Skip to main content

Download Center

Search by product Model Number

By Document Type

New Radio RF Conformance Test System ME7873NR

The New Radio RF Conformance Test System ME7873NR is a RF Conformance Test (RFCT) platform for RF transmitter / receiver characteristics, performance requirements, and RRM testing of 5G mobile devices compliant with 3GPP standards. Based on the solid and trusted achievements selected and used by customers around the world in the 3G (W-CDMA) and 4G (LTE) era, we will continue to release timely test cases for 5G.

Brochure pdf 2.4 MB 30/11/2020

Signal Quality Analyzer-R MP1900A - PCIe/USB/Thunderbolt Test Solutions

Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, 32G/64G PAM4 PPG, 32G PAM4 ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.

Brochure pdf 5.4 MB 24/11/2020

Field Master Pro MS2090A Product Brochure

The Field Master Pro MS2090A device delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer. P/N: 11410-01103

Brochure pdf 13.3 MB Version: M 11/11/2020

Field Master Pro MS2090A Quick Fact Sheet

Quick overview of the key specifications, features, and options that the Field Master Pro offers. P/N: 11410-01104

Brochure pdf 831.3 KB Version: K 11/11/2020

RF and Microwave Signal Generator MG3690C Product Brochure

The RF and Microwave signal generator series MG3690C covers the audio, HF, VHF, UHF, RF, and microwave frequencies and provides coverage from 0.1 Hz to 70 GHz with a single coaxial output (up to 500 GHz with external multipliers). With excellent phase noise, fast switching speeds, and a full suite of analog modulation capabilities (including high-performance pulse modulation), the MG3690C series is an optimal signal source solution for the design and testing of components and systems for a wide variety of industries. P/N: 11410-01119

Brochure pdf 1.9 MB Version: B 03/11/2020

Network Master Pro MT1040A

The all-in-one portable MT1040A tester for 400G Ethernet also supports up to 100G Ethernet and OTN networks. Installing the OTDR module enables optical-fiber continuity tests as well. This Catalog describes typical MT1040A use cases as well as ordering information.

Brochure pdf 4.4 MB 02/11/2020

OTA Product Catalog - Shield Box MA8161A / RF Chamber MA8171A / CATR Anechoic Chamber MA8172A

5G NR uses the sub-6GHz and mmWave bands, and 3GPP recommends using over-the-air (OTA) call connections to test the mmWave band, requiring an OTA RF chamber for stable measurement. Anritsu's OTA products support this wide frequency band with easy setup for shorter test times.

Brochure pdf 2.1 MB 28/10/2020

Signal Quality Analyzer-R MP1900A - 32G/64G NRZ/PAM4 Signal Integrity Test Solution

Data center and network traffic volumes are increasing exponentially as mobile networks start upgrading to 5G and ‘Big Data’ applications become popular. As a consequence, physical-layer devices are required to support faster transmission speeds, larger data capacities, and assured signal quality, in turn making signal integrity analysis ever more important. To meet these needs, Anritsu has implemented more accurate signal integrity tests, such as bit error rate (BER) measurements, crosstalk tests, Jitter Tolerance tests, etc., in its MP1900A test solution for 32G/64G NRZ/PAM4.

Brochure pdf 5.5 MB 27/10/2020

Optical Spectrum Analyzer MS9740B

The Optical Spectrum Analyzer MS9740B is an all-in-one optical spectrum analyzer for SM and MM fiber. The MS9740B reduces the total time from waveform sweeping to data transfer to external control equipment and supports simple analysis procedures, offering excellent cost performance and better productivity.

Brochure pdf 7.0 MB 12/10/2020

Network Installation and Maintenance Testing Instruments

Introduces Anritsu Network Installation and Maintenance Testing Instruments products. This Solution Brochure is a document for Optical Measuring Instruments, Transport and Ethernet Testing, Mobile Wiress Communication Measuring Instruments, Signal Analyzers/Spectrum Analyzers, VNA, RF Micro products.

Brochure pdf 1.3 MB 08/10/2020

mmWave Coaxial Components W1 (1.0 mm) Components up to 110 GHz Quick Fact Sheet

This two page quick fact sheet covers the key specifications and W1 component highlights to help you make the right choice for your solution needs. P/N: 11410-02830

Brochure pdf 653.7 KB Version: B 22/09/2020

ShockLine ME7868A Modular 2-Port Vector Network Analyzer System Quick Fact Sheet

The ShockLine ME7868A system is offered in 8 GHz, 20 GHz, and 43.5 GHz frequencies and requires cabling between the two ShockLine MS46131A VNAs to support the PhaseLync option. PN: 11410-01200

Brochure pdf 706.1 KB Version: B 11/09/2020

Signal Analyzer MS2850A

This is the product brochure for Signal Analyzer MS2850A and the related products. (MS2850A and options, 5G/LTE/W-CDMA/GSM Measurement Software, etc.) MS2850A has the analysis bandwidth and excellent flatness performance needed for development and production of next-generation broadband communications systems such as 5G in an all-in-one middle-price-range spectrum analyzer/signal analyzer platform.

Brochure pdf 4.5 MB 02/09/2020

Signal Analyzer MS2840A-040/041 (3.6 GHz/6.0 GHz model)

Signal Analyzer MS2840A-040/041 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 3.6 GHz/6 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, dedicated options for MS2840A-040/041 greatly enhance their performance to exceed that of other makers’ high-grade models (–133 dBc/Hz at measurement frequency of 500 MHz and offset frequency of 10 kHz). The standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software, analog measurement software, vector/analog signal generator options support evaluation of various digital and analog wireless equipment/devices and also adds functions for measuring amplifier noise figure (NF) values.

Brochure pdf 5.2 MB 02/09/2020

Signal Analyzer MS2830A

The MS2830A is a high-speed, high-performance, cost-effective Spectrum Analyzer/Signal Analyzer. Not only can it capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains.

Brochure pdf 4.8 MB 02/09/2020

Signal Analyzer MS2830A-044/045

The Signal Analyzer MS2830A-044/045 includes a spectrum analyzer function with upper frequency limits of 26.5 GHz and 43 GHz. Combining it with the External Mixer MA2740C/MA2750C series supports measurements up to 325 GHz. Additionally, the excellent dynamic range and wide measurement span required for measuring wireless backhaul and automotive radar are supported by the High Performance Waveguide Mixer MA2808A (60 to 90 GHz). It supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counts, as well as spurious measurements.

Brochure pdf 5.4 MB 02/09/2020

Vector Signal Generator MG3710E

The MG3710E is a vector signal generator with 6 GHz upper frequency limit and 120 MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, Bluetooth and GPS.

Brochure pdf 5.6 MB 02/09/2020

Signal Analyzer MS2840A-044/046 (26.5 GHz/44.5 GHz model)

Signal Analyzer MS2840A-044/046 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 26.5 GHz/44.5 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models* and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, the standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software and analog measurement software options support evaluation of various digital and analog wireless modulation signals and also adds functions for measuring amplifier noise figure (NF) values. Further, connecting the separately sold High Performance Waveguide Mixer enables spectrum measurements between 50 and 90 GHz for wideband wireless equipment, radar, etc.

Brochure pdf 3.5 MB 02/09/2020

Analog Signal Generator MG3740A

The MG3740A Analog Signal Generator has excellent RF specifications, including SSB Phase Noise, output level, etc., and versatile modulation functions (AM/FM/ΦM/Pulse).

Brochure pdf 2.1 MB 02/09/2020

Site Master S331L Product Brochure

The Site Master S331L is a one-port, 2 MHz to 4 GHz hand held cable and antenna analyzer designed to make Return Loss, VSWR, Cable Loss, Distance-To-Fault (DTF), and power measurements in the field. P/N: 11410-00640

Brochure pdf 12.4 MB Version: K 01/09/2020

By Document Type

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46131A, and MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

Drivers, Software Downloads exe 237.4 MB Version: v2020.10.1 01/12/2020

IVI-C Installation Files

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

Drivers, Software Downloads exe 100.2 MB Version: v2020.10.1 01/12/2020

Release Note for IVI-C Driver

Release history for the IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

Drivers, Software Downloads pdf 327.5 KB Version: v2020.10.1 01/12/2020

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

Drivers, Software Downloads pdf 319.1 KB Version: v2020.10.1 01/12/2020

MX9085_Firmware_v111_E

Firmware and documents for MT9085A/B/C are contained in the zip file.

MD5 : e336f1a2f8b20417bd6ba607199b73ef

Drivers, Software Downloads zip 38.3 MB Version: v1.11 19/11/2020

uOTDR_Firmware_v304_E

Firmware and documents for MU909014A/A1/B/B1/15B/B1 are contained in the zip file.

MD5 : b908ad4ae1604ecd4b10e9dae5cd6554

Drivers, Software Downloads zip 19.2 MB Version: 3.04 19/11/2020

uOTDR_Rev2_Firmware_v304_E

Firmware and documents for MU909014C/C6/15A6/C/C6 are contained in the zip file. This program falls under the regulation of EAR. The ENC license exception is applicable.

MD5 : 3dff9ffd2eff4d2ae2a227e4aca3763a

Drivers, Software Downloads zip 19.3 MB Version: 3.04 19/11/2020

Vector Modulation Analysis Software MX280005A

The MX280005A Vector Modulation Analysis Software supports all common digital wireless modulation standards. Fast, accurate measurements make it ideal for R&D and early rollout of digital radio equipment and components. MX280005A covers a wide range of applications, from public safety (PMR/LMR) to aerospace and defense plus satellite communications.

Drivers, Software Downloads msi 21.2 MB Version: V2020.11.2 18/11/2020

Release History for the MX280005A Software

Release history for the Vector Modulation Analysis Software MX280005A.

Drivers, Software Downloads pdf 5.6 KB Version: V2020.11.2 18/11/2020

PCIe 5.0 CEM Rx Test Application Release Note

English Anritsu-GRL PCIe 5.0 CEM Rx Test Application Release Note.

Drivers, Software Downloads pdf 315.9 KB Version: 5 10/11/2020

PCIe 5.0 BASE Rx Test Application Release Note

English Anritsu-GRL PCIe 5.0 BASE Rx Test Application Release Note.

Drivers, Software Downloads pdf 385.7 KB Version: 6 10/11/2020

PCIe 4.0 CEM Rx Test Application Release Note

English Anritsu-GRL PCIe 4.0 CEM Rx Test Application Release Note.

Drivers, Software Downloads pdf 1.2 MB Version: 9 10/11/2020

PCIe 4.0 BASE Rx Test Application Release Note

English Anritsu-GRL PCIe 4.0 BASE Rx Test Application Release Note.

Drivers, Software Downloads pdf 931.9 KB Version: 7 10/11/2020

PCIe 3.0 BASE Rx Test Application Release Note

English Anritsu-GRL PCIe 3.0 BASE Rx Test Application Release Note.

Drivers, Software Downloads pdf 515.3 KB Version: 6 10/11/2020

PCIe 3.0 CEM Rx Test Application Release Note

English Anritsu-GRL PCIe 3.0 CEM Rx Test Application Release Note.

Drivers, Software Downloads pdf 940.8 KB Version: 8 10/11/2020

Anritsu-GRL USB4 Rx Test Application Release Note

English Anritsu-GRL USB4 Rx Test Application Release Note.

Drivers, Software Downloads pdf 98.4 KB Version: 2 10/11/2020

Field Master Pro Instrument Software

This firmware contains the latest updates and features for your instrument. Download the file to a USB storage device, plug the device into the instrument, and update the software from the system information page.

Drivers, Software Downloads raucb 319.3 MB Version: V2020.10.1 09/11/2020

Field Master Pro PC Software

Remote user interface for the MS2090A. Connect to any MS2090A on the network by entering the IP address. Download and install on any PC using Windows 7, 8.1, or 10.

Drivers, Software Downloads exe 89.9 MB Version: 2020.10.1 09/11/2020

Release History for the Field Master Pro Software

Release history for the Field Master Pro software which works with Field Master Pro MS2090A.

Drivers, Software Downloads pdf 155.7 KB Version: 2020.10.1 09/11/2020

Field Master Pro MS2090A Foss Disclosures and Licenses

Disclosures for use of free and open source software.

Drivers, Software Downloads zip 9.0 MB 09/11/2020

By Product Category

Confirm your country below to see local events, contact information and special offers.