MX370114A/MX269914A 5G NR FDD sub-6GHz IQproducer™ is software used to generate
waveform patterns conforming to the 3GPP 5G NR specifications.
조작 메뉴얼
pdf 1.9 MB
Version: 3
2026/06/24
This describes basic operations and functions of the HSDPA/HSUPA
IQproducerTM.
조작 메뉴얼
pdf 1.8 MB
Version: 9
2026/06/24
This operation manual describes the functions of the IQproducerTM, except for the signal generation application.
조작 메뉴얼
pdf 4.6 MB
Version: 15
2026/06/24
This describes basic operations and functions of the Multi-carrier IQproducerTM.
조작 메뉴얼
pdf 2.0 MB
Version: 10
2026/06/24
MX370108A/MX269908A LTE IQproducer is software used to generate waveform patterns conforming to the 3GPP LTE FDD specifications.
조작 메뉴얼
pdf 5.9 MB
Version: 15
2026/06/24
MX370110A/MX269910A LTE TDD IQproducer is software used to generate waveform patterns conforming to the 3GPP LTE TDD specifications.
조작 메뉴얼
pdf 6.0 MB
Version: 11
2026/06/24
This describes basic operations and functions of the Mobile WiMAX
IQproducerTM.
조작 메뉴얼
pdf 3.0 MB
Version: 11
2026/06/24
WLAN IQproducer is software used to generate waveform patterns conforming to the IEEE Std 802.11-2007 and IEEE Std 802.11n-2009 specifications.
조작 메뉴얼
pdf 3.5 MB
Version: 9
2026/06/24
The MX370112A/MX269912A TD-SCDMA IQproducer software is software used to generate waveform patterns conforming to the 3GPP TD-SCDMA specifications.
조작 메뉴얼
pdf 1.7 MB
Version: 7
2026/06/24
This describes basic operations and functions of the TDMA IQproducer.
조작 메뉴얼
pdf 2.7 MB
Version: 15
2026/06/24
The MG3710A is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment.
The MG3710A has the following features, and one MG3710A can address from the current major mobile communications to the next-generation mobile communications.
조작 메뉴얼
pdf 1.9 MB
Version: 6
2026/06/24
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
팜플렛
pdf 5.9 MB
2026/04/28
Anritsu Electronic Measuring Instruments Catalog Condensed Version
카탈로그
pdf 6.1 MB
Version: 2025
2026/01/14
Automatic measurement can be performed by using this instrument in
connection with an external controller (PC). This instrument is
standardly equipped with GPIB, Ethernet, and USB interfaces. You can
also select a remote control command from the SCPI mode, which is a
command format defined by the SCPI Consortium, and Native mode,
which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal
Analyzer Operation Manual (Mainframe Remote Control) for how to
switch the language mode.
You can use the Native mode by converting SCPI commands into Native
ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A
Signal Analyzer Operation Manual (Mainframe Remote Control) for
details.
To use the Signal Analyzer function on the MS2830A or MS2840A,
Analysis Bandwidth 10 MHz Option or greater is required.
조작 메뉴얼
pdf 3.0 MB
Version: 38
2025/07/30
The phase noise measurement function is provided for measuring phase
noise, which is an important factor for evaluating the short-term stability of
signals. With this application, the MS2690A/MS2691A/MS2692A, MS2830A
, MS2840A or MS2850A can be used in various applications, including design
verification, troubleshooting, and testing on production lines.
조작 메뉴얼
pdf 2.9 MB
Version: 14
2025/07/30
This application can be controlled from an external controller (PC) by remote control commands using the MS2690/MS2691/MS2692A,
MS2830A, MS2840A or MS2850A Signal Analyzer(hereinafter, referred to as “this instrument”). The remote control commands are defined by the SCPI format.
조작 메뉴얼
pdf 881.2 KB
Version: 12
2025/07/30
Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standard equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode.
You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for details.
조작 메뉴얼
pdf 4.4 MB
Version: 60
2025/07/30
Introduces Anritsu 5G solutions and products.
Anritsu will contribute to customer's 5G product development and future innovation of network.
팜플렛
pdf 2.9 MB
2025/07/30
This guide includes the basic operation and characteristics of Spectrum and Signal Analyzers as well as their common applications and measurement examples. P/N: 11410-00796
application note
pdf 3.8 MB
Version: B
2023/09/11
This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer. Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.
조작 메뉴얼
pdf 2.6 MB
Version: 3
2023/08/30
