Comprehensive test and evaluation solutions for every layer of AI data centers, supporting semiconductors through networks from R&D to mass production.
제품의 소개
pdf 5.4 MB
2026/10/08
This explains the MP1900A series specifications.
Datasheet
pdf 3.7 MB
2026/09/11
Data center and network traffic volumes are increasing exponentially as mobile networks start upgrading to 5G and ‘Big Data’ applications become popular. As a consequence, physical-layer devices are required to support faster transmission speeds, larger data capacities, and assured signal quality, in turn making signal integrity analysis ever more important. To meet these needs, Anritsu has implemented more accurate signal integrity tests, such as bit error rate (BER) measurements, crosstalk tests, Jitter Tolerance tests, etc., in its MP1900A test solution for 32G/64G NRZ/PAM4.
팜플렛
pdf 4.0 MB
2026/09/09
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, 32G/64G PAM4 PPG, 32G PAM4 ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
팜플렛
pdf 4.0 MB
2026/09/09
The Signal Quality Analyzer-R MP1900A is a modular design offering optional functions for easy customization to users’ requirements. As a result, the configuration can be tailored to budget timing while the excellent expandability offers easy addition of new future functions. This Selection Guide explains the modules and options, as well as their selection conditions and possible combinations. Please use it to check the best configuration meeting the measurement needs.
선택 가이드
pdf 4.8 MB
2026/09/09
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
제품의 소개
pdf 7.4 MB
2026/09/09
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
리플렛
pdf 507.3 KB
2026/09/09
Overview of data center interconnect technologies, from coherent pluggable optics and IP-over-DWDM to 800G, 1.6T, and advanced optical fibers.
리플렛
pdf 337.3 KB
2026/09/08
MU191000A/MU195020A/MU195040A/MU195050A/MU196020A/MU196020C/MU196040A/
MU196040B/MU196050B/MU196060A Operation Manual.
조작 메뉴얼
pdf 6.4 MB
Version: 24
2026/08/19
This document is the Operation manual of the software that controls the Signal Quality Analyzer Series.
조작 메뉴얼
pdf 17.0 MB
Version: 23
2026/08/19
English MX183000A Operation Manual.
조작 메뉴얼
pdf 15.0 MB
Version: 31
2026/08/19
In addition to the PCIe 1.0 to PCIe 6.0 receiver tests that it has supported as a certified tester, the Signal Quality Analyzer-R MP1900A provides presets and compliance patterns required for PCIe 7.0 Base Specification tests. It automates stress signal calibration and jitter tolerance tests, helping to reduce the design validation time.
리플렛
pdf 175.5 KB
2026/06/03
The MU181500B Jitter Modulation Source is a plug-in module for the
Signal Quality Analyzer series.
조작 메뉴얼
pdf 4.4 MB
Version: 25
2026/06/03
To solve verification challenges and other use cases, the Signal Quality Analyzer-R MP1900A has a
Sequence Editor function for the MU195020A 21G/32G bit/s SI PPG, featuring an intuitive and easy-to-use
custom pattern and sequence creation interface targeted at PCIe 1 to 5 and USB3.2 applications. Using this
Sequence Editor with the MU195040A 21G/32G bit/s SI ED HSSB Data detection function supports fast and
convenient data analysis.
리플렛
pdf 430.0 KB
2026/06/03
This document introduces three types of tests required for Co-Packaged Optics (CPO): electrical signals for Switch ASICs, optical signals for optical engines, and Ethernet signals for CPO Switches.
application note
pdf 935.5 KB
2026/05/20
Introducing Anritsu's measurement solutions for high-speed digital interfaces, optical transceivers, and transport networks.
제품의 소개
pdf 3.7 MB
2026/05/18
This document introduces a variety of Anritsu NTN test solutions for key use cases, after explaining the market and technical trends of NTN.
리플렛
pdf 4.9 MB
2026/05/12
Anritsu Electronic Measuring Instruments Catalog Condensed Version
카탈로그
pdf 6.1 MB
Version: 2025
2026/01/14
On December 24, 2025, the beta version of the software became available for download through the My Anritsu service. This announcement is intended to request that you complete the registration in preparation for using the beta version.
리플렛
pdf 229.5 KB
2025/12/24
This leaflet introduces testing solutions to enhance the efficiency of AI semiconductor R&D.
리플렛
pdf 1.5 MB
2025/09/26
