 MB Version: F 10/11/2017

ShockLine MS46522B/524B Programming Manual

ShockLine VNAs support remote operation commanded over Ethernet. This manual provides operation and programming information for this activity.

This manual applies to the following models: MS46522B and MS46524B

Covering the following topics:
— Ethernet connection and setup instructions
— A general description of bus data transfer and control functions
— A listing of the IEEE 488 Interface Function Messages recognized by the VNA
— A brief description of the Ethernet program interface to the VNA
— A complete listing and description of all the Standard Commands for Programmable Instruments (SCPI) commands that can be used to control VNA operation, with examples of command usage applicable IEEE 488.2, System and Troubleshooting, and SCPI commands.

Programming Manual pdf 4.7 MB Version: L 10/3/2017

VectorStar MS464xB Programming Manual

This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet.

Programming Manual pdf 26.6 MB Version: N 7/14/2017

ShockLine MS46121A/B, MS46122A/B, MS46322A/B Programming Manual

ShockLine VNAs support remote operation commanded via the TCP/IP or VXI-11 protocols. This manual provides operation and programming information for this activity.

Programming Manual pdf 3.4 MB Version: V 7/11/2017

Vision Software MX280001A API Programming Manual

This documentation provides a description of the Anritsu’s Remote Spectrum Monitor (RSM) and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. API's are presented both for control of Anritsu's RSM hardware product line (MS2710XA) as well as for Vision software. Most features in Vision are paid options. In order for these options to work, the RSM hardware must have these options enabled. Please see the Vision software Product Brochure and User Guide for option information.

Programming Manual pdf 2.7 MB Version: A 5/4/2017

RF/Microwave Signal Generator MG3691C/93C SCPI Programming Manual

RF/Microwave Signal Generator MG369xC Programming Manual

Programming Manual pdf 2.8 MB Version: D 3/31/2017

RF/Microwave Signal Generator MG3691C/93C GPIB Programming Manual

RF/Microwave Signal Generator MG3691C/93C GPIB Programming Manual

Programming Manual pdf 3.4 MB Version: D 3/31/2017

Bluetooth Test Set MT8852B Remote Programming Manual

Remote Programming Manual for Bluetooth Test Set.

Programming Manual pdf 3.8 MB Version: V 3/6/2017

LMR Master S412E SCPI Programming Manual

This SCPI Programming Manual provides information for remote operation of the S412E LMR Master using commands sent from an external controller through the Ethernet or USB connection.

Programming Manual pdf 3.7 MB Version: R 2/15/2017

VectorStar MS464xB Programming Manual Supplement

This programming manual supplement provides information for remote operation of the VectorStar MS4640B Series VNA using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet for Anritsu Lightning 37xxxx and HP 8510 commands.

Programming Manual pdf 3.1 MB Version: E 9/30/2016

Site Master S3xxE, Spectrum Master MS271xE, and Cell Master MT821xE SCPI Programming Manual

This SCPI Programming Manual provides information for remote operation of the E series handheld instruments using commands sent from an external controller through the USB connection.

Programming Manual pdf 4.7 MB Version: R 8/5/2016

Microwave Site Master S820E SCPI Programming Manual

This SCPI Programming Manual provides information for remote operation of the Microwave Site Master S820E, Cable and Antenna Analyzer, using commands sent from an external controller through the USB or Ethernet connection.

Programming Manual pdf 2.9 MB Version: F 7/20/2016

BTS Master MT8220T Programming Manual

This SCPI Programming Manual provides information for remote operation of the Double click to edit High Performance Base Station Analyzer using commands sent from an external controller via Ethernet or USB connection.

Programming Manual pdf 3.1 MB Version: D 5/27/2016

Site Master S331L SCPI Programming Manual

This SCPI Programming Manual provides information for remote operation of the Site Master S331L, Cable and Antenna Analyzer, using commands sent from an external controller through the USB or Ethernet connection. This Programming Manual includes the following: An overview of the USB and Ethernet connections to the instrument. An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions. The IEEE common commands that are supported by the instruments. A complete listing and description of all the SCPI commands that can be used to remotely control functions of the instrument. The commands are organized by measurement mode starting in Chapter 3. This manual is intended to be used in conjunction with the Site Master S331L User Guide. Refer to the instrument user guide for general information about the instrument, including equipment setup and operating instructions.

Programming Manual pdf 2.2 MB Version: E 5/6/2016

VNA Master MS20xxC Programming Manual

This SCPI Programming Manual provides information for remote operation of the VNA Master Vector Network Analyzer (MS2026C, MS2028C, MS2036C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection.

Programming Manual pdf 3.7 MB Version: F 3/30/2016

RF/Microwave Signal Generator MG369xC SCPI Programming Manual

This manual provides information for remote operation of the Series MG369xC Synthesized High Performance Signal Generators using commands sent from an external controller via the IEEE-488 General Purpose Interface Bus (GPIB).

Programming Manual pdf 2.8 MB Version: D 3/18/2016

RF/Microwave Signal Generator MG369xC GPIB Programming Manual

This manual provides information for remote operation of the Series MG369xC Synthesized High Performance Signal Generator using commands sent from an external controller via the IEEE-488 General Purpose Interface Bus (GPIB).

Programming Manual pdf 3.4 MB Version: D 3/18/2016

PIM Master MW82119B Programming Manual

This SCPI Programming Manual provides information for remote operation of the PIM Master MW82119B, Passive Intermodulation (PIM) Analyzer, using commands sent from an external controller through the USB or Ethernet connection. This Programming Manual includes the following: An overview of the USB and Ethernet connections to the instrument. An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions. The IEEE common commands that are supported by the instruments. A complete listing and description of all the SCPI commands that can be used to remotely control functions of the instrument. The commands are organized by measurement mode starting in Chapter 3, “All Modes Programming Commands”. This manual is intended to be used in conjunction with the PIM Master MW82119B User Guide. Refer to the instrument user guide for general information about the instrument, including equipment setup and operating instructions.

Programming Manual pdf 2.4 MB Version: D 10/29/2015

VNA Master MS20xxB Programming Manual

This SCPI Programming Manual provides information for remote operation of the MS20xxB Vector Network Analyzer (MS2024B, MS2025B, MS2034B, and MS2035B) using commands sent from an external controller via Ethernet or USB connection.

Programming Manual pdf 3.0 MB Version: D 10/19/2015

VectorStar MS4640A Series VNA Programming Manual

This manual provides information for remote operation of the VectorStar MS4640A Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet.

Programming Manual pdf 25.4 MB Version: L 5/27/2015

By Document Type

Mobile InterferenceHunter Software MX280007A Release History

This release history document provides the updates and enhancements in each version release of the Mobile InterferenceHunter Software MX280007A.

Drivers Software Downloads pdf 257.5 KB Version: V2.02 12/1/2017

Firmware Update for the Site Master S820E

This firmware update contains the latest upgrades for your instrument. Once downloaded, run the file on your computer to see the installation instructions. Release History

Drivers Software Downloads exe 76.5 MB Version: 2.90 10/23/2017

Firmware Revision History for the S820E

Full firmware release history for the S820E Microwave Site Master.

Drivers Software Downloads pdf 117.7 KB Version: 2.90 10/23/2017

PowerSuite Remote User Interface

PowerSuite is a demonstration program for the Anritsu ML24xxA Power Meters written in Visual Basic 6.0. It shows the many features available to you when using our Power Meter by using a PC as an interface to the device via a GPIB card or the RS232 Serial port.

Drivers Software Downloads zip 34.4 MB Version: A 10/19/2017

MS9740A Software

The files in the folder are as follows:
Software update files
Download manual
Release note
Operation Manual/v19.0
Remote Operation Manual/v11.0
SCPI Remote Operation Manual/v3.0
Labview Driver

MD5 : 4832f125d94a765639656595ac407932

Drivers Software Downloads zip 23.2 MB Version: 1.05.06 10/17/2017

Software Revision History for the S331P

Software release history for the S331P Site Master Ultraportable Cable and Antenna Analyzer.

Drivers Software Downloads pdf 67.6 KB Version: 2017.10.2 10/17/2017

Software Update for the Site Master S331P

This software update contains the latest upgrades for your instrument. Once downloaded, run the file on your computer to see installation instructions.

Drivers Software Downloads exe 265.1 MB Version: 2017.10.2 10/17/2017

Software Revision History for the MS2760A

Complete software release history for the MS2760A Spectrum Master Ultraportable Spectrum Analyzer.

Drivers Software Downloads pdf 262.8 KB Version: 2017.10.1 10/16/2017

Software Update for the Spectrum Master MS2760A

This software update contains the latest upgrades for the Spectrum Master MS2760A Ultraportable Spectrum Analyzer.

Drivers Software Downloads exe 113.3 MB Version: 2017.10.1 10/16/2017

IVI-C Installation Files V2017.9.1

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software V2017.9.1.

Drivers Software Downloads exe 67.8 MB Version: 2017.9.1 10/4/2017

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the MS46121A/B, MS46122A/B, MS46322A/B, MS46522B and MS46524B Series ShockLine VNAs.

Note:
This installation may require your host to be re-booted to support updates to existing drivers.
This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.
For MS46122A using Windows 8, 8.1, or 10:
Before installing the ShockLine software, please follow the procedure outlined in the  manual driver

Drivers Software Downloads exe 178.9 MB Version: v2017.9.1 10/4/2017

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

Drivers Software Downloads pdf 81.9 KB Version: 2017.9.1 10/4/2017

MX9083x2_Firmware_v208_E

Firmware and documents for MT9083x2 are contained in the zip file.

MD5 : 94868c8e8a57b8f59e1dde489705f9ed

Drivers Software Downloads zip 37.4 MB Version: 2.08 9/28/2017

MU909060A_v308a_E

The following Firmware and documents for MU909060A are contained in the zip file (v3.08a).
(MU909060A:v3.08, MX909060A:v3.08.02)

MD5 : 2d70f5f3e3a766dafdf020df6ca5715e

Drivers Software Downloads zip 63.8 MB Version: 3.08a 9/21/2017

Release Note V9.00 (Illustration)

This is the illustrated version of MT1000A/MT1100A release note. Some contents of release note are explained with figure.

Drivers Software Downloads pdf 17.6 MB Version: 9.00 9/19/2017

MT1000A_Software

Software of MT1000A.
Use it when NOT using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

  • MU100010A 10G Multirate Module
  • MU100020A OTDR Module
  • MU100021A OTDR Module
  • MU100022A OTDR Module
  • MU100040A/B CPRI RF Module
  • MU100090A High-Accuracy GPS Disciplined Oscillator
The file size is large, so download after checking your bandwidth.

MD5 : 39cbc7a10b9d619063fd2112d80d7054

Drivers Software Downloads zip 453.1 MB Version: 9.00 9/19/2017

MT1100A_Software

Software of MT1100A.

MD5 : b223d8a129b7653bfb7b9ba75dfddeba

Drivers Software Downloads zip 682.5 MB Version: 9.00 9/19/2017

MX100001A windows control software

MX100001A windows control software.

MD5 : dcb3d42cc2e3b5d558af43cf5c71a60f

Drivers Software Downloads zip 64.7 MB Version: 9.00 9/19/2017

MX100001A windows control software

MX100001A windows control software.


MD5 : dcb3d42cc2e3b5d558af43cf5c71a60f

Drivers Software Downloads zip 64.7 MB Version: 9.00 9/19/2017

Network Master Pro/Flex Release Notes

Release information for the latest version of MT1000A/MT1100A

Drivers Software Downloads pdf 560.0 KB Version: 9.00 9/19/2017

By Product Category