Skip to main content
MA24507A Power Master

Power Master™ 頻率可選 mmWave 電源分析儀

Power Master is a frequency selectable mmWave power analyzer that measures the RF power of signals and is powered by USB, in a small form factor

The Power Master is an ultra-portable, USB-based mmWave power analyzer that provides simple, numeric and frequency selective average power RF measurements. The Power Master features two frequency coverage options between 9 kHz to 70 GHz and 9 kHz to 110 GHz. The Power Master provides very broadband power range coverage with a floor as low as -90 dBm.

Many customers are challenged with finding an affordable power sensor that provides broadband frequency and power level coverage as well as a small foot print. The Power Master was created to minimize cost to the customer by removing expensive and unwarranted features that can drive the price of a standard mmWave sensor. The design of the Power Master was to mitigate long measurement times that can be experienced with other mmWave sensor products that are based on thermal components. The Power uses a receiver-based architecture that can not only reduce measurement time, but also allows for frequency-selectivity which provides a more accurate power measurement in the desired frequency band. For foot print, the Power Master is nearly the size of a smart phone, freeing up workbench space.

The Power Master is an all-purpose and robust mmWave power sensor that can used for stand-alone measurements or in a system for calibrating Vector Network Analyzers.

  • 低電源電容,以測量低至 –90 dBm
  • 的訊號
  • 常適合進行空中測試,特別是 mmWave 訊號傳播損失較高的時候
  • 使用者設定以控制測量速度和噪音底層
  • PowerXpert 的新頻道監控模式,一次可監控多達六個頻率頻道
  • PowerXpert 的新電源捕取模式,可在頻率範圍內搜尋多達六個訊號
  • 直接安裝以連接探針來進行晶圓上測試的安裝孔

To utilize the powerful capabilities of Power Master, there several features to PowerXpert.

Support for Power Master general settings:

  • Measurement mode
  • Center frequency
  • Span
  • Resolution

Power Hunter mode: user defines a frequency range within which Power Master will identify the six highest CW amplitudes and their corresponding frequency

Channel Monitor mode: allows users to select up to six frequency channels (up to 20 MHz wide) and monitor their CW amplitude or channel power simultaneously

To download PowerXpert, visit the Downloads button on this page.

型號 MA24507A MA24510A
頻率範圍 9 kHz — 70 GHz 9 kHz — 110 GHz
測量範圍 -90 — +10 dBm -90 — +10 dBm
SWR (x:1)

9 kHz — ≤ 12.4 GHz 1.29

> 12.4 GHz — 50 GHz 1.67

> 50 GHz — 70 GHz 2.10

9 kHz — ≤ 12.4 GHz 1.29

> 12.4 GHz — 50 GHz 1.67

> 50 GHz — 110 GHz 2.10

Amplitude 精度 (db,Typical) ±1.0 dB, typical ±1.0 dB, typical
射頻接頭 V(m) 接頭 W(m) 接頭