Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617
摺頁冊
pdf 1.8 MB
Version: H
2022/12/22
The µOTDR Module series MU909014x/15x for the MT9090A Network Master platform from Anritsu finally addresses this need by providing all of the features and performance required for installation and maintenance of optical fibers in a compact, modular test set.
摺頁冊
pdf 2.6 MB
2022/11/22
The Ethernet technology is widely deployed and used for numerous applications. Therefore easy testing of Ethernet links is very important. When outfitted with the Gigabit Ethernet module, the very compact battery-powered, easy-to-use Anritsu Network Master is a comprehensive solution for Gigabit Ethernet testing and for installation and troubleshooting Ethernet communication lines. The instrument gives the user facilities for easy bandwidth verification, connectivity testing and service availability verification. The small size and low weight of the instrument makes it very easy to carry around for the field technician working with the Ethernet lines and despite the small size the instrument is equipped with a large display. The user can easily read and interpret information from the tested lines off the large color display with easy-to-understand colors and graphical symbols. And the graphical user interface makes it a simple task to configure and operate the instrument
摺頁冊
pdf 1.9 MB
2022/7/27
Introduces Anritsu Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.
This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.
摺頁冊
pdf 1.9 MB
2022/3/8
The MU909020A is ready for measurement in about 15 seconds, so productive work can start immediately. With no moving parts, the MU909020A is faster than any OSA, providing quick troubleshooting of a CWDM network.
摺頁冊
pdf 2.6 MB
2019/8/1
With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
摺頁冊
pdf 55.2 MB
Version: C
2019/1/9
Transport, Optical & RF Testing for all Elements of the C-RAN Network.
Anritsu has a long history of testing all aspects of the C-RAN. Our instruments evolve to meet the new challenges of testing the C-RAN
networks being rolled out today. Put our experience to work for you!
摺頁冊
pdf 3.2 MB
Version: B
2018/3/29
Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality.
The Video Inspection Probe G0306B can be connected to the Network Master MT1000A/MT1100A Series,
the ACCESS Master MT9083x2 Series, uOTDR MT9090A Series product and PC, to show the state of a ferrule endface.
This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.
產品介紹
pdf 1.7 MB
2016/4/15
Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality.
The Video Inspection Probe G0306B can be connected to the Network Master MT1000A/MT1100A Series,
the ACCESS Master MT9083x2 Series, uOTDR MT9090A Series product and PC, to show the state of a ferrule endface.
This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.
傳單
pdf 1.1 MB
2016/4/15
Product Introduction for μOTDR Module MT9090A/MU909014X/15X
產品介紹
pdf 2.0 MB
2014/12/5
“Fiber Visualizer” is a new fault location function designed to simplify the entire testing process. Fiber Visualizer automatically selects the testing parameters to ensure the correct setup and provides a simple, graphical summary of the fiber under test within seconds. A comprehensive PDF report can then be customized and generated, completing the testing process.
Recent enhancements provide better event detection and accuracy as well as individualized PASS/FAIL analysis to simplify your FTTx/PON testing.
傳單
pdf 385.5 KB
2014/12/5
Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality.
The Video Inspection Probe G0306A can be connected to the Network Master MT1000A/MT1100A Series,
the ACCESS Master MT9083x2 Series, uOTDR MT9090A Series product and PC, to show the state of a ferrule endface.
This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.
產品介紹
pdf 1.4 MB
2014/5/28
Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality.
The OPTION-545VIP can be connected to an MT908x Series ACCESS Master, MT9090A Network Master Series product and PC, to show the state of a ferrule endface.
This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.
產品介紹
pdf 1.5 MB
2014/3/24
“Fiber Visualizer” is a new fault location function designed to simplify the entire testing process. Fiber Visualizer automatically selects the testing parameters to ensure the correct setup and provides a simple, graphical summary of the fiber under test within seconds. A comprehensive PDF report can then be customized and generated, completing the testing process.
傳單
pdf 279.7 KB
2013/10/16
The new MT9090A from Anritsu finally addresses this need by providing all of the features and performance required for installation and maintenance of short fibers in a compact, modular test set.
摺頁冊
pdf 2.5 MB
2013/10/2
Product Introduction for MU909060A1/A2/A3 Gigabit Ethernet Tester
產品介紹
pdf 2.2 MB
2011/6/24
New Features for activating multiple Ethernet Services
傳單
pdf 267.3 KB
2011/6/24
This is discontinued product document.
資料表
pdf 537.6 KB
2011/3/18
Application Note for the MT9090A/MU909060A Network Master GigE - VLAN Stacking or Q-in-Q "Where is it and Why?"
應用說明
771.47 KB
2009/10/23
Application Note for the VLAN Stacking or Q-in-Q (MT9090A/MU909060A Network Master GigE)
應用說明
pdf 766.9 KB
Version: 1.0
2009/7/14
