Introduces Anritsu Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.
This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.
Brochure
pdf 1.8 MB
01/09/2023
Anritsu’s 100G/lane test solution is configured using the Signal Quality Analyzer-R MP1900A sampling
oscilloscope and BERTWave MP2110A bit error tester. This solution supports TDECQ measurement in accordance
with the 400GbE-VR4 and SR4 850 nm multimode standards to facilitate efficient development and production of
optical devices.
Leaflet
pdf 377.0 KB
26/07/2023
To cut power consumption by data centers and computers, electrical wiring is being replaced by optical lines and interconnects using Photonics-Electronics convergence devices and Co-Packaged Optics (CPO) technologies.
Optical interconnects are expected to have applications in many fields, including optical transceivers in data centers, on-board communications, and high-performance computing (HPC).
Anritsu’s measurement solution for testing the CPO and its optical engine combines the company’s Bit Error Rate Tester MP1900A and Sampling Oscilloscope MP2110A.
Leaflet
pdf 214.6 KB
14/06/2023
Introduces Anritsu 5G solutions and products.
Anritsu will contribute to customer's 5G product development and future innovation of network.
Brochure
pdf 3.0 MB
12/04/2023
Anritsu Electronic Measuring Instruments Catalog of Condensed Version
Catalog
pdf 2.4 MB
Version: 2022
23/03/2023
Co-Packaged Optics (CPO) is a technology that mounts electronic devices such as Switch ASICs and optical devices on the same board. The CPO aims to achieve higher bandwidth while reducing power consumption and cooling costs.
This document introduces three types of tests required for CPOs: electrical signals for Switch ASICs, optical signals for optical engines, and Ethernet signals for CPO Switches.
Application Note
pdf 846.9 KB
27/02/2023
BERTWave Series Remote Control Operation Manual
Operations Manual
pdf 4.0 MB
Version: 22th Edition
11/07/2022
MP2110A BERTWave Operation Manual
Operations Manual
pdf 15.8 MB
Version: 25th Edition
11/07/2022
Installing this option makes it easy to configure a versatile production line for testing both SMF and MMF
optical transceivers using Anritsu’s powerful all-in-one MP2110A.
Leaflet
pdf 296.4 KB
08/06/2022
Optical transceivers required by Large-scale networks, such as 100/400 GbE, are securing bandwidth using multichannel parallel processing. Consequently, all-at-once multichannel measurement is extremely effective for improving productivity. The BERTWave MP2110A featuring fast measurement speeds and high sensitivity not only assures high efficiency but also improves productivity by addition of the Quad Optical Scope option to halve measurement costs per channel compared to previous instruments.
Leaflet
pdf 371.2 KB
08/06/2022
With a built-in BERT (for Bit Error Rate measurements) and a sampling oscilloscope (for Eye pattern analysis) the All-in-one BERTWave MP2110A is optimized for manufacturing 100 GbE and 25 GbE optical modules.
The BERTWave MP2110A will improve optical module production efficiency and reduce manufacturing costs.
Brochure
pdf 4.5 MB
13/05/2022
Devices using the PAM4 signal require BER evaluation and waveform quality evaluation. Anritsu provides measurement solutions such as TOSA, Driver IC Evaluations, Optical Module and Active Cable Evaluations.
Leaflet
pdf 1.5 MB
02/03/2022
The CRU option can be installed in the sampling oscilloscope of the BERTWave MP2110A. This leaflet introduces the features of this option.
Leaflet
pdf 369.9 KB
17/02/2022
This application note introduces measurement solutions for testing the performance and compatibility of high-speed optical transceivers from R&D to Validation, Production, Installation and Maintenance.
Application Note
pdf 2.3 MB
15/09/2021
Anritsu’s MP2110A is being used by many makers as a sampling oscilloscope for manufacturing optical modules meeting
market trends and customers’ needs. With its standards-compliant support for PAM4 measurement of electrical interfaces,
it is the ideal solution for evaluating electrical interfaces to improve interconnectivity between modules and equipment.
Leaflet
pdf 355.6 KB
21/07/2021
This leaflet outlines Co-Packaged Optics (CPO) and introduces Anritsu’s solution.
Leaflet
pdf 614.3 KB
26/05/2021
400-GbE tests (simultaneous measurement of 4 lanes) can be implemented using one MP2110A unit, while 800-GbE tests (simultaneous measurement of 8 lanes) require two units; the MT2110A built-in Clock Recovery triggerless measurement environment improves evaluation efficiency and manufacturing productivity.
Leaflet
pdf 527.8 KB
30/06/2020
Measuring instruments with embedded Windows (such as the MP1900A, MP2110A, MS9740B) can be controlled remotely from a
customer's home PC by connecting to the customer's in-company network using the Windows Remote Desktop function. This is useful if the customer cannot operate the instrument directly at the office.
Leaflet
pdf 274.6 KB
25/05/2020
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
White Paper
pdf 608.5 KB
26/12/2019
PAM4 analysis (option) can be performed by the sampling oscilloscope of the BERTWave MP2110A. This leaflet introduces the features of this option.
Leaflet
pdf 687.9 KB
30/08/2018
