MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.
产品手册
pdf 5.2 MB
2022/6/8
Configuration Guide for the MS2830A Signal Analyzer
配置指南
pdf 606.9 KB
2022/5/18
Product Introduction for the Signal Analyzer MS2830A
产品简介
pdf 6.0 MB
2022/5/18
The MS2830A is a high-speed, high-performance, cost-effective Spectrum Analyzer/Signal Analyzer. Not only can it capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains.
产品手册
pdf 5.9 MB
2022/5/18
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
产品手册
pdf 5.9 MB
2022/5/18
The Analog Measurement Software MX269018A is software for measuring the TRx performance of radio equipment using analog modulation (FM/ΦM/AM). The Signal Analyzer MS2830A supports all-in-one tests of key analog wireless TRx characteristics using the built-in optional analog signal generator and audio analyzer. The Signal Analyzer MS2840A supports tests of key analog wireless Tx characteristics.
产品简介
pdf 2.4 MB
2022/5/11
This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.
传单
pdf 5.5 MB
2022/4/25
This is a leaflet about MT8000A/MT8821C, signal analyzer and signal generator used for 5G/LTE User Equipment RF evaluation.
传单
pdf 358.3 KB
2022/1/21
The MS2830A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The MS2830A enables high-speed and high-accuracy signal processing of
wide-ranging analyses at full-span, a characteristic of conventional
sweep-type spectrum analyzers, using a digital IF block. In addition, the
FFT process (high-speed Fourier conversion) realizes high-speed
spectrum analysis and simultaneous analysis on frequency and time axes
not possible with conventional sweep-type spectrum analyzers. Also,
added option enables recording of the RF input signal as digital data
(digitize function). It can be used in a variety of applications from
research and development to manufacturing thanks to its characteristics.
操作手册
pdf 9.6 MB
Version: 43
2021/5/13
This document describes type and size of memory and storage device inside Anritsu Signal Analyzer and Signal Generator
series in order to use safely the products against information security threat.
传单
pdf 119.3 KB
2020/11/3
This guide explains the simple procedure for installing firmware in the Signal Analyzer
MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.
用户手册
pdf 576.7 KB
2020/4/13
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
白皮书
pdf 608.5 KB
2019/12/26
The MX269022A LTE TDD Downlink Measurement Software is a software option for measuring the RF characteristics of LTE TDD (Frame structure type 2) downlink signal specified by 3GPP, TS36.211 V8.6.0 (2009-03) Physical Channels and Modulation (Release 8).
操作手册
pdf 2.3 MB
Version: 21
2019/11/14
This application can be controlled from an external controller (PC) by
remote control commands using the MS2690A/MS2691A/MS2692A or
MS2830A/MS2850A Signal Analyzer. Remote control commands for this application
are in the SCPI format defined by the SCPI Consortium.
操作手册
pdf 2.1 MB
Version: 18
2019/11/14
Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standard equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode.
You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for details.
操作手册
pdf 4.6 MB
Version: 57
2019/11/14
The MS2830A/MS2840A/MS2850A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The spectrum analyzer function enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.
操作手册
pdf 11.0 MB
Version: 40
2019/11/14
Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers. Ranging from high-performance and multi-function, high-end models for R&D to handheld models for field use.
选择指南
pdf 2.9 MB
Version: e1900
2019/6/28
This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series, MS2830A or MS2840A Signal Analyzer. The remote control commands are defined by
the SCPI format.
操作手册
pdf 1.7 MB
Version: 25
2019/3/27
The MX269017A Vector Modulation Analysis software is a software
option for performing modulation analysis of modulated signals.
操作手册
pdf 7.5 MB
Version: 32
2019/3/27
Leaflet of effective MS2830A functions targeting for Land Mobile Radio (LMR).
传单
pdf 925.5 KB
2019/3/26