Anritsu offers a comprehensive range of power meters. The ML2490A series has the performance required for narrow fast rising-edge pulse power measurements (e.g., radar). The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. With seven different families of power sensors, including USB sensors to choose from, you can trust you'll find the right combination for precision power measurement, whatever your application. P/N: 11410-00408
摺頁冊
pdf 2.3 MB
Version: J
2023/6/13
Anritsu Electronic Measuring Instruments Catalog of Condensed Version
目錄
pdf 2.4 MB
Version: 2022
2023/3/23
Download this solution card for an overview of the Power Sensors and Meters available from Anritsu. P/N: 11410-00558
傳單
pdf 1.0 MB
Version: F
2021/2/18
This manual provides general information, performance verification, calibration, theory, and service information for the Anritsu ML2437A and ML2438A Power Meters. P/N: 10585-00003
維護手冊
pdf 10.5 MB
Version: J
2021/2/10
This manual provides descriptions and specifications for Anritsu Power Sensors that are used in conjunction with Anritsu power meters. It includes care, handling and performance verification information. P/N: 10585-00004
作業手冊
pdf 1,021.2 KB
Version: V
2020/11/3
This manual provides installation and operational information for the ML2437A and
ML2438A Power Meters. P/N: 10585-00001
作業手冊
pdf 3.1 MB
Version: T
2020/10/9
The ML2490A series has the performance required for narrow, fast rising-edge pulse power measurements (for example, radar), while the ML2480B series is suited for wideband power measurements on signals such as W-CDMA, WiMAX, LTE, and WLAN. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. P/N: 11410-00423
資料表
pdf 2.0 MB
Version: M
2020/10/9
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu Power Meters, Power Master™, USB Power Sensors, Thermal Sensors, and Diode Sensors. Be sure to
read these important notices before operating the equipment. P/N: 10100-00066
資料表
pdf 1.3 MB
Version: C
2019/9/27
Offering a comprehensive range of power meters. The ML2490A series has the performance required for narrow fast rising-edge pulse power measurements such as radar. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed, and flexibility in a low cost package. P/N: 11410-00652
摺頁冊
pdf 268.3 KB
Version: D
2019/4/2
This user guide provides instructions on how to install firmware updates on the ML2400 Series Power Meters using the Anritsu Bootloader Software Utility.
Requirements
Anritsu bootloader software utility
Bootloader cable (Anritsu part number B41323 – a 9 pin female to 9 pin female RS-232 cable, with TX & RX swapped, CTS & RTS swapped, and DTR & DSR swapped)
Anritsu ML2400 series power meter (ML2437A, ML2438A, ML2487A/B, ML2488A/B, ML2495A, or ML2496A)
The associated new firmware files
Intel-based PC with a Pentium or equivalent processor and the Microsoft® Windows® 2000, Windows XP, or the Windows 7 operating system (32- or 64-bit)
Note
Both the Anritsu Bootloader software utility and power meter firmware can be downloaded from www.anritsu.com. These files will be under the Library tab on the associated product page under the Drivers, Software Downloads heading.
使用者手冊
pdf 984.6 KB
Version: A
2014/8/7
This manual provides installation, operation, and maintenance information for the Anritsu Model ML2419A Range Calibrator.
作業手冊
pdf 5.6 MB
Version: B
2014/4/2
The Rack Mount Kit MT8852B can be ordered with rack mounting hardware that allows it to be mounted into a standard 48 cm equipment rack. P/N: 10585-00025
安裝指南
pdf 1.4 MB
Version: A
2012/9/19
維護手冊
xls 72.5 KB
Version: C
2011/5/24
The aim of this guide is to familiarise you with the basic features and capabilities of the Anritsu ML2400A Series Power Meter by the use of working examples.
快速參考指南
pdf 1.5 MB
Version: C
2000/3/17
