Skip to main content
<i>Bluetooth</i> Test Set MT8852B

Bluetooth Test Set

MT8852B
Overview
What's NEW
  • Support the latest Standard Bluetooth® v5.1 (AoA/AoD)   NEW
  • Measurements performed as defined in the Bluetooth RF test specification
  • Compliant with Bluetooth Core Specifications v5.1
  • Qualified by Bluetooth SIG for RF measurements
  • Supports 9 Basic Rate and 8 EDR test cases
  • Supports 24 Bluetooth low energy test cases
  • Single script runs Basic Rate, EDR and Bluetooth low energy tests
  • Audio testing capability. Three SCO channels with µ-Law, A-Law and CVSD air interface
  • BlueSuite Pro3 software provides graphical traces of modulation, power ramp, individual channel measurements, and receiver sensitivity search
  • Adaptive Frequency Hopping (AFH) test function for Bluetooth devices
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Anritsu is under license.
What's NEW
  • Support the latest Standard Bluetooth® v5.1 (AoA/AoD)   NEW

The Bluetooth Test Set MT8852B is the market leading RF measuring instrument for design proving and production test of a wide range of products that integrate Bluetooth®  technology. It supports Basic Rate (BR), Enhanced Data Rate (EDR) and Bluetooth low energy (BLE) measurement of transmit power, frequency, modulation, and receiver sensitivity required by Bluetooth RF test specification.
In production, a single key press initiates a measurement script that tests a device in less than 10 seconds.

       Bluetooth_tester

  Measurements performed as defined in the Bluetooth RF Test Specification

  • Measurements performed in Bluetooth test mode - Loopback or Tx mode supported
  • Initialization and control of test devices through UART, USB or USB-Adaptor HCI control interface
  • Built-in support for Bluetooth low energy 2-Wire control interface
  • BR/EDR/Bluetooth low energy dirty transmitter for receiver sensitivity test cases


  2 Mbps Low Energy PHY (2LE) and Bluetooth Long Range (BLR) tests

Adding this option supports the 2 Mbps Low Energy PHY (2LE) tests expected to improve dramatically improve battery life and Bluetooth Long Range (BLR) tests supporting communications beyond a range of 500 m that are both included in Bluetooth Core v5 specifications or later.



  Adaptive Frequency Hopping inspection function

The Adaptive Frequency Hopping (AFH) option facilitates analysis of interference from, and co-existence with, interfering signals such as WLAN. This option provides graphical displays of FER and masked channels when interfering signals are introduced, allowing optimization of hardware designs.



  Angle of Arrival/Angle of Departure tests

Adding this option supports Angle of Arrival / Angle of Departure that is included in the new Bluetooth Core v5.1 specification.



The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Anritsu is under license.

Bluetooth

Library
VIDEOS