遠端頻譜監控器

• 9 kHz ~ 6 GHz
• 掃描速度高達 24 GHz/s
• 整合式網路伺服器，可透過網路瀏覽器檢視、控制並執行測量
• 硬體監視定時器可確保遠端部署的監控器長期穩定
• 低雜散位準，可準確探索訊號
• 20 MHz 瞬時 FFT 頻寬

PC based IQ analysis software for use with IQ data captured from a Remote Spectrum Analyzer

IQ Signal Master MX280005A Vector Signal Analysis Software provides a comprehensive suite of measurements that deliver post processing and analysis of IQ data files captured on the Remote Spectrum Analyzers. The software is designed to bring together all the essential tools required to capture IQ data files and then gain critical insights into the nature of the captured signals. Modes within the application, support the ability to capture or stream IQ data into the PC memory, perform modulation quality measurements and playback IQ data with high frequency and time resolution.

A file conversion mode allows IQ data captured on the supported analyzers to be converted to the format required for playback using a Vector Signal Generator MG3710E further enhancing the overall capability.

The software is designed for national RF spectrum regulators, security agencies and defense electronics companies who need to gain critical insight into RF signals that have been captured in the field. It is also suitable for organizations that need to monitor and protect RF spectrum from unlicensed operators or unintended sources of interference

IQ Signal Master MX280005A Vector Signal Analysis Software

使用乙太網連接至遠端頻譜監控器

透過儀器上的千兆乙太網連接埠與 MS27101A 完成通訊。可選擇使用 DHCP 取得動態 IP 位址，亦可以設定靜態 IP 位址。此儀器出廠時的靜態 IP 位址預設為 10.0.0.2。當透過筆記型電腦/個人電腦連接至該儀器後，可透過使用者介面在監控器整合式網路伺服器中更改 IP 類型。

若使用 DHCP，Anritsu 將提供乙太網偵測程式，可在您的網路中查詢所有已連接的裝置。此乙太網偵測程式可在 Anritsu 網站上取得。

某些顧客可能需要使用網域名稱伺服器 (DNS)，使頻譜監控器的主機名稱可以解析至其動態 IP 位址。可使用 DNS 伺服器建立主機名稱。例如，可以建立「mymonitor1.org」或「spectrum1.net」等主機名稱。有多種免費 DNS 服務可供使用。Anritsu 亦使用此類服務，例如 www.no-ip.com。您需要建立一個帳戶，並為您的儀器選擇一個主機名稱。

若要進一步瞭解如何配置您的乙太網連接，請檢視我們的乙太網配置快速入門指南 (Configuration Quick Start Guide)，此指南可在「資料庫」標籤中下載。