Skip to main content

下载中心

按产品型号搜索

按文档类型

Vector Signal Generator MG3710E

The MG3710E is a vector signal generator with 6 GHz upper frequency limit and 120 MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, Bluetooth and GPS.

产品手册 pdf 3.9 MB 2022/12/5

MG3700A/MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Operation Manual (IQproducer)

The IQproducerTM is Windows application software used to generate a modulated waveform pattern to be used in the Vector Signal Generator MG3700A/MG3710A or the Analog Signal Generator MG3740A, which integrates an arbitrary waveform generator. The IQproducerTM for MG3700A/MG3710A/MG3740A also transfers the generated data to the MG3700A/MG3710A/MG3740A via LAN.

操作手册 pdf 8.0 MB Version: 19 2022/10/24

Vector Signal Generator MG3710E

This document explains how to order the new MG3710E and MG3710E/MG3710A retrofit options and software.

配置指南 pdf 995.8 KB 2022/9/7

Adjusting MIMO Phase Coherence using Vector Signal Generator

This application note explains how to synchronize RF signals between multiple channels when simulating a MIMO transmitter by using Anritsu's MG3710A Vector Signal Generator.

应用指南 pdf 673.4 KB 2022/4/1

Evaluating C-band Radio Altimeter using 5G Signal Generator

This leaflet introduces the Vector Signal Generator MG3710E as a signal source for interference waves that affect the ranging performance of C-band (4 to 8 GHz) radio altimeters.

传单 pdf 261.0 KB 2022/3/30

MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Operation Manual

The MG3710A/MG3710E is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment. The MG3740A is an analog signal generator. It can be used for a wide range of applications, from R&D to manufacturing of analog radio base stations, devices, and equipment.

操作手册 pdf 23.5 MB Version: 21 2022/3/10

MX370107A Fading IQproducer Operation Manual

MX370107A Fading IQproducer is software used to read waveform patterns and generate fading-processed waveform patterns.

操作手册 pdf 5.7 MB Version: 7 2022/3/10

DFS (ETSI) Waveform Pattern MX370075A

Installing the MX370075A DFS (ETSI) Waveform Patterns option in the MG3710A Vector Signal Generator supports output of ETSI EN 301 893 DFS test signals. Output of complex combinations of pulse and chirp signals required to support DFS tests is made easy just by selecting combination files supplied with the MX370075A.

产品简介 pdf 536.3 KB 2022/3/8

DFS Radar Pattern MX370073B

Installing the DFS Radar Pattern MX370073B option in the Vector Signal Generator MG3710A/MG3710E supports output of FCC and Japan MIC standard DFS test signals. External PC not required. Simply selecting prepared waveform pattern outputs various signals using MG3710A/MG3710E built-in Sequence function. Offers 5.3-GHz band waveform patterns adopted by Japan MIC standard in July 2019

产品简介 pdf 860.1 KB 2022/3/8

Vector Signal Generator MG3710E

The MG3710E is a vector signal generator with 6 GHz upper frequency limit and 120 MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as 5G NR, LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, Bluetooth and GPS.

产品简介 pdf 5.0 MB 2022/2/24

5 GHz Band WLAN Device DFS Tests - Support for FCC, ETSI, Japan MIC Standards

Installing the DFS Radar Patterns option MX370073B/MX370075A in the Vector Signal Generator MG3710E supports output of FCC, ETSI and Japan MIC standards DFS test signals. Output of complex combinations of pulse, chirp and hopping signals required to support DFS tests is made easy just by selecting combination files supplied with the MX370073B/MX370075A.

传单 pdf 940.3 KB 2022/2/24

RF Signaling call box, Signal Analyzer and Signal Generator for 5G/LTE User Equipment RF Evaluation

This is a leaflet about MT8000A/MT8821C, signal analyzer and signal generator used for 5G/LTE User Equipment RF evaluation.

传单 pdf 358.3 KB 2022/1/21

Interference Test of 5G/LTE User Equipment with Signal Generator and RF Signaling call box

This is a leaflet about the interference test of 5G/LTE User Equipment with signal generator and MT8000A/MT8821C

传单 pdf 218.1 KB 2022/1/21

MX370x series software - Waveform Pattern MX3700xxA / MX3710xxA

Each category contains multiple waveform pattern files each with preset parameters for each system. These default waveform patterns are saved on the MG3710A/B hard disk for easy access, but other waveform patterns are supported using the IQproducer waveform generation software.

产品手册 pdf 2.2 MB 2022/1/21

MX370x series software - IQproducer MX3701xxA

Parameters for the waveform for the target communication system are set using a GUI to a generate a waveform pattern file for the MG3710A. The embedded Windows application IQproducer saves generated arbitrary waveform pattern files to the internal hard disk and signals are output simply by selecting the waveform pattern. In addition, a user-generated custom IQ sample file in ASCII format created by common Electronic Design Automation (EDA) software such as MATLAB, can be converted into a custom waveform pattern file for the MG3710A.

产品手册 pdf 6.2 MB 2022/1/21

MX371055A Interference Waveform Pattern for 5G NR Receiver Test Operation Manual

MX371055A Interference Waveform Pattern for 5G NR Receiver Test (hereafter “this waveform pattern”) contains interference waveform pattern conforming to the 3GPP TS38.521-1 V17.0.0 (2021-03). Installing this waveform pattern to the MG3710A/MG3710E Vector Signal Generator (hereafter MG3710A/MG3710E) supports generation of interference waveform pattern signals used at 5G NR UE of Sub-6 GHz band for receiver tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A/MG3710E using the pattern. When using this pattern on multiple MG3710A/MG3710E units, a license must be purchased for each MG3710A/MG3710E unit using this pattern.

操作手册 pdf 581.4 KB Version: 1 2022/1/17

MX371054A Interference Waveform Pattern for LTE Receiver Test Operation Manual

MX371054A Interference Waveform Pattern for LTE Receiver Test (hereafter “this waveform pattern”) contains interference waveform pattern conforming to the 3GPP TS36.521-1 V16.7.0 (2020-12). Installing this waveform pattern to the MG3710A/MG3710E Vector Signal Generator (hereafter MG3710A/MG3710E) supports generation of interference waveform pattern signals used at LTE UE for receiver tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A/MG3710E using the pattern. When using this pattern on multiple MG3710A/MG3710E units, a license must be purchased for each MG3710A/MG3710E unit using this pattern.

操作手册 pdf 567.4 KB Version: 1 2022/1/17

5G Solutions Catalog 2021

Introduces Anritsu 5G solutions and products. Anritsu will contribute to customer's 5G product development and future innovation of network.

产品手册 pdf 3.0 MB 2021/11/30

Testing O-RAN Equipment

Introducing Anritsu’s test solutions for O-RAN fronthaul (O-FH) equipment which is configured as an O-DU (O-RAN Distributed Unit) and O-RU (O-RAN Radio Unit) with a lower functional “Split 7-2x”.

传单 pdf 336.6 KB 2021/6/2

Multi-Standard Radio Signal Generation using MG3710A / MG3710E Waveform Combine Function

Unlike general-purpose vector signal generators, the MG3710A/MG3710E can generate a combined signal for different wireless systems, such as LTE, W-CDMA, GSM, etc. This application note explains some of the problems when generating signals for combinations of different wireless systems using a general-purpose vector signal generator. It also explains how to solve these problems using the MG3710A/MG3710E and then introduces an example of how to generate Multi-Standard Radio signals.

应用指南 pdf 1.2 MB 2021/4/21

按文档类型

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

驱动程序/软件下载 2020/12/17

按产品类别