Skip to main content

下载中心

按产品型号搜索

按文档类型

VNA Master MS20xxC Technical Data Sheet

MS202xC and MS203xC VNA Master plus Spectrum Analyzer, is the industry's broadest frequency handheld solution to address cable, antenna, component, and signal analysis needs in the field with frequency coverage from 5 kHz up to 20 GHz. P/N: 11410-00548

技术指标 pdf 8.3 MB Version: AM 2021/12/7

Network Installation and Mainenace Testing Instruments Solutions

This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing , Mobile/Wireless communication measureing instruments, Signal Analyzers/Spectrum Analyzers, Vector network Analyzers and RF Microwave measuring instruments products.

产品手册 pdf 1.3 MB 2020/10/5

Product Information, Compliance, and Safety for Anritsu Handheld Instruments

This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the equipment. P/N: 10100-00065

产品手册 pdf 1.4 MB Version: E 2020/9/8

Product Information, Compliance, and Safety for Anritsu Handheld Instruments

This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the equipment. P/N: 10100-00065

技术指标 pdf 1.4 MB Version: E 2020/9/8

VNA Master MS20xxC Online Help System

This Online Help System is a compilation of manuals for easier viewing. P/N: 10450-00030

在线帮助系统 htm 185.8 KB Version: F 2020/6/15

VNA Master MS20xxC User Guide

The VNA Master User Guide is part of a set of manuals that cover all of the instrument functions and their use. This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00305

用户手册 pdf 11.0 MB Version: N 2020/4/28

Rack Mount Accessory Installation Guide

This document provides instructions for mounting Anritsu handheld instruments in to the Anritsu Rack Mount Accessory, part number 66864. P/N:10580-00338

安装指南 pdf 3.5 MB Version: C 2020/2/7

Vector Network Analyzer for Handheld Instruments Measurement Guide

This Measurement Guide is for the VNA Master B and C series Vector Network Analyzers. The MS2026B and MS2028B VNA Master needs to have Firmware Version 2.0 and higher. Also covers the LMR Master in VNA mode. P/N: 10580-00289

测量指南 pdf 22.6 MB Version: M 2020/1/16

MS20xxC VNA Master Programming Manual

This SCPI Programming Manual provides information for remote operation of the MS20xxC Vector Network Analyzer (MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00306

编程手册 pdf 4.0 MB Version: K 2019/5/1

Wireless Travel Router 2000-1752-R Installation Guide

This guide provides general information, configuration and operation instructions for the 2000-1752-R wireless travel router. P/N: 10580-00432

安装指南 pdf 1.2 MB Version: D 2017/9/25

VNA Master MS20xxC Maintenance Manual

This manual provides service and maintenance information for the Anritsu MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C models of the handheld VNA Master.

维护手册 pdf 23.3 MB Version: F 2017/8/30

Advanced VNA Cable Measurements Product Brief

This field brief discusses phase-matching cables, S-parameter definitions as they apply to cable characterization and other cable parameters such as Phase Shift and Group Delay. Advanced Time-Domain measurements will also be presented as enhancements to the well-known Distance-to-Fault (DTF) techniques. In addition, diagnostic tools like the Smith Chart will be briefly described. P/N: 11410-00685

应用指南 pdf 3.3 MB Version: B 2017/7/28

Advanced VNA Cable Measurements Field Brief

This field brief will discuss phase-matching cables, S-parameter definitions as they apply to cable characterization and other cable parameters such as Phase Shift and Group Delay. Advanced Time-Domain measurements will also be presented as enhancements to the well-known Distance-to-Fault (DTF) techniques. In addition, diagnostic tools like the Smith Chart will be briefly described.

应用指南 pdf 3.3 MB Version: B 2017/7/28

Performance VNA Master Declaration of Conformity

The Performance VNA Master Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00036

技术指标 pdf 25.1 KB Version: A 2017/6/9

System Verification Software (SVS) 2300-533-R Quick Start Guide

This quick start guide provides a brief overview of the installation and use of the 2300-533-R System Verification Software and the SC7858 and SC7859 Verification Kits with handheld VNA Masters.p>

快速启动指南 pdf 1.1 MB Version: C 2013/7/16

Cable and Antenna Troubleshooting Guide

Utilize Anritsu handheld Site Master, Cell Master, and BTS Master for Cable and Antenna Measurements.

服务指南 pdf 2.0 MB Version: B 2013/3/12

手持式矢量网络分析仪+频谱仪MS20xxC-中文技术数据手册

高性能手持式 S参数测试仪 安立公司推出MS202x/3xC VNA Master矢量网络分析仪 + 频谱分析仪, 业界频率范围最宽的手持式解决方案,用于现场测量电缆,天线,器件和信号分析: 频率范围5 kHz 到 6/20 GHz。同样令人自豪地是这个现场测试工具是世界上第一个带12项误差修正,真正手持式,电池供电,坚固多功能的仪表。

技术指标 pdf 1.1 MB 2012/6/12

Measuring Radar Cross Section with Handheld VNAs

Radar cross section (RCS) is the measure of an object's ability to reflect radar signals in the direction of the radar receiver, i.e. it is the measure of the ratio of backscatter per steradian (unit solid angle) in the direction of the target radar to the power density intercepted by the target. RCS measurements help ensure the design of commercial and military aircraft and radar systems, as well as to maintain their performance once they are deployed.

文章 pdf 597.2 KB Version: A 2011/10/5

按文档类型

Firmware Update for the VNA Master MS202xC

This firmware update contains the latest upgrades for your MS2026C, MS2027C, and MS2028C Vector Network Analyzers. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 38.1 MB Version: 4.30 2021/5/10

Firmware Release History for the MS202xC and MS203xC

Firmware release history for the VNA Master MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C Vector Network Analyzers.

驱动程序/软件下载 pdf 428.2 KB Version: 4.30 2021/5/10

Anritsu Software Tool Box (Full Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer may not require internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools. This stand-alone installer will download all Anritsu software needed to install your chosen PC Tools software, and do so all in one file. This is ideal if you will be doing the installation on a computer without internet access. Windows 7, Windows 8 or Windows 10 computers may still need internet access to download the Microsoft .NET 3.5 suite of support files.

驱动程序/软件下载 exe 388.8 MB Version: 1.18 2019/4/10

70774 Instrument Test Software

Works with VNA Masters MS202xB, MS203xB, MS202xC, and MS203xC and LMR Master S412E.

驱动程序/软件下载 zip 7.8 MB Version: 1.03 2018/5/8

Anritsu Software Tool Box (Web Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer requires internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools.

驱动程序/软件下载 exe 401.0 KB Version: 1.09 2018/1/9

Updating Anritsu Handheld Instrument Firmware

This document provides an overview of the firmware update process. For further details, please refer to the user guide for your Anritsu handheld instrument.

驱动程序/软件下载 pdf 344.1 KB 2015/10/30