This Solution Brochure showcases Optical Measuring Instruments, Transport and Ethernet Testing, Mobile Wiress Communication Measuring Instruments, Signal Analyzers, Spectrum Analyzers, VNAs, and RF Microwave products.
摺頁冊
pdf 3.0 MB
2023/3/29
Recent increase in the construction of new data centers require the demand of work and training optimization from communications infrastructure operators and data center operators than ever.
This case study introduces that using an automated test scenario makes 400ZR optical network deployment more efficient and cuts engineer training costs.
文章
pdf 2.1 MB
2023/3/29
PTP evaluation can be performed based on the SMPTE2059-2 broadcast profile using the Network Master Pro MT1000A.
傳單
pdf 296.7 KB
2023/3/29
In the scenario to automate testing of the Layer 2 control protocols (L2CP), Network Master Pro MT1000A/MT1040A generates L2CP traffic with various Layer 2 protocols in carrier Ethernet network, measures the frame loss, and displays as easy-to-understand color-coded Pass/Fail icons.
應用說明
pdf 2.1 MB
2023/1/25
Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617
摺頁冊
pdf 1.8 MB
Version: H
2022/12/22
The Optical-Transceiver Quick Check scenario is used for diagnosing standalone optical transceivers, such as the QSFP-DD, QSFP28, SFP28, etc., using the MT1000A/MT1040A. The key measurement items: Bit error measurements using optical-fiber loopback, Read-out and confirmation of status of optical transceiver internal registers, and, Measurement of FEC correction margin (400G only).
應用說明
pdf 652.0 KB
2022/12/13
The use of scenarios, that automates bit error rate (BER) testing, are expected to facilitate efficient testing in WDM networks using the Network Master Pro MT1000A/MT1040A. The BER testing scenarios are applied to Ethernet, SDH/SONET, OTN, and Fibre Channel standards.
應用說明
pdf 1.0 MB
2022/12/13
MT1000A/MT1000A/MT1040A remote operation manual.
作業手冊
pdf 4.7 MB
Version: 10.0
2022/12/8
This is the operation manual of the MT1000A Transport.
作業手冊
pdf 29.5 MB
Version: 27.0
2022/12/8
This is the operation manual of the MT1000A OTDR.
作業手冊
pdf 10.6 MB
Version: 23.0
2022/12/8
The MU100020A/MU100021A/MU100022A are OTDR modules for the MT1000A Network Master Pro platform, which
incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition,
simultaneous installment of the 10G/100G Multirate Module MU100010A/MU100011A supports OTDR/CPRI measurements
in strong demand by the mobile fronthaul market.
摺頁冊
pdf 4.0 MB
2022/10/12
The Network Master Pro MT1000A is an all-in-one handy measuring instrument with various integrated functions for finding faults in optical fibers and for quality analysis of data carried over Ethernet, OTN, CPRI, etc., networks.
The MT1000A is configured as a combination of various measurement modules. It is designed to support a combination of selected measurement modules and options with the main unit.
設定指南
pdf 3.1 MB
2022/10/12
The Network Master Pro MT1000A with optical-fiber event detection is an all-in-one multifunctional handy tester for data quality analysis of Ethernet, OTN, CPRI, etc., networks. With clearly visible 9-inch touch-panel, compact on-site portability in one hand, and easy operation, it has all the functions needed for network installation and maintenance while being convenient to manage and use.
摺頁冊
pdf 5.3 MB
2022/10/12
The introduction of transport module that can be mounted on MT1000A.
The MU100010A and MU100011A provide functions and performance at speeds from 1.5 Mbps to 10 Gbps, and from 10 Mbps to 100 Gbps, respectively, for installing and maintaining communications networks.
摺頁冊
pdf 6.7 MB
2022/10/12
The all-in-one Network Master Pro MT1000A is for earlier Ethernet network technologies with speeds up to 100G. Combination with the 10G Multirate Module MU100010A option supports all functions, performance and tests needed for installation and maintenance (I&M) of communication networks with speeds ranging from 1.5 Mbps to 10 Gbps. The 100G Multirate Module MU100011A option supports up to 100 Gbps.
資料表
pdf 1.6 MB
2022/10/12
This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.
傳單
pdf 5.5 MB
2022/4/25
Introduces Anritsu Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.
This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.
摺頁冊
pdf 1.9 MB
2022/3/8
Cross-border communications are expanding with construction of edge-computing sites and data centers. Securing the quality of submarine network cables, which facilitate high-capacity, high-speed and low-latency communications, is becoming more important. Submarine networks are being upgraded and
many new landing stations are also being built to meet these requirements.
This leaflet describes tests solutions for Submarine-Cable I&M.
傳單
pdf 175.3 KB
2022/3/8
Open source licences
作業手冊
zip 333.4 KB
Version: 04
2022/2/22
This is manual of MX100003A MT1000A/MT1100A/MT1040A Scenario Edit Environment Kit.
作業手冊
pdf 3.6 MB
Version: 4.0
2022/2/22
