Skip to main content
mp1900a-signalqualityanalyzer

Signal Quality Analyzer-R

MP1900A
Overview

downloadView Product BrochuredownloadView Product IntroductionplayVideo

Outline

To cope with increasing data traffic caused by the widespread popularity of smartphones and mobile terminals, data-center network interfaces are being transitioned to the faster 200 and 400 GbE standards, while communications-equipment interconnects are adopting PCI Express Gen4 supporting faster speeds of 16 Gbit/s; multi-channel technologies are also being deployed.
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high-performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.

[Target Applications]
100 GbE/200 GbE/400 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fibre Channel, PCI Express Gen 1 to 5, Thunderbolt 3, USB3.1 Gen1/2, Optical modules, SERDES, AOC, High-speed Interconnects

Anritsu MP1900A BERT for Ethernet and PCI Express of data-center

downloadView Product BrochuredownloadView Product Introductiondownload.jpgVideo

  • 512 Gbit/s max. transmission capacity, one main frame expandable to 16ch (filling 8 slots with 32 Gbit/s 2 ch PPG)
  • All-in-one support for both high-speed Ethernet and PCI Express interface tests
  • New wideband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
    • Bit rate of 2.4 Gbit/s to 32.1 Gbit/s
    • NRZ/PAM4 Support
    • 10Tap Emphasis
    • Variable ISI function
    • Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidths)
    • Low Intrinsic Jitter output of random Jitter 115 fs rms (typ.)
    • High-sensitivity Data input of 15 mV typ. (EYE Height)
    • 1ch/2ch Selection
  • PCI Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
  • USB Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
  • Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
  • Voltage Noise Addition function (Common/Differential/White Noise, using MU195020A/MU195050A)
Anritsu MP1900A BERT for  Mulit-channel NRZ and PAM4 solutions ,32Gbaud ,64Gbaud
Specifications

downloadView Data Sheet

Typical Specifications

  • Signal Quality Analyzer-R MP1900A
Item Specification
LCD 12.1-inch, WXGA 1280 x 800
Remote Interface GPIB, LAN
Module Slots 8
External Peripheral I/F USB x6, VGA x1, HDMI x1
OS Windows Embedded Standard 7
Power 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac)
50 Hz to60 Hz
Power Consumption 1350 VA max.
Dimensions/Mass 340 (W) x 222.5 (H) x 451 (D) mm/20 kg max. (excluding modules)
  • 21G/32G bit/s SI PPG MU195020A
Item Specification
Operation Bit Rate 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
No. of Channels 1 or 2
Output Amplitude 0.1 Vp-p to 1.3 Vp-p (Single-end)
0.2 Vp-p to 2.6 Vp-p (Differential)
Emphasis 10Tap
Channel Emulator Normal: Emulates Insertion Loss using S-parameters
Inverse: Performs De-Emphasis compensation for S-parameter Insertion Loss
S-Parameter file: S2P,S4P
ISI Emulates output for ISI using CEI-28G/25G Nyquist frequency loss setting
Supports loss control in combination with J1758A ISI Board accessory
Insertion Loss setting:1.5 to 25 dB, 0.01 dB step, Nyquist frequency
0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency
Tr/Tf (20% – 80%) 12 ps (typ.)
Random Jitter 115 fs rms (typ.)
PCIe Link Training Supported (MX183000A-PL021)
I/O Connector K (f)
  • 21G/32G bit/s SI ED MU195040A
Item Specification
Operation Bit Rate 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
No. of Channels 1 or 2
Input Amplitude 0.05 Vp-p to 1.0 Vp-p (Single-End)
0.1 Vp-p to 2.0 Vp-p (Differential)
Input Sensitivity 15 mV (Eye Height 28.1 Gbit/s)
CTLE Peak Frequency 14, 8, 4 GHz
Gain 0 to –12 dB
Clock Recovery Yes, SSC support
PCIe Link Training Supported (MX183000A-PL021)
I/O Connector K (f)
  • Noise Generator MU195050A
Item Specification
No. of Channels 2
Insertion Loss -3 dB
CMI 0.1 GHz to 1 GHz/1 GHz to 6 GHz
DMI 2 GHz to 10 GHz
White Noise 10 MHz to 10 GHz
Crest Factor >5

Modules for the MP1800A series (MU181000B, MU181500B, etc.) can be used in the MP1900A. Refer to the MP1900A brochure and selection guide for more details. Refer to the MP1800A brochure for the specifications of modules used by the MP1800A series.

Library
VIDEOS
MP1900A_E

Signal Quality Analyzer MP1900A
The Signal Quality Analyzer-R MP1900A series is a high-performance BERT with excellent expandability for supporting Physical layer evaluations.

Related Product