Skip to main content
射頻/微波訊號發生器 MG3690C



The MG3690C series of broadband signal generators covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 500 GHz or beyond, with external multipliers. In addition, it is easy to operate either through intuitive front panel controls or remotely via GPIB or Ethernet connectivity. Thus, the MG3690C series is an ideal signal source for both RF and microwave requirements, fully configurable for simple to high performance applications.

The MG3690C offers three levels of SSB phase noise performance; Standard, Ultra low phase noise (option 3) and Premium phase noise (option 3X). The MG3690C also has an optional full suite of modulation capabilities including AM, FM, Phase and Pulse to address simple to complex signal simulation requirements.

  • 業界最佳寬頻率覆蓋
  • Three tiers of Phase Noise performance
  • 業界最佳脈衝調變
  • 切換速度快
  • 全面模擬調變
  • 輸出功率高
  • 可配置性高
  • 可靠性高
在單次同軸輸出中頻率範圍為 0.1 Hz ~ 70 GHz
Three tiers of Phase Noise performance to address simple to complex applications 非常適用于 LO 替代和時脈生成應用
100 ns 穩定脈衝寬度和 10 ns 解析度,並且具備生成單脈衝、雙脈衝、三脈衝和四脈衝的能力
5 ms(典型值)
內部和外部 AM、FM、相位和脈衝調變
輸出功率高 無需任何外部擴展,從而節省成本
可配置性高 可根據您目前的應用和預算從眾多選件中選擇合適的系統配置,’同時保留將來更新的價值
可靠性高 為期 3 年的標準質保 縮短停工時間
Option Description
MG3692C Signal Generator, 2 GHz to 20 GHz
MG3694C Signal Generator, 2 GHz to 40 GHz
MG3695C Signal Generator, 2 GHz to 50 GHz
MG3697C Signal Generator, 2 GHz to 67 GHz (operational to 70 GHz)
MG3690C/1A Option 1A, Rack Mount with slides
MG3690C/1B Option 1B, Rack Mount without slides
MG3690C/2x Option 2x, Mechanical Step Attenuator
MG3690C/3 Option 3, Ultra Low Phase Noise, improved Standard Phase Noise
MG3690C/3X Option 3X, Premium Phase Noise - improves option 3 (< 1 kHz offset)
MG3690C/4 Option 4, extends frequency coverage from 8 MHz to 2.2 GHz
MG3690C/5 Option 5, extends frequency coverage from 8 MHz to 2 GHz
MG3690C/6 Option 6, Analog Sweep Capability
MG3690C/9X Option 9, Rear Panel Output
MG3690C/10 Option 10, User-Defined Modulation Waveform Software
MG3690C/12 Option 12, Frequency and Phase
MG3690C/14 Option 14, Amplitude Modulation
MG3690C/15x Option 15x, High Power
MG3690C/16 Option 16, High Stability Time Base
MG3690C/17 Option 17, Delete Front Panel
MG3690C/22 Option 22, extends frequency coverage from 0.1 Hz to 10 MHz
MG3690C/26x Option 26x, Pulse modulation
MG3690C/27 Option 27, Internal LF and Pulse Generators
MG3690C/28x Option 28x, Analog Modulation Suite
MG3690C/36 Ultra-Stable Phase Tracking
MG3690C/CE Compliance with CE mark
MG3690C/98 Standard Calibration to ISO 17025 and ANSI/NCSL Z540-1
MG3690C/99 Premium Calibration to ISO 17025 and ANSI/NCSL Z540-1 with test report and uncertainty data

x - Option designation varies with MG3690C model
Confirm your country below to see local events, contact information and special offers.