With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
Brochure
pdf 2.9 MB
Version: D
11/09/2023
The purpose of this application note is to detail the procedure for creating off-line maps. While there are several open source options for tile map construction, this application note will be using Map Puzzle to detail the method for incorporating these maps into the Anritsu software application. P/N: 11410-01132
Application Note
pdf 2.5 MB
Version: B
11/09/2023
A quick overview of the 9 kHz to 6 GHz Remote Spectrum Monitor for remote RF signal monitoring. Includes features, key specifications, and available options. Small form factor designed for remote applications. P/N: 11410-01084
Brochure
pdf 699.7 KB
Version: D
01/08/2023
Download the complete user guide for the MS2710xA family of Remote Spectrum Monitors. Chapters include Graphical User Interface, How to, and Programming with SCPI. P/N: 10580-00419
User Guide
pdf 9.1 MB
Version: P
18/07/2023
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00052 | OHS | version P | 07/18/2023
Online Help System
html 184.9 KB
Version: P
18/07/2023
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu MS2710xA series remote spectrum monitors. P/N: 10100-00064
Datasheet
pdf 1.3 MB
Version: J
07/07/2023
This Technical data sheet includes the GPS, Yagi, Horn, Mag Mount, Wideband, Log Periodic, Whip, Bi-Blade, and Loop antennas. P/N: 11410-00376
Datasheet
pdf 3.3 MB
Version: Y
14/06/2023
The purpose of an in-building wireless system is to provide enhanced network coverage
and or capacity when the existing macro network is not able to adequately service the
demand. Coverage may be poor due to high penetration losses caused by the building
structure or due to low emissivity glass installed to improve the thermal performance of the building. P/N: 11410-00885
Application Note
pdf 6.8 MB
Version: D
13/06/2023
This Solution Brochure showcases Optical Measuring Instruments, Transport and Ethernet Testing, Mobile Wiress Communication Measuring Instruments, Signal Analyzers, Spectrum Analyzers, VNAs, and RF Microwave products.
Brochure
pdf 3.0 MB
29/03/2023
Anritsu Electronic Measuring Instruments Catalog of Condensed Version
Catalog
pdf 2.4 MB
Version: 2022
23/03/2023
The MX280005A vector signal analysis (VSA) software supports all common digital wireless modulation standards. Fast and accurate measurements make it ideal for R&D as well as early rollout of digital radio equipment and components. P/N: 11410-02844
Brochure
pdf 17.9 MB
Version: D
31/01/2023
The Vector Signal Analysis software is intended for testing physical layer modulation quality of various transmission standards. P/N: 10580-00475
User Guide
pdf 37.6 MB
Version: D
24/01/2023
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00068 | OHS | version D | 01/24/2023
Online Help System
html 184.9 KB
Version: D
24/01/2023
Spectrum monitoring systems facilitate the identification and removal of interference signals that degrade network capacity. By monitoring spectrum on a continual basis, problem signals can be identified as they occur
in real-time. Patterns of unwanted signal activity can also be examined, providing an efficient way to characterize and locate the source of the interference problem. P/N: 11410-00876
Brochure
pdf 9.4 MB
Version: L
05/10/2022
The MS27101A monitor provides superior sweep speeds, high dynamic range, and low spurious levels for fast and accurate measurements. Applications include monitoring for interference, white space analysis, unlicensed transmission discovery, and signal coverage. P/N: 11410-00853
Datasheet
pdf 2.1 MB
Version: T
05/10/2022
Vision works with the monitoring hardware to automate the process of collecting measurement data, providing useful information about network heath and use of the spectrum. Vision Monitor automatically records spectrum data, maintains a searchable spectrum history database, enables alarm functions for unusual signal activity and provides a set of tools for managing the spectrum monitoring system. Vision Locate provides the capability to geo-locate interference or illegal, unlicensed signals. P/N: 10580-00418
User Guide
pdf 32.0 MB
Version: N
05/10/2022
The MS27101A-IBCM In-Building Coverage Mapper Bundle enables technicians to verify proper signal field strength across multiple frequencies in a single walk-through. P/N: 11410-01187
Brochure
pdf 1.8 MB
Version: B
26/07/2022
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235
Catalog
pdf 13.3 MB
Version: AD
26/07/2022
This documentation provides a description of the Anritsu’s Remote Spectrum Monitor and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. P/N: 10580-00435
Programming Manual
pdf 3.3 MB
Version: D
19/07/2022
Time Difference of Arrival is a technique for geo-locating RF sources. It requires three or more remote receivers capable of detecting the signal of interest. P/N: 11410-01009
Application Note
pdf 2.6 MB
Version: D
28/06/2022
