BERTWave™

MP2100A

This product has been discontinued Replacement Model(s) : MP2100B

Downloads

Overview
Lineup
Library

Overview

Features
Description

All-in-one BER and Eye Pattern Measurements
High-speed Remote Tests
Supports Electrical and Optical Interfaces
High-speed Mask Tests
Easy Operability, Flash Disk Drive, and Eco-friendly
All-in-one unit supporting simultaneous Jitter, Eye Pattern and Eye Mask measurements
Supports all WDP measurements
Simultaneous sampling and ideal Equalizer/Emphasis value calculation with Eye display
Simultaneous Eye Pattern, Eye Mask and Jitter Measurements for simulation waveform

The MP2100A is an all-in-one BERT and Eye/Pulse Scope solution for evaluating optical active devices in optical communication systems.
To meet the need for the fastest possible measurement speeds on production lines for active optical devices, the Gating Time has been slashed by 90% compared to conventional BERT equipment using remote commands and the Eye/Pulse Scope function is 300% faster. In addition, measurement times are much shorter due to the simultaneous BER measurement and Eye pattern analysis.

The MX210001A Jitter Analysis Software has a new, high-speed, jitter-measurement function supporting all-in-one measurements, such as simultaneous jitter analysis, and Eye pattern measurement and Eye mask test measurements. Moreover, the high-speed sampling increases measurement efficiency by cutting measurement time. And Combining the MX210001A with MATLAB^® supports WDP, TWDP and dWDP measurements for evaluating the waveform dispersion of specific signals.

Adding the MX210002A Transmission Analysis Software to the BERTWave supports Tx analyses (S₂₁ Gain, Phase), and waveform simulation (de-embedded) using linear equalizer, filter, and emphasis operations; simultaneous waveform sampling and simulation support simultaneous Eye pattern measurement and Eye mask test measurements. Furthermore, combined tracking with the MX210001A software permits simultaneous post-simulation waveform jitter measurement.

MATLAB^® is a trademark of The MathWorks Inc.

Look at this comparison.

All-in-one PPG, ED, Scope, and Optical IF for incredible, space-saving compactness

＞＞＞Click here for details about the BERTWAVE PE supporting BER measurements.

＞＞＞Click here for details about the BERTWAVE SS supporting EYE/Pulse Scope measurements.

BERTS

Operation bit rate	With MP2100A/MP2101A-090	Without MP2100A/MP2101A-090
	PPG, ED Common; Variable bit-rate range (1 kbit/s step) 8 Gbit/s to 12.5 Gbit/s 1/N bit-rate operation range N=2: 4 Gbit/s to 6.25 Gbit/s N=4: 2 Gbit/s to 3.125 Gbit/s N=8: 1 Gbit/s to 1.5625 Gbit/s N=16: 500 Mbit/s to 781.25 Mbit/s N=32: 250 Mbit/s to 390.625 Mbit/s N=64: 125 Mbit/s to 195.312 Mbit/s	PPG; Variable bit-rate range (1 kbit/s step) 8.5 Gbit/s to 11.32 Gbit/s 1/N bit-rate operation range N=2: 4.25 Gbit/s to 5.66 Gbit/s N=4: 2.125 Gbit/s to 2.83 Gbit/s N=8: 1.0625 Gbit/s to 1.415 Gbit/s N=16: 531.25 Mbit/s to 701.5 Mbit/s N=32: 265.625 Mbit/s to 353.75 Mbit/s N=64: 132.813 Mbit/s to 176.875 Mbit/s ED; Variable bit-rate range (1 kbit/s step) 8.5 Gbit/s to 11.32 Gbit/s 4.25 Gbit/s to 5.66 Gbit/s
Test Pattern	PRBS: 2⁷-1, 2⁹-1, 2¹⁵-1, 2²³-1, 2³¹-1, (Invert ON/OFF), USER Data: 1.3 Mbit programmable (sample pattern file such as CJPAT and so on)
Electrical Data Output	Data, Xdata
Amplitude	0.1 Vp-p to 0.8 Vp-p
Electrical Data Input	Data, Xdata (Option 001), Data (Option 003)
Amplitude	0.1 Vp-p to 0.8 Vp-p
O/E Input (Option 003)	Optical Data
Wavelength Range	750 nm to 1650 nm
XFP Slot (Option 050)	XFP Slot
SFP+ Slot (Option 051)	SFP+ Slot

EYE/Pulse Scope

Bandwidth (-3 dB)	DC to 20 GHz minimum, DC to 25 GHz Typical
Display	Eye Pattern, Pulse Pattern
Measurement Function	Statistical (NRZ), Histogram, Mask Compliance
Sampling Speed	100 K samples/sec, Typical
O/E Input (Option 003)	Optical Data
Wavelength Range	750 nm to 1650 nm
Clock Recovery (Option 055)	0.1 GHz to 2.7 GHz, 8.5 GHz to 12.5 GHz

MX210001A Jitter Analysis Software

Operating Conditions	Operates only when installed in MP2100A/MP2102A with correct license information The installer runs with V3.00.00 or later Other use conditions comply with MP2100A series The WDP runs under MATLAB R2010b SP1
Measurement Algorithm	Histogram mode, Pattern Search mode
Histogram mode
Measurement Items	TJ (1.0E-12), TJ (user defined), RJ (d-d), DJ (d-d), DDPWS, J2 jitter analysis, J9 jitter analysis, Eye opening
Pattern Search mode
Measurement Items	TJ (1.0e-12), TJ (user defined), RJ (d-d), RJ (rms), DJ (d-d), PJ (p-p), DDJ (p-p), DCD, ISI (p-p), Eye opening, J2 jitter analysis, J9 jitter analysis, DDPWS, PJ Frequency
WDP Measurement	Requires installation of MATLAB 2010b by MathWorks
Measurement Items	WDP, dWDP, TWDP, dTWDP, WDPc, dWDPc, TWDPc, dWDPc

MX210002A Transmission Analysis Software

Operating Conditions	Operates only when installed in MP2100A with correct license information The installer runs with V3.00.00 or later Other use conditions comply with MP2100A series
Measurement Mode	Transmission analysis, Waveform estimation
Transmission Analysis
Measurement Items	Gain graph, Phase graph, Group delay graph (Phase graph and Group delay graph switching display)
Waveform Estimation
Equalizer Setting	Selects reflector, non-reflector at calculation
Emphasis Format	2Post/1Pre, 3Post, 1Post/1Pre, 2Post, 1Post
Device Character	Reads S2P File
Jitter Analysis	Displays estimated waveform calculation results at MX210001A (when MX210001A installed in MP2100A)

Lineup

MP2100A BERTWave

The MP2100A BERTWave is the all-in-one BERT and Eye/Pulse Scope measurement solution. Simultaneous BER measurement and Eye-pattern analysis cuts measurement times by eliminating time-consuming setup. The MP2100A series is the ideal all-in-one solution supporting both R&D and manufacturing.

MP2101A BERTWave PE

MP2101A BERTWave PE

The MP2101A BERTWave PE is the solution just for BER measurements. Expanding the BERTWave PE to 2 channels supports easy, efficient, simultaneous TRx measurements by eliminating complex line changes. Moreover, all-in-one support for PPG/ED crosstalk tests cuts measurement times and setup costs.

＞＞＞Click here for details about the MP2101A BERTWave PE

MP2102A BERTWave SS

MP2102A BERTWave SS

The MP2102A BERTWave SS is the ideal solution just for high-speed EYE pattern analysis using the built-in clock recovery function which supports evaluation of the optical characteristics of long-distance transmission equipment and devices with no clock output. Built-in time/amplitude test, histogram analysis, and mask/mask margin test functions make it the perfect solution for signal quality analyses.

＞＞＞Click here for details about the MP2102A BERTWave SS

Software

-Jitter Analysis Software-

The MX210001A Jitter Analysis Software has a new, high-speed, jitter-measurement function supporting all-in-one measurements, such as simultaneous jitter analysis, and Eye pattern measurement and Eye mask test measurements.
Moreover, the high-speed sampling increases measurement efficiency by cutting measurement time. And Combining the MX210001A with MATLAB supports WDP, TWDP and dWDP measurements for evaluating the waveform dispersion of specific signals.

＞＞＞Click here for details about the MX210001A Jitter Analysis Software

-Transmission Analysis Software-

MX210002A Transmission Analysis Software to the BERTWave supports Tx analyses (S21 Gain, Phase), and waveform simulation (de-embedded) using linear equalizer, filter, and emphasis operations; simultaneous waveform sampling and simulation support simultaneous Eye pattern measurement and Eye mask test measurements. Furthermore, combined tracking with the MX210001A software permits simultaneous post-simulation waveform jitter measurement.

＞＞＞Click here for details about the MX210002A Transmission Analysis Software

Related Links

Library

Brochure

Brochure	Release Date
Jitter Analysis Software MX210001A / Transmission Analysis Software MX210002A	1/5/2016
MP2100A BERTWave Series - Brochure	11/15/2013

Application Note

Application Note	Release Date
Ideal Remote-Control Sequences	10/31/2014
Jitter Analysis - Basic Classification of Jitter Components using Sampling Scope	6/29/2012
Ideal Pre-Emphasis Constant Setting	12/8/2011
Anritsu Optical Module Test Solutions (MP2100A BERTWave Series)	5/7/2010
Anritsu Optical Module Test Solutions (MP2100A BERTWave Series)	4/27/2010

Product Introduction

Product Introduction	Release Date
MP2100A BERTWave Series - Product Introduction	11/14/2013
MX210001A Jitter Analysis Software/MX210002A Transmission Analysis Software Product Introduction	12/8/2011
EYE/Pulse Scope User Defined Mask Files	1/11/2011
PPG/ED Bit Rate Expansion Option, Low Pass Filter Option	10/29/2010

Leaflet

Leaflet	Release Date
ESD Protection Adapter J1678A, J1679A	7/14/2017
125 M to 12.5 Gbit/s BERT (MP2100A/MP2101A-090 PPG/ED Bit Rate Extension for PPG/ED)	11/14/2013
156 M to 11.3 Gbit/s Bessel LPFs for EYE Mask Testing (MP2100A/MP2102A-061 to 085 Low Pass Filter Options)	11/14/2013
J1512A 7.5 GHz Passive Probe Set	11/14/2013
Ideal for LTE CPRI v4.1 Optical Module Evaluation	11/14/2013
External CDR Board for Eye Pattern Measurement (G0301A External CDR Board (<2.667G))	11/16/2012
For 10G-Band Optical Module Eye Mask	11/2/2012
Evaluation Transmission Characteristics of over Gbps Connectors/Cables	2/3/2012
Transmission Equipment Maintenance and Evaluation Solution	1/24/2012
MP2100A-052/MP2101A-052 Full Rate Clock Output Option	12/8/2011
MP2100A-091/MP2101A-091 ED High Sensitivity Option	12/8/2011
MX210001A Jitter Analysis Software	8/31/2011
MX210002A Transmission Analysis Software	8/31/2011
MX180001A SONET/SDH Pattern Editor, MX180003A GbE/10GbE Pattern Editor	5/25/2011
Active Optical Cable (AOC) Measurement Solution Simultaneous 12-channel EYE & BER Measurements	10/8/2010
Total Solution for Optical Module Evaluation	2/19/2010
Transmission Equipment Physical Layer Evaluation Reduction Setup Costs	2/19/2010
All-in-One Solution for Simultaneous TRx Measurements and Crosstalk Tests	2/19/2010

Technical Note

Technical Note	Release Date
Selecting Tools at Measurement of High-Speed Digital Signals	7/14/2017
Using the Eye Pattern to Troubleshoot Signal Impairments	8/15/2012
Intrinsic Jitter Correction for Jitter Measurements	6/29/2012
Enabling Precision EYE Pattern Analysis (Extinction Ratio, Jitter, Mask Margin) (MP2100A Series BERTWave)	5/20/2011

Quick Reference Guide

Quick Reference Guide	Release Date
Procedure for Calculating Extinction Ratio Correction Factor	11/13/2014

Operations Manual

Operations Manual	Release Date
BERTWave Series Remote Control Operation Manual	7/11/2022
MP2100A/MP2101A/MP2102A BERTWave Operation Manual	1/13/2016
MX210001A Jitter Analysis Software Operation Manual	1/13/2016
MX210002A Transmission Analysis Software Operation Manual	1/13/2016

User Guide

User Guide	Release Date
MP210xA/MP2100B/MP2110A Security Update against WannaCrypt Ransomware Installation Instructions	6/9/2017

VIDEOS