This is the data sheet for Signal Analyzer MS2850A and the related products.
技术指标
pdf 1.5 MB
2022/6/8
This Configuration Guide explains how to order the new MS2850A and MS2850A retrofit options and measurement software.
配置指南
pdf 596.9 KB
2022/6/8
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
产品手册
pdf 5.9 MB
2022/5/18
This is a leaflet about MT8000A/MT8821C, signal analyzer and signal generator used for 5G/LTE User Equipment RF evaluation.
传单
pdf 358.3 KB
2022/1/21
Introduces Anritsu 5G solutions and products.
Anritsu will contribute to customer's 5G product development and future innovation of network.
产品手册
pdf 3.0 MB
2021/11/30
Introducing Anritsu’s test solutions for O-RAN fronthaul (O-FH) equipment which is configured as an O-DU (O-RAN Distributed Unit) and O-RU (O-RAN Radio Unit) with a lower functional “Split 7-2x”.
传单
pdf 336.6 KB
2021/6/2
The MS2850A Signal Analyzer (“the MS2850A” hereafter) is a spectrumanalyzer to which options such as real-time signal analysis and vectormodulation analysis can be added.
The MS2850A enables high-speed and high-accuracy signal processing of
wide-ranging analyses at full-span, a characteristic of conventional
sweep-type spectrum analyzers, using a digital IF block. In addition, the
FFT process (high-speed Fourier conversion) realizes high-speed
spectrum analysis and simultaneous analysis on frequency and time axes
not possible with conventional sweep-type spectrum analyzers. Also, the
MS2850A enables recording of the RF input signal as digital data
(digitize function). It can be used in a variety of applications from
research and development to manufacturing thanks to its characteristics.
操作手册
pdf 6.5 MB
Version: 14
2021/5/13
This document describes type and size of memory and storage device inside Anritsu Signal Analyzer and Signal Generator
series in order to use safely the products against information security threat.
传单
pdf 119.3 KB
2020/11/3
The MS2850A or MS269xA Signal Analyzer enables high-speed,high-accuracy, and simple measurements of transmission characteristics
of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
操作手册
pdf 1.8 MB
Version: 3
2020/10/8
This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer. Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.
操作手册
pdf 2.1 MB
Version: 2
2020/10/8
The MS2850A or MS269xA Signal Analyzer enables high-speed,high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink,MX285051A-021 NR TDD mmWave Downlink,MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink,and MX285051A-071 NR TDD mmWave Uplink (hereinafter, referred to as “MX285051A-011/021/061/071 and MX269051A-011/061”) are software options for measuring RF characteristics according to 5G NR Standard defined by 3GPP.
操作手册
pdf 3.2 MB
Version: 8
2020/10/8
This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer (hereafter referred to as “this instrument”). Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.
操作手册
pdf 2.9 MB
Version: 8
2020/10/8
This simple guide is intended for test engineers with little experience in 5G base station Tx testing and for operators requiring efficient measurement; it explains an easy procedure using the MS2850A/MS269xA to measure the EVM of 5G NR downlink Test Model signals.
应用指南
pdf 1.4 MB
2020/6/3
This White Paper outlines measuring instruments for testing the basic radio performance of pulse-radar transmissions used
mainly for meteorological observations and air traffic-control systems.
白皮书
pdf 1.0 MB
2020/6/3
This application note explains the procedure for obtaining and measuring better EVM values for wide-band signals with an actual example using the Signal Analyzer MS2850A.
应用指南
pdf 1.4 MB
2020/4/24
This document explains the process from outputting 5G NR (New Radio) TDD (Time Division Duplex) wireless signals at the MG3710E to analyzing and displaying their properties with the Signal Analyzer MS2850A.
应用指南
pdf 1.0 MB
2020/4/24
This guide explains the simple procedure for installing firmware in the Signal Analyzer
MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.
用户手册
pdf 576.7 KB
2020/4/13
The MS2850A or MS269xA Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A/MX269051A 5G Standard Measurement Software (Base License) (hereinafter, referred to as “MX285051A/MX269051A”) allows measuring RF characteristics according to 5G standard by installing the software options such as MX285051A-001 Pre-Standard CP-OFDM Downlink.
操作手册
pdf 1.2 MB
Version: 4
2020/3/9
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
白皮书
pdf 608.5 KB
2019/12/26
This application can be controlled from an external controller (PC) by
remote control commands using the MS2690A/MS2691A/MS2692A or
MS2830A/MS2850A Signal Analyzer. Remote control commands for this application
are in the SCPI format defined by the SCPI Consortium.
操作手册
pdf 2.1 MB
Version: 18
2019/11/14
