The Near-Field Probe set (p/n: 2000-2149-R) includes three magnetic (H) field and
two electric (E) field probes designed for use in the resolution of emission problems, over a
broad range of frequencies from below 100 kHz to above 1 GHz. The set also includes a 20 cm
extension handle and comes in a custom carrying case. P/N: 10580-00347
유저 가이드
pdf 2.7 MB
Version: D
2025/12/05
This Measurement Guide is for the VNA Master B and C series Vector Network Analyzers. The MS2026B and MS2028B VNA Master needs to have Firmware Version 2.0 and higher. Also covers the LMR Master in VNA mode. P/N: 10580-00289
측정 가이드
pdf 22.8 MB
Version: N
2024/09/18
This SCPI Programming Manual provides information for remote operation of the MS20xxC
Vector Network Analyzer (MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00306
프로그래밍 메뉴얼
pdf 3.9 MB
Version: L
2024/05/13
This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the
equipment. P/N: 10100-00065
Datasheet
pdf 1.4 MB
Version: F
2022/10/24
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00030 | OHS | F | 06/15/2020
online help 시스템
html 185.8 KB
Version: F
2020/06/15
The VNA Master User Guide is part of a set of manuals that cover all of the instrument
functions and their use. This manual covers the instrument overview, system functions, and
other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00305
유저 가이드
pdf 11.0 MB
Version: N
2020/04/28
This Measurement Guide describes the test and measurement functions of Anritsu RF and
Microwave Handheld Instruments. Basic spectrum analyzer functions are included with most
Anritsu handheld instruments. P/N: 10580-00349
측정 가이드
pdf 21.8 MB
Version: P
2020/04/28
This document provides instructions for mounting Anritsu handheld instruments in
to the Anritsu Rack Mount Accessory, part number 66864. P/N:10580-00338
인스톨 가이드
pdf 3.5 MB
Version: C
2020/02/07
This Measurement Guide documents the Power Meter and the High Accuracy Power Meter for the following Anritsu instruments: BTS Master, Site Master, Spectrum Master, and Cell Master. P/N: 10580-00240
측정 가이드
pdf 2.7 MB
Version: J
2020/01/16
This quick start guide provides a brief overview of the installation and use of the 70774 Instrument Test Software with the following Anritsu handheld analyzers:
VNA Master Models: MS2024B, MS2025B, MS2034B, MS2035B, MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, MS2038C, and LMR Master S412E.
퀵 스타트 가이드
pdf 815.7 KB
Version: C
2018/05/08
This guide provides general information, configuration and operation instructions for the 2000-1752-R wireless travel router. P/N: 10580-00432
인스톨 가이드
pdf 1.2 MB
Version: D
2017/09/24
This manual provides service and maintenance information for the Anritsu MS2026C, MS2027C, MS2028C,
MS2036C, MS2037C, and MS2038C models of the handheld VNA Master.
보수 메뉴얼
pdf 23.3 MB
Version: F
2017/08/30
The High Performance VNA Master Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00037
Datasheet
pdf 25.2 KB
Version: A
2017/06/09
This quick start guide provides a brief overview of the installation and use of the 2300-533-R System Verification Software and the SC7858 and SC7859 Verification Kits with handheld VNA Masters.p>
퀵 스타트 가이드
pdf 1.1 MB
Version: C
2013/07/16
Utilize Anritsu handheld Site Master, Cell Master, and BTS Master for Cable and Antenna Measurements. P/N: 11410-00473
서비스 가이드
pdf 2.0 MB
Version: B
2013/03/12
