Skip to main content




Notice of a Bug in Network Master Pro

Please be informed that a bug was found in latency measurement of MT1000A V9.10.

用户手册 PDF 212.3 KB 2019/8/23

WLAN Devices Issues with Poor Sensitivity USB Noise -Noise problems that cannot be solved simply by clearing EMC regulations-

New electrical devices with built-in WLAN often suffer from connection problems due to various factors. This leaflet describes some typical issues caused by noise from USB and explains effective methods for identifying these issues.

传单 pdf 1.0 MB 2019/8/21

5G NR Sub-6 GHz Measurement Methods

5G mobile communications systems use multiple connections to meet the need for increases in mobile data traffic volumes as well as new functions such as ultra-low-latency. 3GPP determining the standards released the 5G NR non-standalone (NSA) specifications for making connections via multiple radio technologies, such as LTE, in Release 15 in June 2018. Release 15 presumes the use of frequency bands up to 52.6 GHz and specifies the band from 450 MHz to 6 GHz as FR1 (Frequency Range 1), and from 24.25 GHz to 52.6 GHz as FR2 (Frequency Range 2). FR1 assumes use of the same wired tests as conventional wireless technologies whereas FR2 assumes OTA (Over the Air) testing. This application note references the 3GPP TS38.104 and TS38.141 Conformance Test specifications, and introduces TRx test measurement examples for wired connections with sub-6 GHz base stations covering FR1 using the Signal Analyzer MS2850A and Vector Signal Generator MG3710A.

应用指南 pdf 1.7 MB 2019/8/21

Spectrum Master MS2760A Maintenance Manual

This manual provides maintenance instructions for the MS2760A Spectrum Master. Familiarity with the basic operation of the MS2760A using the MS2760A GUI software is helpful. P/N: 10580-00433

维护手册 pdf 790.0 KB Version: C 2019/8/19

Uncovering Interference at a Co-Located 800 MHz P25 Public Safety Communication System Case Study

A public safety organization in northern Nevada was experiencing intermittent receive interference alarms on its 800 MHz P25 public safety communications system. An ordinary swept-tuned spectrum analyzer was used in an attempt to locate the interfering signals, however, none were found. After determining it was not a software issue, it was decided that the cause of the issue was likely to be an interfering signal with short duration or even a hopping signal that was being missed by the spectrum analyzer. A spectrum analyzer with real-time spectrum analysis (RTSA) was needed to be utilized to look for any interfering signals. P/N: 11410-01139

案例研究 pdf 2.7 MB Version: A 2019/8/19

VectorStar MS464xB Series Microwave Vector Network Analyzer Technical Data Sheet

This document provides detailed specifications for the MS4640B series microwave Vector Network Analyzers (VNAs), including all related options, and accessories. P/N: 11410-00611

技术指标 pdf 9.8 MB Version: Y 2019/8/13

Multiport VectorStar MN469xC Technical Data Sheet and Configuration Guide

This document provides the specifications for the MN469xC series Multiport Vector Network Analyzers test sets when used in conjunction with the 2-port VNA. P/N: 11410-00777

技术指标 pdf 3.3 MB Version: E 2019/8/13

Understanding Key Real-Time Spectrum Analyzer Specifications White Paper

Spectrum analyzers are the fundamental instrument used by RF engineers to measure individual signals across a defined frequency band. They capture and display wanted and unwanted signals, enabling a range of measurements including power, frequency, modulation and distortion. There are several different types of spectrum analyzer system architectures. This paper reviews the architecture of real-time spectrum analyzers (RTSA), swept-tuned spectrum analyzers, and vector signal analyzers, and highlight their relative merits and compromises. P/N: 11410-01138

白皮书 pdf 2.3 MB Version: A 2019/8/13

Consider Source Harmonics When Characterizing Filters with VNAs

This application note discusses how high source harmonics may interact with the out-of-band comeback characteristics of a filter under test to affect the filter transmission measurement. P/N: 11410-01142

应用指南 pdf 6.1 MB Version: A 2019/8/13

EU Declaration of Conformity for VectorStar Broadband VNA

This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00065

技术指标 pdf 107.3 KB Version: A 2019/8/13

Power Measurement Solutions

Download this solution card for an overview of the Power Sensors and Meters available from Anritsu. P/N: 11410-00558

传单 pdf 758.8 KB Version: E 2019/8/7

MA244xxA Peak Power Sensors User Guide

This User Manual provides the information needed to install, operate, and maintain the MA244xxA Peak Power Sensor. P/N: 10585-00033

用户手册 pdf 3.4 MB Version: A 2019/8/6

Microwave Peak USB Power Sensors Technical Data Sheet

The MA244xxA Series of Microwave Peak Power Sensors are designed to provide accurate, peak power measurements from 50 MHz to 6 GHz, 18 GHz, and 40 GHz with up to 80 dB of dynamic range and 195 MHz of video bandwidth. The sensors employ a parallel processing methodology that performs the multi-step process of RF power measurement at incredible, unmatched speeds. While conventional power meters and USB sensors perform steps serially, resulting in long re-arm times and missed data, Anritsu sensors capture, display, and measure every pulse, glitch, and detail with virtually no gaps in data and zero latency. P/N: 11410-01127

技术指标 pdf 1.8 MB Version: A 2019/8/6

Practical Uses for a Real-Time Spectrum Analyzer in 5G, LTE, and Wi-Fi Spectrum Monitoring

The measurement fundamental to all spectrum analyzers is their ability to measure power inside a given bandwidth at a particular frequency and to display those measurements across a frequency span. Over time, various features beyond simple power measurements were added to provide additional visibility into signal behavior. P/N: 11410-01141

应用指南 pdf 1.7 MB Version: A 2019/8/5

Microwave Site Master S820E Maintenance Manual

This manual provides service and maintenance information for the Site Master S820E Cable and Antenna Analyzer. The information includes product descriptions, replaceable parts information, performance verification procedures, parts removal and replacement procedures, and troubleshooting information. P/N: 10580-00345

维护手册 pdf 13.3 MB Version: D 2019/8/2

Spectrum Master MS2720T Product Brochure

The Spectrum Master MS2720T features over 30 analyzers in one to meet virtually every measurement need. P/N: 11410-00647

产品手册 pdf 4.4 MB Version: M 2019/8/2

Network Master Series MT9090A Mainframe - µOTDR Module MU909014x/15x

The μOTDR Module series MU909014x/15x for the MT9090A Network Master platform from Anritsu finally addresses this need by providing all of the features and performance required for installation and maintenance of optical fibers in a compact, modular test set.

产品手册 pdf 2.6 MB 2019/8/1

Network Master Series MT9090A Mainframe - Gigabit Ethernet Modules MU909060A1/A2/A3

The Ethernet technology is widely deployed and used for numerous applications. Therefore easy testing of Ethernet links is very important. When outfitted with the Gigabit Ethernet module, the very compact battery-powered, easy-to-use Anritsu Network Master is a comprehensive solution for Gigabit Ethernet testing and for installation and troubleshooting Ethernet communication lines. The instrument gives the user facilities for easy bandwidth verification, connectivity testing and service availability verification. The small size and low weight of the instrument makes it very easy to carry around for the field technician working with the Ethernet lines and despite the small size the instrument is equipped with a large display. The user can easily read and interpret information from the tested lines off the large color display with easy-to-understand colors and graphical symbols. And the graphical user interface makes it a simple task to configure and operate the instrument

产品手册 pdf 1.9 MB 2019/8/1

Network Master Series MT9090A Mainframe - Optical Channel Analyzer Module MU909020A

The MU909020A is ready for measurement in about 15 seconds, so productive work can start immediately. With no moving parts, the MU909020A is faster than any OSA, providing quick troubleshooting of a CWDM network.

产品手册 pdf 2.6 MB 2019/8/1

Radio Communication Analyzer MT8821C

The Radio Communication Analyzer MT8821C platform covers a frequency range of 30 MHz to 3.8 GHz (3.8 GHz to 6.0 GHz). When the dedicated optional measurement software and hardware is installed, the major TX and RX characteristics of LTE/LTE-Advanced (DL 3CA with 2x2 MIMO, UL 2CA, etc...) W-CDMA/HSPA/HSPA Evolution/DC-HSPA/4C-HSDPA, GSM/GPRS/EGPRS, CDMA2000 1X/1xEV-DO Rev. A,and TD-SCDMA/HSPA/HSDPA Evolution terminals can be measured using a single MT8821C unit.

产品手册 pdf 3.0 MB 2019/7/31


MX100001A windows control software

Download service of V9.10 is suspended due to a bug in latency measurement. Details are available here.

MX100001A windows control software.

MD5 : e4ce4c0ff25d541f11b8cd4f5b31fefc

驱动程序/软件下载 zip 67.0 MB Version: 9.09 2019/8/23

Software for MT1000A with MU100011A

Download service of V9.10 is suspended due to a bug in latency measurement. Details are available here.

Software of MT1000A.
Use it when using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

・ MU100011A 100G Multirate Module
・ MU100010A 10G Multirate Module
・ MU100020A OTDR Module
・ MU100021A OTDR Module
・ MU100022A OTDR Module
・ MU100040A/B CPRI RF Module
・ MU100090A High-Accuracy GPS Disciplined Oscillator

The file size is large, so download after checking your bandwidth.

MD5 : 33bf5d1983a254d0591d5cef4ef2f411

驱动程序/软件下载 zip 787.9 MB Version: 9.09 2019/8/23


Download service of V9.10 is suspended due to a bug in latency measurement. Details are available here.

Software of MT1000A.
Use it when NOT using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

・ MU100010A 10G Multirate Module
・ MU100020A OTDR Module
・ MU100021A OTDR Module
・ MU100022A OTDR Module
・ MU100040A/B CPRI RF Module
・ MU100090A High-Accuracy GPS Disciplined Oscillator

The file size is large, so download after checking your bandwidth.

MD5 : f4257f86286bf07d86249f5089c8ef1d

驱动程序/软件下载 zip 457.7 MB Version: 9.09 2019/8/23

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

驱动程序/软件下载 2019/8/22

Field Master Pro Software

This firmware contains the latest updates and features for your instrument. Download the file to a USB storage device, plug the device into the instrument, and update the software from the system information page.

驱动程序/软件下载 rau 253.2 MB Version: V2019.6.1 2019/8/21

Release History for the Field Master Pro Software

Release history for the Field Master Pro software which works with Field Master Pro MS2090A.

驱动程序/软件下载 pdf 116.9 KB Version: 2019.6.1 2019/8/21

Signal Generator Patterns for LMR Master S412E

Signal Generator Patterns for P25, P25 P2, DMR2, NXDN, PTC, NBFM, and TETRA modes.

驱动程序/软件下载 zip 176.8 MB Version: 1.12 2019/8/7

LMR Patterns history

History of the changes made to the LMR Patters file. Read this document to discover what patterns were added and when they were added.

驱动程序/软件下载 pdf 89.2 KB Version: 1.12 2019/8/7

MS4640B VectorStar Application (Software and DSP Firmware)

Unzip the downloaded file into a flash drive. Important: New software installation instructions are included. Please be sure to read the "VectorStar How To Install" document before installing.

驱动程序/软件下载 zip 511.8 MB Version: 2019.2.4 2019/7/31

VectorStar Application Installation

This version of software (and any other software version 2.1.0 and later, including those of format V201x.x.x) requires installation of Bittware 8.33 on the VNA prior to installation of the VectorStar application. Installation of Bittware is only needed once and does not need to be reinstalled at every VectorStar application installation. Please refer to Appendix A in this document for details about Bittware versions and installation of this driver.

驱动程序/软件下载 pdf 107.7 KB Version: 2019.2.4 2019/7/31

Firmware Update for the Remote Spectrum Monitor MS27100A, MS27101A, MS27102A and MS27103A

Download the latest firmware for the Anritsu Remote Spectrum Monitor models MS27100A, MS27101A, MS27103A, and MS27103A.

驱动程序/软件下载 tar 55.6 MB Version: 2018.9.3 2019/7/29

Firmware Revision History for the MS2710xA

Firmware Revision History for the MS27100A, MS27101A, MS27102A, and MS27103A Spectrum Monitors.

驱动程序/软件下载 pdf 135.5 KB Version: 2018.9.3 2019/7/29

IVI-C Installation Files

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

驱动程序/软件下载 exe 100.2 MB Version: v2019.7.1 2019/7/22

Release Note for IVI-C Driver

Release history for the IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

驱动程序/软件下载 pdf 148.7 KB Version: v2019.7.1 2019/7/22

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

驱动程序/软件下载 exe 234.9 MB Version: v2019.7.1 2019/7/22

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

驱动程序/软件下载 pdf 127.5 KB Version: v2019.7.1 2019/7/22

Signal Quality Analyzer -R Control Software

It is an installer to install the Signal Quality Analyzer-R Control Software.
Installer for the latest version.

MD5 : ed5814d36045667ecf74d006ddae4c7f

驱动程序/软件下载 zip 246.5 MB Version: 3.08.16 2019/7/16

MX183000A High-Speed Serial Data Test Software

It is an installer to install the MX183000A High-Speed Serial Data Test Software.
Installer for the latest version.

MD5 : caf0a2489268a892a432d9418bc2bb4a

驱动程序/软件下载 zip 64.8 MB Version: 3.08.05 2019/7/16

Advanced Time Domain ADK Software

Advanced Signal Integrity Design Kits (or, ADK) is a collection of many signal integrity utility tools. It is designed to pre- and post-process signal integrity (SI) simulation and measurement data in an easy-to-use, mobile-apps-like package. It helps SI engineers identify and correct errors and correlate between simulation and measurement within a few mouse clicks. A system's design cycle time is greatly improved as a result. ADK software is required for the Advanced Time Domain (option 22). Option 22 is a licensed option available on MS4652xB VNAs. For purchase and installation information, please contact Anritsu.

驱动程序/软件下载 exe 51.9 MB Version: 2019.05.14 2019/7/9

Advanced Time Domain ADK Software User Guide

This user guide walks you through the ADK software utility. The ADK software is required for Advanced Time Domain (option 22), which is a licensed option available on the MS46522B and MS46524B VNAs.

驱动程序/软件下载 pdf 3.7 MB Version: 2019.05.14 2019/7/9


Confirm your country below to see local events, contact information and special offers.