Skip to main content

Download Center

Search by product Model Number

By Document Type

Network Master Pro MT1040A

The Network Master Pro MT1040A is an all-in-one portable 400G measuring instrument with various integrated functions for finding faults in optical circuit and device including Ethernet, OTN, CPRI, etc., networks. The MT1040A is configured as a combination of various measurement modules. It is designed to support a combination of selected measurement modules and options with the main unit.

Configuration Guides pdf 3.4 MB 19/01/2022

MX371054A Interference Waveform Pattern for LTE Receiver Test Operation Manual

MX371054A Interference Waveform Pattern for LTE Receiver Test (hereafter “this waveform pattern”) contains interference waveform pattern conforming to the 3GPP TS36.521-1 V16.7.0 (2020-12). Installing this waveform pattern to the MG3710A/MG3710E Vector Signal Generator (hereafter MG3710A/MG3710E) supports generation of interference waveform pattern signals used at LTE UE for receiver tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A/MG3710E using the pattern. When using this pattern on multiple MG3710A/MG3710E units, a license must be purchased for each MG3710A/MG3710E unit using this pattern.

Operations Manual pdf 567.4 KB Version: 1 17/01/2022

MX371055A Interference Waveform Pattern for 5G NR Receiver Test Operation Manual

MX371055A Interference Waveform Pattern for 5G NR Receiver Test (hereafter “this waveform pattern”) contains interference waveform pattern conforming to the 3GPP TS38.521-1 V17.0.0 (2021-03). Installing this waveform pattern to the MG3710A/MG3710E Vector Signal Generator (hereafter MG3710A/MG3710E) supports generation of interference waveform pattern signals used at 5G NR UE of Sub-6 GHz band for receiver tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A/MG3710E using the pattern. When using this pattern on multiple MG3710A/MG3710E units, a license must be purchased for each MG3710A/MG3710E unit using this pattern.

Operations Manual pdf 581.4 KB Version: 1 17/01/2022

MS27201A Remote Spectrum Monitors Quick Fact Sheet

Quick overview of the key specifications, features, and options that the MS27201A Remote Spectrum Monitors offer. P/N: 11410-02879

Brochure pdf 847.7 KB Version: A 11/01/2022

MS27201A Remote Spectrum Monitors Product Brochure

The MS27201A remote spectrum monitors are designed to facilitate wide area spectrum monitoring up to 43.5 GHz. The MS27201A series remote spectrum monitors are our highest frequency spectrum monitors covering all standard LMR, cellular, satellite, and defense electronic bands.

Brochure pdf 3.8 MB Version: A 11/01/2022

MS27201A Remote Spectrum Monitors Programming Manual

This manual provides SCPI programming information and a list of SCPI programming commands for the Anritsu MS27201A remote spectrum monitors.

Programming Manual pdf 1.8 MB Version: A 11/01/2022

MS27201A Remote Spectrum Monitors Maintenance Manual

This manual provides maintenance instructions for Anritsu remote spectrum monitor models MS27201A.

Maintenance Manual pdf 2.5 MB Version: A 11/01/2022

MS27201A Remote Spectrum Monitors Technical Data Sheet

The Anritsu MS27201A remote spectrum monitors provide high-performance real-time monitoring of the radio spectrum up to 43.5 GHz. Designed to be stable over time under continuous operation, the MS27201A provides superior sweep speeds, high dynamic range, and low spurious levels for fast and accurate measurements. Applications include monitoring for interference, white space analysis, unlicensed transmission discovery, and signal coverage.

Datasheet pdf 2.6 MB Version: A 11/01/2022

MS2710xA Remote Spectrum Monitors Product Information, Compliance, and Safety

This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu MS2710xA series remote spectrum monitors. P/N: 10100-00064

Datasheet pdf 1.3 MB Version: H 11/01/2022

MS27201A Remote Spectrum Monitors User Guide

This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups for the Anritsu MS27201A remote spectrum monitor.

User Guide pdf 18.1 MB Version: A 11/01/2022

Field Master Pro MS2090A Quick Fact Sheet

Quick overview of the key specifications, features, and options that the Field Master Pro offers. P/N: 11410-01104

Brochure pdf 402.0 KB Version: P 10/01/2022

Network Master Pro MT1000A - 10G/100G Multirate Module MU100010A / MU100011A

The introduction of transport module that can be mounted on MT1000A. The MU100010A and MU100011A provide functions and performance at speeds from 1.5 Mbps to 10 Gbps, and from 10 Mbps to 100 Gbps, respectively, for installing and maintaining communications networks.

Brochure pdf 6.7 MB 07/01/2022

Network Master Pro MT1000A

The Network Master Pro MT1000A with optical-fiber event detection is an all-in-one multifunctional handy tester for data quality analysis of Ethernet, OTN, CPRI, etc., networks. With clearly visible 9-inch touch-panel, compact on-site portability in one hand, and easy operation, it has all the functions needed for network installation and maintenance while being convenient to manage and use.

Brochure pdf 5.3 MB 07/01/2022

Network Master Pro OTDR Module MU100020A / MU100021A / MU100022A / MU100023A

The MU100020A/MU100021A/MU100022A are OTDR modules for the MT1000A Network Master Pro platform, which incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition, simultaneous installment of the 10G/100G Multirate Module MU100010A/MU100011A supports OTDR/CPRI measurements in strong demand by the mobile fronthaul market.

Brochure pdf 4.0 MB 07/01/2022

Network Master Pro MT1000A - 10G/100G Multirate Module MU100010A / MU100011A

The all-in-one Network Master Pro MT1000A is for earlier Ethernet network technologies with speeds up to 100G. Combination with the 10G Multirate Module MU100010A option supports all functions, performance and tests needed for installation and maintenance (I&M) of communication networks with speeds ranging from 1.5 Mbps to 10 Gbps. The 100G Multirate Module MU100011A option supports up to 100 Gbps.

Datasheet pdf 1.9 MB 07/01/2022

Network Master Pro MT1000A

The Network Master Pro MT1000A is an all-in-one handy measuring instrument with various integrated functions for finding faults in optical fibers and for quality analysis of data carried over Ethernet, OTN, CPRI, etc., networks. The MT1000A is configured as a combination of various measurement modules. It is designed to support a combination of selected measurement modules and options with the main unit.

Configuration Guides pdf 3.1 MB 07/01/2022

Network Master Pro MT1040A

The portable MT1040A tester supports 400G Ethernet. This Data Sheet describes the MT1040A hardware specifications, including 400G Ethernet, as well as details of functions.

Datasheet pdf 1.8 MB 07/01/2022

Network Master Pro MT1040A

The all-in-one portable MT1040A tester for 400G Ethernet also supports up to 100G Ethernet and OTN networks. Installing the OTDR module enables optical-fiber continuity tests as well. This Catalog describes typical MT1040A use cases as well as ordering information.

Brochure pdf 4.7 MB 07/01/2022

Radio Communication Test Station MT8000A

Radio Communication Test Station MT8000A supports both 5G NR RF measurements and protocol tests in sub-6 GHz and millimeter wave bands with the base station emulation function. Moreover, it supports not only 5G SA (Standalone) but also NSA (non-Standalone) mode with the customer's existing LTE measurement assets.

Brochure pdf 3.8 MB 05/01/2022

Radio Communication Test Station MT8000A

Radio Communication Test Station MT8000A supports both 5G NR RF measurements and protocol tests in sub-6 GHz and millimeter wave bands. With the RF Chamber MA8171A, the MT8000A provides integrated OTA environment for beamforming test, etc.

Product Introduction pdf 3.6 MB 05/01/2022

By Document Type

Field Master Pro Instrument Software

This firmware contains the latest updates and features for your instrument. Download the file to a USB storage device, plug the device into the instrument, and update the software from the system information page.

Drivers, Software Downloads raucb 409.0 MB Version: V2021.11.2 13/01/2022

Field Master Pro PC Software

Remote user interface for the MS2090A. Connect to any MS2090A on the network by entering the IP address. Download and install on any PC using Windows 7, 8.1, or 10.

Drivers, Software Downloads exe 112.1 MB Version: 2021.11.2 13/01/2022

Release History for the Field Master Pro Software

Release history for the Field Master Pro software which works with Field Master Pro MS2090A.

Drivers, Software Downloads pdf 179.5 KB Version: 2021.11.2 13/01/2022

Field Master Pro MS2090A FOSS Disclosures and Licenses

Disclosures for use of free and open source software.

Drivers, Software Downloads zip 7.9 MB Version: 11-2021 13/01/2022

Anritsu-GRL TBT3 Rx Test Application Release Note

English Anritsu-GRL TBT3 Rx Test Application Release Note.

Drivers, Software Downloads pdf 120.7 KB Version: 6 11/01/2022

PCIe 5.0 CEM Rx Test Application Release Note

English Anritsu-GRL PCIe 5.0 CEM Rx Test Application Release Note.

Drivers, Software Downloads pdf 343.7 KB Version: 12 11/01/2022

PCIe 5.0 BASE Rx Test Application Release Note

English Anritsu-GRL PCIe 5.0 BASE Rx Test Application Release Note.

Drivers, Software Downloads pdf 393.9 KB Version: 8 11/01/2022

PCIe 4.0 CEM Rx Test Application Release Note

English Anritsu-GRL PCIe 4.0 CEM Rx Test Application Release Note.

Drivers, Software Downloads pdf 1.3 MB Version: 14 11/01/2022

PCIe 4.0 BASE Rx Test Application Release Note

English Anritsu-GRL PCIe 4.0 BASE Rx Test Application Release Note.

Drivers, Software Downloads pdf 1,003.1 KB Version: 8 11/01/2022

PCIe 3.0 BASE Rx Test Application Release Note

English Anritsu-GRL PCIe 3.0 BASE Rx Test Application Release Note.

Drivers, Software Downloads pdf 569.0 KB Version: 10 11/01/2022

PCIe 3.0 CEM Rx Test Application Release Note

English Anritsu-GRL PCIe 3.0 CEM Rx Test Application Release Note.

Drivers, Software Downloads pdf 1.1 MB Version: 14 11/01/2022

Anritsu-GRL USB 3.2 Rx Test Application Release Note

English Anritsu-GRL USB3.1 Rx Test Application Release Note.

Drivers, Software Downloads pdf 448.4 KB Version: 10 11/01/2022

Anritsu-GRL USB4 Rx Test Application Release Note

English Anritsu-GRL USB4 Rx Test Application Release Note.

Drivers, Software Downloads pdf 134.1 KB Version: 5 11/01/2022

Anritsu-GRL SAS3 Rx Test Application Release Note

English Anritsu-GRL SAS3 Rx Test Application Release Note.

Drivers, Software Downloads pdf 115.0 KB Version: 2 11/01/2022

Anritsu-GRL SAS4 Rx Test Application Release Note

English Anritsu-GRL SAS4 Rx Test Application Release Note.

Drivers, Software Downloads pdf 106.0 KB Version: 2 11/01/2022

Anritsu-GRL DP1.4 Sink Test Application Release Note

English Anritsu-GRL DP1.4 Sink Test Application Release Note.

Drivers, Software Downloads pdf 138.6 KB Version: 6 11/01/2022

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46131A, and MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

Drivers, Software Downloads exe 239.1 MB Version: v2021.5.2 21/12/2021

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

Drivers, Software Downloads pdf 363.3 KB Version: v2021.5.2 21/12/2021

MT1100A_Software

Software of MT1100A.

MD5 : 4c9059ce480de5f5300f2699352bc31d

Drivers, Software Downloads zip 762.1 MB Version: 12.04 20/12/2021

MX100001A windows control software

MX100001A windows control software.


MD5 : 3103b3e7fd7551e89deea347c942b242

Drivers, Software Downloads zip 78.6 MB Version: 12.04 20/12/2021

By Product Category

No Records Found in Download Center
Confirm your country below to see local events, contact information and special offers.