Skip to main content




Wireless Connectivity Test Set MT8862A

The Wireless Connectivity Test Set MT8862A is for measuring the RF TRx characteristics of WLAN IEEE802.11 a/b/g/n/ac equipment. It uses standard WLAN protocol messaging in the Network Mode to measure test items, such as Tx power, modulation accuracy (EVM), Rx sensitivity (PER) etc., at connection with the device under test (DUT).

摺頁冊 pdf 2.0 MB 2022/12/5

Easy RF Evaluation of WLAN Products

An outline explanation is offered, including MT8862A Tx and Rx evaluation measurement items and screens, as well as simple connection setups using the Web Server function and Network mode.

傳單 pdf 708.0 KB 2022/9/7

Evaluating WLAN Products Receiver Characteristics -Introduction to WLAN Measuring Instruments-

Explains WLAN equipment evaluation example.

傳單 pdf 704.0 KB 2022/9/7

Evaluating WLAN Products Transmitter Characteristics -Introduction to WLAN Measuring Instruments-

For customers developing WLAN equipment (IoT products) The spread and increase of IoT installations is raising the importance of evaluating the communications performance of WLAN devices built into IoT products. This introduces and suggests evaluation examples for WLAN equipment.

傳單 pdf 633.6 KB 2022/9/7

Anritsu Automotive Product Lineup: Test Expertise for the Future of Transportation

This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.

傳單 pdf 5.5 MB 2022/4/25

Wireless Connectivity Test Set MT8862A

The Wireless Connectivity Test Set MT8862A is for measuring the RF TRx characteristics of WLAN IEEE802.11 a/b/g/n/ac equipment. Measure RF performance under actual operating conditions for quality assurance of diverse and complex devices. Ideal for RF measurements at product development and design validation.

產品介紹 pdf 2.6 MB 2022/4/6

Wireless LAN Signal Quality Test - All-in-One Intelligent Signaling and Non-signaling Evaluations

Since both signaling and non-signaling mode test environments are supported, the best test method matching the development status and test conditions can be selected for effective and efficient evaluation. With support for both signaling and non-signaling test modes, Anritsu’s Wireless connectivity Test Set MT8862A can perform evaluations in each mode in the same test environment to easily cancel any effects of different test environments.

傳單 pdf 268.5 KB 2021/12/8

For ETSI EN 301 489-17 Immunity Test - PER Measurement for Wireless LAN Devices

The MT8862A can measure RF TRx characteristics during communications with commercial wireless LAN (WLAN) devices. It has the PER measurement function required by the immunity test and supports fixed or changing Rx power levels.

傳單 pdf 237.6 KB 2021/10/13

IEEE 802.11ax Test Challenge

To support the various requirements of rapidly increasing numbers of WLAN devices, a new IEEE 802.11ax communications standard is being prepared along with provision to support an extended 6-GHz frequency band. With its easy-to-use GUI, the Wireless Connectivity Test Set MT8862A supports signal-quality measurements for this WLAN IEEE 802.11ax standard. Moreover, in addition to displaying results both graphically and numerically, Pass/Fail evaluations can be performed based on freely set reference values.

傳單 pdf 1.6 MB 2021/10/6

Measurement Improves CPE Product Quality

Anritsu offers three products for CPE R&D and QA. These testers have a Signaling Mode to establish call connection by functioning as a base station or access point. The Signaling Mode is effective for evaluating end-device RF performance, such as OTA TRP/TIS, because there is no need to use test firmware or a device control interface.

傳單 pdf 216.0 KB 2020/12/18

New WLAN Applications for EVs Appearance of Wireless Charging - Wireless Charging Requiring Communications Technologies -

The Wireless Connectivity Test Set MT8862A supports IEEE802.11b/a/g/n/ac/ax tests of wireless characteristics; it is a useful instrument for design and quality evaluation of the wireless equipment forming part of wireless recharging systems.

傳單 pdf 673.4 KB 2020/6/24

WLAN Product Evaluation Examples Benchmark Test -Introduction to WLAN Measuring Instruments-

Explains importance of benchmarking (evaluation examples) for WLAN equipment

傳單 pdf 1.4 MB 2020/3/31

Unknowingly Transmitting Abnormal Output? -Tx Power Mode Usage Examples-

For development and manufacturing of WLAN equipment. Sometimes, even products that have passed wireless legal compliance tests have problems. Some examples of troubleshooting and solutions are explained.

傳單 pdf 573.8 KB 2019/8/27

WLAN Devices Issues with Poor Sensitivity USB Noise -Noise problems that cannot be solved simply by clearing EMC regulations-

New electrical devices with built-in WLAN often suffer from connection problems due to various factors. This leaflet describes some typical issues caused by noise from USB and explains effective methods for identifying these issues.

傳單 pdf 1.0 MB 2019/8/21

Evaluation of RF Characteristics using Optimized OTA Measurement by MT8862A - CTIA/WFA CWG V. 2.1 Test Plan Conformance -

Best WLAN Test Solution for CTIA/WFA CWG Test Plan Ver. 2.1.

傳單 pdf 852.5 KB 2019/5/21

Do your WLAN products have poor connection / call drop problems?

Explains precautions for self-poisoning (intra-EMC) with WLAN equipment.

傳單 pdf 1.2 MB 2019/5/21

Receiving WLAN Signal Everywhere in Cabin?

We introduce points for avoiding problems after delivery while presenting reliable quantifiable data on wireless communications characteristics from an actual (wireless) environment.

傳單 pdf 410.4 KB 2017/12/19


Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

驅動程式/軟體下載 2021/7/14