This simple solution from Anritsu, uses the Network Master to accurately measure the Up-Link and Down-Link Latencies, simultaneously, with time between two testers synchronised by GPS.
Leaflet
pdf 3.7 MB
19/05/2023
MT1000A/MT1000A/MT1040A remote operation manual.
Operations Manual
pdf 4.8 MB
Version: 11.0
08/05/2023
This is the operation manual of the MT1000A Transport.
Operations Manual
pdf 29.8 MB
Version: 28.0
08/05/2023
This is the operation manual of the MT1000A OTDR.
Operations Manual
pdf 10.8 MB
Version: 24.0
08/05/2023
With the spread of sensing and cellular communications technologies, agricultural and construction businesses are increasingly using Information Communications Technology (ICT) due to expectations for better safety, productivity, and quality. In these circumstances, testing and assuring communications quality are critical to guaranteeing precise remote control of agricultural/construction machinery even when video quality is degraded by communications latency and data loss. This leaflet introduces on-site communications quality evaluation and Service Level Agreement (SLA) benchtop testing.
Leaflet
pdf 235.6 KB
17/04/2023
Introduces Anritsu 5G solutions and products.
Anritsu will contribute to customer's 5G product development and future innovation of network.
Brochure
pdf 3.0 MB
12/04/2023
5G/Local 5G features high reliability and low latency in comparison to conventional LTE (4G), and different applications using these features are being considered.
Evaluation of 5G/Local 5G network performance uses the PC iPerf and Ping applications for simple evaluation cases.
This material explains compares evaluation results using iPerf and Ping with results from the Network Master Pro MT1000A to clarify the differences.
Application Note
pdf 1.6 MB
05/04/2023
This Solution Brochure showcases Optical Measuring Instruments, Transport and Ethernet Testing, Mobile Wiress Communication Measuring Instruments, Signal Analyzers, Spectrum Analyzers, VNAs, and RF Microwave products.
Brochure
pdf 3.0 MB
29/03/2023
Recent increase in the construction of new data centers require the demand of work and training optimization from communications infrastructure operators and data center operators than ever.
This case study introduces that using an automated test scenario makes 400ZR optical network deployment more efficient and cuts engineer training costs.
Articles
pdf 2.1 MB
29/03/2023
PTP evaluation can be performed based on the SMPTE2059-2 broadcast profile using the Network Master Pro MT1000A.
Leaflet
pdf 296.7 KB
29/03/2023
Anritsu Electronic Measuring Instruments Catalog of Condensed Version
Catalog
pdf 2.4 MB
Version: 2022
23/03/2023
In the scenario to automate testing of the Layer 2 control protocols (L2CP), Network Master Pro MT1000A/MT1040A generates L2CP traffic with various Layer 2 protocols in carrier Ethernet network, measures the frame loss, and displays as easy-to-understand color-coded Pass/Fail icons.
Application Note
pdf 2.1 MB
25/01/2023
Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617
Brochure
pdf 1.8 MB
Version: H
22/12/2022
The Optical-Transceiver Quick Check scenario is used for diagnosing standalone optical transceivers, such as the QSFP-DD, QSFP28, SFP28, etc., using the MT1000A/MT1040A. The key measurement items: Bit error measurements using optical-fiber loopback, Read-out and confirmation of status of optical transceiver internal registers, and, Measurement of FEC correction margin (400G only).
Application Note
pdf 652.0 KB
13/12/2022
The use of scenarios, that automates bit error rate (BER) testing, are expected to facilitate efficient testing in WDM networks using the Network Master Pro MT1000A/MT1040A. The BER testing scenarios are applied to Ethernet, SDH/SONET, OTN, and Fibre Channel standards.
Application Note
pdf 1.0 MB
13/12/2022
The MU100020A/MU100021A/MU100022A are OTDR modules for the MT1000A Network Master Pro platform, which
incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition,
simultaneous installment of the 10G/100G Multirate Module MU100010A/MU100011A supports OTDR/CPRI measurements
in strong demand by the mobile fronthaul market.
Brochure
pdf 4.0 MB
12/10/2022
The Network Master Pro MT1000A is an all-in-one handy measuring instrument with various integrated functions for finding faults in optical fibers and for quality analysis of data carried over Ethernet, OTN, CPRI, etc., networks.
The MT1000A is configured as a combination of various measurement modules. It is designed to support a combination of selected measurement modules and options with the main unit.
Configuration Guides
pdf 3.1 MB
12/10/2022
The Network Master Pro MT1000A with optical-fiber event detection is an all-in-one multifunctional handy tester for data quality analysis of Ethernet, OTN, CPRI, etc., networks. With clearly visible 9-inch touch-panel, compact on-site portability in one hand, and easy operation, it has all the functions needed for network installation and maintenance while being convenient to manage and use.
Brochure
pdf 5.3 MB
12/10/2022
The introduction of transport module that can be mounted on MT1000A.
The MU100010A and MU100011A provide functions and performance at speeds from 1.5 Mbps to 10 Gbps, and from 10 Mbps to 100 Gbps, respectively, for installing and maintaining communications networks.
Brochure
pdf 6.7 MB
12/10/2022
The all-in-one Network Master Pro MT1000A is for earlier Ethernet network technologies with speeds up to 100G. Combination with the 10G Multirate Module MU100010A option supports all functions, performance and tests needed for installation and maintenance (I&M) of communication networks with speeds ranging from 1.5 Mbps to 10 Gbps. The 100G Multirate Module MU100011A option supports up to 100 Gbps.
Datasheet
pdf 1.6 MB
12/10/2022
