| Frequency Range: |
30 MHz to 2700 MHz |
| Max. Input Level: |
+35 dBm (Main 1) |
| RF Signal Generator: |
Frequency
Frequency range: 30 MHz to 2700 MHz (setting range: 400 kHz to 2700 MHz)
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
Setting resolution: 1 Hz |
Output level
Level range: −140 to −10 dBm (Main 1), −130 to 0 dBm (AUX 1)
Resolution: 0.1 dB
Accuracy: Main: ±1.0 dB, ±0.7 dB typ. (Output frequency ≥50 MHz),
±1.5 dB (Output frequency <50 MHz)
*−120 to −10 dBm, after calibration, 10º to 40ºC
Aux: ±1.0 dB, ±0.7 dB typ. (Output frequency ≥50 MHz),
±1.5 dB (Output frequency <50 MHz)
*−120 to −0 dBm, after calibration, 10º to 40ºC
|
Sequence Measurement:
(Software: MX882020C)
|
Frequency range: 400 MHz to 2700 MHz
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
|
Amplitude measurement
Input level: −70 to +35 dBm (Main)
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−20 to +35 dBm), ±0.7 dB (−50 to −20 dBm),
±0.9 dB (−60 to −50 dBm)
For measurement bandwidth of ≤5 MHz,
±0.3 dB (typ.), ±0.5 dB (−25 to +35 dBm), ±0.7 dB (−55 to −25 dBm),
±0.9 dB (−65 to −55 dBm)
For measurement bandwidth of ≤2 MHz,
±0.9 dB (−70 to −55 dBm)
*400 MHz to 2700 MHz, after calibration, 10º to 40ºC
±0.3 dB (typ.), ±0.5 dB (−20 to +35 dBm) (18º to 28ºC),
±0.7 dB (−50 to +35 dBm), ±0.9 dB (−60 to −50 dBm)
For measurement bandwidth of ≤5 MHz,
±0.3 dB (typ.), ±0.5 dB (−25 to +35 dBm), ±0.7 dB (−55 to +35 dBm),
±0.9 dB (−65 to −55 dBm)
For measurement bandwidth of ≤2 MHz,
±0.9 dB (−70 to −55 dBm)
*3400 MHz to 3800 MHz, after calibration, 10º to 40ºC
Linearity: ±0.2 dB (−40 to 0 dB, ≥−50 dBm), ±0.4 dB (−40 to 0 dBm, ≥−60 dBm)
For measurement bandwidth of ≤5 MHz,
±0.2 dB (−40 to 0 dB, ≥−55 dBm), ±0.4 dB (−40 to 0 dBm, ≥−65 dBm)
*400 MHz to 2700 MHz, after calibration, 10º to 40ºC
±0.2 dB (−40 to 0 dB, ≥−50 dBm, 18º to 28ºC),
±0.3 dB (−40 to 0 dB, ≥−50 dBm),
±0.4 dB (−40 to 0 dBm, ≥−60 dBm),
For measurement bandwidth of ≤5 MHz,
±0.2 dB (−40 to 0 dB, ≥−55 dBm, 18º to 28ºC),
±0.3 dB (−40 to 0 dB, ≥−55 dBm),
±0.4 dB (−40 to 0 dBm, ≥−65 dBm),
*3400 MHz to 3800 MHz, after calibration, 10º to 40ºC
Relative measurement error: Range <2 dB,
typ. ±0.10 dB (−40 to 0 dB, ≥−50 dBm)
|
LTE FDD Measurement:
(Hardware: Option 008
Software: MX882012C)/
LTE TDD Measurement:
(Hardware: Option 008
Software: MX882013C)
|
Frequency range: 400 MHz to 2700 MHz
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
|
Amplitude measurement
Input level: −60 to +35 dBm (Main)
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−20 to +35 dBm), ±0.7 dB (−50 to −20 dBm),
±0.9 dB (−60 to −50 dBm)
*400 MHz to 2700 MHz, after calibration, 10º to 40ºC
±0.3 dB (typ.), ±0.5 dB (−20 to +35 dBm) (18º to 28ºC),
±0.7 dB (−50 to −20 dBm), ±0.9 dB (−60 to −50 dBm)
*3400 MHz to 3800 MHz, after calibration, 10º to 40ºC
Linearity: ±0.2 dB (−40 to 0 dB, ≥−50 dBm), ±0.4 dB (−40 to 0 dBm, ≥−60 dBm)
*400 MHz to 2700 MHz, after calibration, 10º to 40ºC
±0.2 dB (−40 to 0 dB, ≥−50 dBm, 18º to 28ºC),
±0.3 dB (−40 to 0 dB, ≥−50 dBm),
±0.4 dB (−40 to 0 dBm, ≥−60 dBm),
*3400 MHz to 3800 MHz, after calibration, 10º to 40ºC
|
Frequency/Modulation measurement
Input level: −40 to +35 dBm (Main)
Carrier frequency accuracy: ±(Setting frequency × Reference oscillator accuracy +15 Hz)
Measurement object: PUSCH, PRACH, PUCCH
|
Call processing
Call controlling: Registration, Call processing for Reference Measurement Channel
(executes each processing conforming to 3GPP standards and performs
pass/fail evaluation)
Mobile terminal controlling: Output level
(executes each mobile terminal control conforming to 3GPP standards) |
LTE FDD Measurement:
(Software: MX882042C) /
LTE TDD Measurement:
(Software: MX882043C) |
Frequency range: 400 MHz to 2700 MHz
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
|
Amplitude measurement
Input level: −60 to +35 dBm (Main)
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−20 to +35 dBm), ±0.7 dB (−50 to −20 dBm),
±0.9 dB (−60 to −50 dBm)
*400 MHz to 2700 MHz, after calibration, 10º to 40ºC
±0.3 dB (typ.), ±0.5 dB (−20 to +35 dBm) (18º to 28ºC),
±0.7 dB (−50 to −20 dBm), ±0.9 dB (−60 to −50 dBm)
*3400 MHz to 3800 MHz, after calibration, 10º to 40ºC
Linearity: ±0.2 dB (−40 to 0 dB, ≥−55 dBm), ±0.4 dB (−40 to 0 dBm, ≥−60 dBm)
*400 MHz to 2700 MHz, after calibration, 10º to 40ºC
±0.2 dB (−40 to 0 dB, ≥−50 dBm, 18º to 28ºC),
±0.3 dB (−40 to 0 dB, ≥−50 dBm),
±0.4 dB (−40 to 0 dBm, ≥−60 dBm),
*3400 MHz to 3800 MHz, after calibration, 10º to 40ºC
|
Frequency/Modulation measurement
Input level: −40 to +35 dBm (Main)
Carrier frequency accuracy: ±(Setting frequency × Reference oscillator accuracy +15 Hz)
Measurement object: PUSCH |
W-CDMA Measurement:
(Hardware: Option 001
Software: MX882000C,
MX88205xC) |
Frequency range: 300 MHz to 2700 MHz |
Modulation analysis
Input level: −30 to +35 dBm (Main)
Modulation accuracy: ≤2.5% (at input of single DPCCH and single DPDCH) |
RF power
Input level: −65 to +35 dBm (Main)
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−25 to +35 dBm), ±0.7 dB (−55 to −25 dBm),
±0.9 dB (−65 to −55 dBm)
*after calibration, 10º to 40ºC
Measurement object: DPCH, PRACH |
Occupied bandwidth
Input level: −10 to +35 dBm (Main) |
Adjustment channel leakage power ratio
Input level: −10 to +35 dBm (Main)
Measurement point: ±5 MHz, ±10 MHz |
Error rate measurement
Functions: Insert PN9 or PN15 pattern in DTCH
Measurement items: BER, BLER |
Call processing
Call controlling: Registration, Origination, Termination, Handover, Network disconnect,
Terminal disconnect (executes each processing conforming to 3GPP standards
and performs Pass/Fail evaluation)
Mobile terminal controlling: Output level, Loopback
(executes each mobile terminal control conforming to 3GPP standards) |
GSM/GPRS Measurement:
(Hardware: Option 002
Software: MX882001C) |
Frequency range: 300 MHz to 2700 MHz |
Frequency/Modulation measurement
Input level: −30 to +40 dBm (Average power of burst signal, Main)
Measurement items: Normal burst, RACH |
Amplitude measurement
Input level: −30 to +40 dBm (Average power of burst signal, Main)
Measurement items: Normal burst, RACH
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−20 to +40 dBm), ±0.7 dB (−30 to −20 dBm),
*after calibration, 10º to 40ºC
Linearity: ±0.2 dB (0 to −40 dB, ≥−30 dBm) |
Error rate measurement
Functions: frame, bit and CRC error measurement
Measurement object:
GSM
Loopback data imposed on uplink TCH
Serial data input from rear panel call processing I/O port
GPRS
Number of blocks received from terminal imposed on uplink TCH for GPRS |
Call processing
Call controlling:
GSM (Location registration, Origination, Termination, Network disconnect,
Terminal disconnect)
GPRS (Connection, Disconnection, Data transfer)
Terminal controlling:
GSM (Output level, Time slot, Timing advance, Loopback on/off)
GPRS (Test Mode A, Test Mode B, BLER) |
CDMA2000 1X Measurement:
(Hardware: Option 003,
Software: MX882002C) |
Frequency range: 300 MHz to 2700 MHz |
Amplitude measurement
Input level: −65 to +35 dBm (Main)
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−25 to +35 dBm), ±0.7 dB (−55 to −25 dBm),
±0.9 dB (−65 to −55 dBm)
*after calibration, 10º to 40ºC
Linearity: ±0.2 dB (0 to −40 dB, ≥−55 dBm), ±0.4 dB (0 to −40 dB, ≥−65 dBm)
|
Frequency/Modulation measurement
Input level: −30 to +35 dBm (Main)
Carrier frequency accuracy: ±(Setting frequency × Reference oscillator accuracy +10 Hz)
Residual waveform quality: >0.999 |
Error rate measurement
FER (Frame Error Rate) measurement: FER measurement with service option 2, 9, 55
and 32 (TDSO)
Display items: Confidence level, FER, Error frame count, Sample frame count
|
Call processing
Band Class: BC 0 to 12, 14, 15, 18, 19, 20
Call controlling: Location registration, Origination, Termination, Network disconnect,
Terminal disconnect
Paging channel data rate: Full
Radio Configuration: F-RC1 + R-RC1, F-RC2 + R-RC2, F-RC3 + R-RC3, F-RC4 + R-RC3,
F-RC5 + R-RC4
Supported protocols: IS-95B, J-STD-008C, ARIB T-53, Korean PCS, IS-2000 (SR1)
|
CDMA2000 1xEV-DO
Measurement:
(Hardware: Option 005,
Software: MX882006C) |
Frequency range: 300 MHz to 2700 MHz |
Frequency/Modulation measurement
Input level: −30 to +35 dBm
Carrier frequency accuracy: ±(Setting frequency × Reference oscillator accuracy +10 Hz)
Residual waveform quality: >0.999
Residual EVM: <2% rms |
Code domain power
Input level: −30 to +35 dBm
Measurement accuracy: ±0.2 dB (code power ≥−15 dBc), ±0.4 dB (code power ≥−23 dBc) |
RF signal generator
Channel level: Pilot channel, MAC channel, Control channel, Traffic channel, All 0 dB
(reference Ior)
PN offset: 0 to 511
Waveform quality: >0.99 (pilot only, AWGN Off)
AWGN: AWGN Level: −20 to +12 dB (relative level to CDMA signal) or Off
Maximum CDMA signal output level at AWGN On: −28 dBm (Main output),
−18 dBm (AUX output) |
Call processing
Band Class: BC 0 to 12, 14, 15, 18, 19, 20
Call control: Open Session, Close Session, AT Origination, NW Origination,
AT Release, NW Release, Hard Handoff, Softer Handoff
Rev.Closed Loop Power Control Mode: Closed Loop, Alternate, All 0 (All up),
All 1 (All down)
Test Application Protocol: RTAP, FTAP, FTAP + RTAP |
TD-SCDMA Measurement:
(Hardware: Option 001, 007
Software: MX882007C) |
Frequency range: 300 MHz to 2700 MHz |
Amplitude measurement
Input level: −70 to +35 dBm (Main)
Measurement accuracy: ±0.3 dB (typ.), ±0.5 dB (−25 to +35 dBm), ±0.7 dB (−55 to −25 dBm),
±0.9 dB (−70 to −55 dBm)
*after calibration, 10º to 40ºC
Linearity: ±0.2 dB (−40 to 0 dB, ≥−55 dBm), ±0.4 dB (−40 to 0 dBm, ≥−65 dBm) |
Frequency/Modulation Measurement
Input level: −30 to +35 dBm (Main)
Carrier frequency accuracy: ±(Setting frequency × Reference oscillator accuracy +10 Hz)
Measurement object: DPCH, UpPCH |
Error rate measurement
Functions: Insert PN9 or PN15 pattern in DTCH
Measurement items: BER, BLER |
Call processing
Origination controlling: Registration, Origination, Termination, Network disconnect,
Terminal disconnect (executes each processing conforming to 3GPP standards
and performs Pass/Fail evaluation)
Mobile terminal controlling: Output level, Loopback (executes each mobile terminal control
conforming to 3GPP standards) |
ProductsMobile Wireless Communications
