In the scenario to automate testing of the Layer 2 control protocols (L2CP), Network Master Pro MT1000A/MT1040A generates L2CP traffic with various Layer 2 protocols in carrier Ethernet network, measures the frame loss, and displays as easy-to-understand color-coded Pass/Fail icons.
Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617
The Optical-Transceiver Quick Check scenario is used for diagnosing standalone optical transceivers, such as the QSFP-DD, QSFP28, SFP28, etc., using the MT1000A/MT1040A. The key measurement items: Bit error measurements using optical-fiber loopback, Read-out and confirmation of status of optical transceiver internal registers, and, Measurement of FEC correction margin (400G only).
The use of scenarios, that automates bit error rate (BER) testing, are expected to facilitate efficient testing in WDM networks using the Network Master Pro MT1000A/MT1040A. The BER testing scenarios are applied to Ethernet, SDH/SONET, OTN, and Fibre Channel standards.
MT1000A/MT1000A/MT1040A remote operation manual.
This is the operation manual of the MT1000A Transport.
This is the operation manual of the MT1000A OTDR.
The MU100020A/MU100021A/MU100022A are OTDR modules for the MT1000A Network Master Pro platform, which
incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition,
simultaneous installment of the 10G/100G Multirate Module MU100010A/MU100011A supports OTDR/CPRI measurements
in strong demand by the mobile fronthaul market.
The Network Master Pro MT1000A is an all-in-one handy measuring instrument with various integrated functions for finding faults in optical fibers and for quality analysis of data carried over Ethernet, OTN, CPRI, etc., networks.
The MT1000A is configured as a combination of various measurement modules. It is designed to support a combination of selected measurement modules and options with the main unit.
The Network Master Pro MT1000A with optical-fiber event detection is an all-in-one multifunctional handy tester for data quality analysis of Ethernet, OTN, CPRI, etc., networks. With clearly visible 9-inch touch-panel, compact on-site portability in one hand, and easy operation, it has all the functions needed for network installation and maintenance while being convenient to manage and use.
The introduction of transport module that can be mounted on MT1000A.
The MU100010A and MU100011A provide functions and performance at speeds from 1.5 Mbps to 10 Gbps, and from 10 Mbps to 100 Gbps, respectively, for installing and maintaining communications networks.
The all-in-one Network Master Pro MT1000A is for earlier Ethernet network technologies with speeds up to 100G. Combination with the 10G Multirate Module MU100010A option supports all functions, performance and tests needed for installation and maintenance (I&M) of communication networks with speeds ranging from 1.5 Mbps to 10 Gbps. The 100G Multirate Module MU100011A option supports up to 100 Gbps.
This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.
Cross-border communications are expanding with construction of edge-computing sites and data centers. Securing the quality of submarine network cables, which facilitate high-capacity, high-speed and low-latency communications, is becoming more important. Submarine networks are being upgraded and
many new landing stations are also being built to meet these requirements.
This leaflet describes tests solutions for Submarine-Cable I&M.
Open source licences
This is manual of MX100003A MT1000A/MT1100A/MT1040A Scenario Edit Environment Kit.
The rapid spread of smartphones and cloud services is increasing the importance of networked services. Offering better services requires both value-added services as well as better network service quality, so assured network service level agreements (SLA) are becoming a prerequisite contract condition.
The MT1000A Network Master Pro is an all-in-one transport tester for running commissioning tests, including evaluating the Ethernet service back to the SLA.
Introduces Anritsu 5G solutions and products.
Anritsu will contribute to customer's 5G product development and future innovation of network.
Anritsu’s Network Master Pro MT1000A supports PTP/SyncE tests in the Synchronization plane (S-plane) and covers solutions for O-RAN O-DU and O-RU fronthaul S-plane conformance tests as well as transport network test cases described in the WG4 and WG9 documents.
The compact, battery-powered and easy-to-use Network Master Pro MT1000A with 10G Multirate Module MU100010A has everything in a single, handy tester needed to install and maintain communication networks from 1.5 Mbps to 10 Gbps.