64G bit/s Signal Integrity solution

Ready for 400G?

			Measuring 56 Gbit/s Band High-Speed Semiconductor Chips AOC/Backplane Device Stress Jitter Tolerance Test
			Evaluating 400GbE Transmitters PAM4 64Gbaud, 128Gbit/s Signal Generation

Watch the 56G/64G bit/s MUX/DEMUX MP1861/62A Video

Linking the MUX MP1861A and DEMUX MP1862A with the MP1800A with installed 32G PPG/ED supports generation of NRZ Data signals at up　to 64.2 Gbit/s and BER measurements. High expandability from 32G to 56/64G BERT supports 100/400G R&D requirements.

Wideband Bit Rate Up to 64.2 Gbit/s

Expand 28G/32G 2ch BERT to 56G/64G

3.5 Vp-p MUX max. Tuning range from 0.5 to 3.5Vpp 25 mV DEMUX Sensitivity

Jitter Tolerance Tests Jitter Bathtub Measurements

Serial NRZ Data can be generated at up to 64.2 Gbit/s and BER and Jitter Tolerance can be measured by combining the MUX MP1861A and DEMUX MP1862A with the MP1800A with installed 32G PPG/ED and Jitter Modulation Source option. The latest standards, such as CEI-56G, are supported by tolerance tests for each jitter component, including SJ, RJ, BUJ, SSC, Dual Tone SJ, Half Period Jitter (Even/Odd Jitter), etc., as well as Bathtub Jitter measurements. With Emphasis and PAM signal generation, an equalizer function for correcting the EYE opening, Jitter Tolerance measurement software and more, Anritsu’s MP1800A is the total solution for signal-integrity evaluations.

Bit-Rate and Channels

• Low Intrinsic Jitter
  RJ = 200 fs rms (typ.)
• Variable Amplitude
  3.5 Vp-p Output max
• High Input Sensitivity
  25 mV (typ., Single-ended, EYE Height, 56.2 Gbit/s)

• TJ/DJ/RJ/Bathtub Jitter, EYE Diagram, EYE Margin Automatic Measurements
• Jitter Tolerance Tests (using MU181500B)
  Supports SJ, EJ, BUJ, SSC, Dual Tone SJ, Half Period Jitter (Even/Odd Jitter)
  Wide-Amplitude SJ Generation: 0.55UI@fm 250 MHz
• Independently Variable Channels
  Crosstalk Test using Data Skew

• Synchronized Multi-channel Pattern Generation (4ch max) and Simultaneous BER Analysis
• Emphasis Signal Generation (using MZ1854A, 56 Gbit/s with MP1861A 2ch Sync)
• PAM4 Signal Generation (using MZ1854A, 43 Gbit/s with MP1861A 2ch Sync)

The Jitter Modulator MU181500B generates wide-amplitude SJ up to 0.55 UI at a Jitter Frequency of 250 MHz and a maximum 2000 UI, ensuring sufficient margin for receiver Jitter Tolerance tests. Additionally, the Intrinsic Jitter of 275 fs rms (nominal)^* is extremely low, not only when Jitter modulation is OFF but also when 0 UI is set at Jitter modulation ON, ensuring accurate measurements even at low Jitter amplitudes. The combination of low intrinsic jitter waveform with excellent jitter transparency supports high-accuracy Jitter Tolerance tests. Moreover, simultaneous injection of RJ, BUJ and SSC as well as dual SJ for two-tone supports various Jitter Tolerance tests. Additionally, the Jitter/Noise Tolerance Test Software MX181500A supports multi-mask tables as well as easy mask editing to support next-generation standards.
*: Phase noise measurement with using Spectrum Analyzer and 1010… repetition signal.

Jitter Modulation Source MU181500B Setting Screen

Jitter/Noise Tolerance Test Software MX181500A Setting Screen

Sinusoidal Jitter (SJ)

Random Jitter (RJ)

Bounded Uncorrelated Jitter (BUJ)

Half Period Jitter (F/2 Jitter)

Supports 64G signal quality evaluations using one MP1800A and MUX/DEMUX