Skip to main content

Anritsu FAQs

The sweep speed on my MS272xB, MS271xB, and MT8222A seems to have become much slower than it used to be. What can I do about this?

Some parameter or other setting probably has become set to a wrong value. The easiest way to fix this is to reset the instrument to factory default settings. Do this by turning off the instrument, then hold down the Esc and press the On/Off button. Hold down the Esc button for a few seconds after releasing the power button. All the parameters are set to factory default values. No saved measurements, settings, or limit lines are erased by doing this. This same result can be achieved by pressing | Shift | System | System Options | Reset | Factory Defaults |.

Related Links

FAQ Feedback

FAQ Feedback
Does this FAQ answer your question?*
How do you rate the quality of this content?*
If you would like to be contacted by an Anritsu representative, please let us know the best way to reach you.