Signal Analyzer MS2840A-040/041 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 3.6 GHz/6 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, dedicated options for MS2840A-040/041 greatly enhance their performance to exceed that of other makers’ high-grade models (–133 dBc/Hz at measurement frequency of 500 MHz and offset frequency of 10 kHz). The standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software, analog measurement software, vector/analog signal generator options support evaluation of various digital and analog wireless equipment/devices and also adds functions for measuring amplifier noise figure (NF) values.
摺頁冊
pdf 5.1 MB
2022/5/25
Signal Analyzer MS2840A-044/046 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 26.5 GHz/44.5 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models* and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, the standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software and analog measurement software options support evaluation of various digital and analog wireless modulation signals and also adds functions for measuring amplifier noise figure (NF) values. Further, connecting the separately sold High Performance Waveguide Mixer enables spectrum measurements between 50 and 90 GHz for wideband wireless equipment, radar, etc.
摺頁冊
pdf 4.4 MB
2022/5/25
The New Radio RF Conformance Test System ME7873NR is a RF Conformance Test (RFCT) platform for RF transmitter / receiver characteristics, performance requirements, and RRM testing of 5G mobile devices compliant with 3GPP standards. Based on the solid and trusted achievements selected and used by customers around the world in the 3G (W-CDMA) and 4G (LTE) era, we will continue to release timely test cases for 5G.
摺頁冊
pdf 2.2 MB
2022/5/25
This is the product brochure for Signal Analyzer MS2850A and the related products.
(MS2850A and options, 5G/LTE/W-CDMA/GSM Measurement Software, etc.)
MS2850A has the analysis bandwidth and excellent flatness performance needed for development and production of next-generation broadband communications systems such as 5G in an all-in-one middle-price-range spectrum analyzer/signal analyzer platform.
摺頁冊
pdf 4.4 MB
2022/5/25
This Configuration Guide explains how to order the new MS2840A and MS2840A retrofit options and measurement software.
設定指南
pdf 407.4 KB
2022/5/25
The Signal Analyzer MS2830A-044/045 includes a spectrum analyzer function with upper frequency limits of 26.5 GHz and 43 GHz.
Combining it with the External Mixer MA2740C/MA2750C series supports measurements up to 325 GHz. Additionally, the excellent dynamic range and wide measurement span required for measuring wireless backhaul and automotive radar are supported by the High Performance Waveguide Mixer MA2808A (60 to 90 GHz). It supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counts, as well as spurious measurements.
摺頁冊
pdf 4.2 MB
2022/5/18
The MS2830A is a high-speed, high-performance, cost-effective Spectrum Analyzer/Signal Analyzer. Not only can it capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains.
摺頁冊
pdf 5.9 MB
2022/5/18
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
摺頁冊
pdf 5.9 MB
2022/5/18
Configuration Guide for the MS2830A Signal Analyzer
設定指南
pdf 606.9 KB
2022/5/18
Product Introduction for the Signal Analyzer MS2830A
產品介紹
pdf 6.0 MB
2022/5/18
Optical transceivers required by Large-scale networks, such as 100/400 GbE, are securing bandwidth using multichannel parallel processing. Consequently, all-at-once multichannel measurement is extremely effective for improving productivity. The BERTWave MP2110A featuring fast measurement speeds and high sensitivity not only assures high efficiency but also improves productivity by addition of the Quad Optical Scope option to halve measurement costs per channel compared to previous instruments.
傳單
pdf 456.1 KB
2022/5/16
Installing this option makes it easy to configure a versatile production line for testing both SMF and MMF
optical transceivers using Anritsu’s powerful all-in-one MP2110A.
傳單
pdf 250.9 KB
2022/5/16
With a built-in BERT (for Bit Error Rate measurements) and a sampling oscilloscope (for Eye pattern analysis) the All-in-one BERTWave MP2110A is optimized for manufacturing 100 GbE and 25 GbE optical modules.
The BERTWave MP2110A will improve optical module production efficiency and reduce manufacturing costs.
摺頁冊
pdf 4.5 MB
2022/5/13
The portable MT1040A tester supports 400G Ethernet. This Data Sheet describes the MT1040A hardware specifications, including 400G Ethernet, as well as details of functions.
資料表
pdf 2.0 MB
2022/5/11
This solution flyer discusses how the Polar Instrument solution and Anritsu VNAs have unique capabilities for making Delta-L PCB measurements which helps customers make quick and accurate measurements results. P/N: 11410-02880
摺頁冊
pdf 1.8 MB
Version: A
2022/5/11
The all-in-one portable MT1040A tester for 400G Ethernet also supports up to 100G Ethernet and OTN networks. Installing the OTDR module enables optical-fiber continuity tests as well. This Catalog describes typical MT1040A use cases as well as ordering information.
摺頁冊
pdf 5.2 MB
2022/5/11
In the signal integrity world, one of the most useful features is network extraction. Anritsu's ShockLine vector network analyzers provide full features on different scenarios to extract fixtures based on incomplete known standards. This application note discusses the completed functionality to perform 2x-thru with a ShockLine vector network analyzer along with equation editor. P/N: 11410-02882
應用說明
pdf 4.0 MB
Version: A
2022/5/11
The Analog Measurement Software MX269018A is software for measuring the TRx performance of radio equipment using analog modulation (FM/ΦM/AM). The Signal Analyzer MS2830A supports all-in-one tests of key analog wireless TRx characteristics using the built-in optional analog signal generator and audio analyzer. The Signal Analyzer MS2840A supports tests of key analog wireless Tx characteristics.
產品介紹
pdf 2.4 MB
2022/5/11
This manual discusses the MA25101A IQ Streaming PCIe kit hardware and software installation and use of the MX280006A IQ Acquisition Tool. P/N: 10580-00476
使用者手冊
pdf 4.8 MB
Version: B
2022/5/10
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00074 | OHS | version A | 05/10/2022
線上說明系統
html 184.9 KB
Version: A
2022/5/10
