Skip to main content
MENU

下载中心

按产品型号搜索

按文档类型

New VNA Technologies Enable Millimeter-Wave Broadband Testing to 220 GHz White Paper

This white paper discusses the market and technology trends that are driving demand for higher frequency solutions. Moreover, it provides details of the challenges faced by design engineers as they attempt to perform wafer-level testing over broadband millimeter-wave frequencies. Lastly, illumination is provided on how Anritsu engineers were able to innovate with broadband vector network analyzer (VNA) and mmWave connector technology to enable broadband testing to 220 GHz with a single test unit and setup. P/N: 11410-01149

白皮书 pdf 482.3 KB Version: A 2020/1/28

Anti-Virus Measures for Instruments with Windows Operating System

We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.

白皮书 pdf 608.5 KB 2019/12/26

1914.3 (RoE) eCPRI Transport

This White Paper discusses the network architecture changes, new frame formats, expected timing, and latency requirements, and why they are required. Understanding the combination of these key areas will provide the background to understanding how these networks will look as this industry moves rapidly to 5G.

白皮书 pdf 3.3 MB 2019/11/18

Understanding Key Real-Time Spectrum Analyzer Specifications White Paper

Spectrum analyzers are the fundamental instrument used by RF engineers to measure individual signals across a defined frequency band. They capture and display wanted and unwanted signals, enabling a range of measurements including power, frequency, modulation and distortion. There are several different types of spectrum analyzer system architectures. This paper reviews the architecture of real-time spectrum analyzers (RTSA), swept-tuned spectrum analyzers, and vector signal analyzers, and highlight their relative merits and compromises. P/N: 11410-01138

白皮书 pdf 2.1 MB Version: B 2019/9/30

Evaluation of RF Network Testing

This document is an industry review of techniques and procedures for evaluation of RF network testing. P/N: 11410-00700

白皮书 pdf 827.0 KB Version: B 2019/6/17

A New Technique for Measuring Passive Intermodulation Over Fiber Optic Cables White Paper

This white paper outlines how PIM over CPRI works and how to get the most of out of this measurement technique. PIM over CPRI is your first step in determining if a site has PIM issues before calling in a PIM mitigation team. P/N: 11410-01135

白皮书 pdf 336.0 KB Version: A 2019/6/4

Accuracy of DTF Measurements on New Spools of Transmission Line White Paper

With proper consideration and technique, DTF measurements of raw spools of cable can be made accurately enough in the field to identify handling damage with a reasonable uncertainty bound. P/N: 11410-00899

白皮书 pdf 3.2 MB Version: C 2019/3/6

Millimeter-wave Partial Information De-embedding: Errors and Sensitivities White Paper

De-embedding methods making significant structural assumptions have become popular in recent years, particularly in PC board and cable assembly spaces, because of the relative immunity to repeatability and standards availability problems at the DUT plane. Some of the same issues occur in mm- wave fixtures where repeatability can be even more of a challenge. This white paper goes through the methods and behaviors of these challenges. P/N: 11410-01080

白皮书 pdf 930.8 KB Version: B 2018/8/23

Superposition vs. True-Balanced: What's Required for your Signal Integrity Application White Paper

The superposition technique relies on the inherent linear nature of a transmission line, and mathematically derives the differential and common-mode transmission line characteristics through superposition while stimulating just one side of the balanced transmission line at a time. The true-balanced/differential technique, also known as True-Mode Stimulus, uses two sources to create actual differential and common-mode stimuli. This white paper offers guidance to signal integrity designers on the differences between these approaches and which one may best fit their need. P/N: 11410-00659

白皮书 pdf 314.3 KB Version: D 2018/8/23

The Impact of Return Loss on Base Station Coverage in Mobile Networks

In this paper we will focus on losses due to reflections. These reflections are measured using a cable and antenna analyzer such as the Anritsu Site Master. Operators often specify that the worst case reflections (return loss) over the operating frequency range of the system must be 18 dB. But, what exactly does that mean? It means the reflected signal must be 18 dB lower than the signal that is transmitted into the system. Or, another way of looking of this is that the reflected signal must be less than 1/64th the magnitude of the signal transmitted into the system. Where did this limit come from? In many cases, it has been based on what an operator knows is possible when high quality components are installed according to the manufacturer’s specifications using good workmanship. As feed systems become shorter and antenna systems are required to operate over broader frequency ranges, achieving an 18 dB return loss may not be practical.

白皮书 pdf 711.3 KB Version: B 2018/3/29

RF and Microwave Material Measurements: Techniques and Applications White Paper

Continual demand to accurately measure dielectric and magnetic properties of materials is a common need and is apparent in our every day lives. There is a need to quantitatively characterize material properties at RF and microwave frequencies. Learn more about the use of vector network analyzers (VNAs) as a flexible and versatile tool to accurately and quantitatively characterize material properties and showcase the broad applicability of the VNA as a tool to accurately do this at high frequencies.

白皮书 pdf 1.2 MB Version: A 2018/3/14

Wideband Optical Modulator and Detector Characterization

Uncertainties and the Impact on Eye Diagrams/Time Domain Modeling

The characterization and measurement of E/O and O/E components at higher microwave frequencies has a different uncertainty distribution than at lower frequencies. A careful process can help minimize many of those categories. The individual uncertainty components have very different effects on final subsystem modeled time domain results, such as eye diagrams. Understanding that error propagation can be useful. In a practical example, optimizing the critical uncertainty components can lead to noticeably better eye behavior in the final model.

白皮书 pdf 817.7 KB Version: B 2018/2/6

Understanding Cable & Antenna Analysis

The cable and antenna system plays a crucial role of the overall performance of a Base Station system. Degradations and failures in the antenna system may cause poor voice quality or dropped calls. From a carrier standpoint, this could eventually result in loss of revenue. P/N: 11410-00427

白皮书 pdf 1.5 MB Version: F 2017/10/24

Understanding LTE‐A HetNet Interference Mitigation Techniques

This white paper discusses the evolution from LTE to LTE-A, and the benefits and challenges this has brought about. It then talks about heterogeneous networks (HetNet), the interference challenges they create, and the interference mitigation techniques added in response.

白皮书 pdf 817.0 KB 2017/10/2

Impact of Reciprocal Path Loss on Uplink Power Control for LTE

This case study shows the impact of testing LTE PUCCH power control of the device under truly reciprocal channel conditions that factor the downlink and uplink variations.

白皮书 pdf 672.3 KB 2017/10/2

Testing Drones – The Challenges & Smart Solutions

This white paper talks about the emergence of (nonmilitary) drones, with a focus on some of the challenges associated with testing drones and proposed solutions.

白皮书 pdf 598.4 KB 2017/10/2

Classical and Wi-Fi Doppler Spectra – Comparison and Applicability

This white paper introduces and compares the classical (Jakes) and Wi-Fi (Bell) spectra and provides some much-needed guidance on the Doppler Spectrum to be used for mobile Wi-Fi devices.

白皮书 pdf 499.1 KB 2017/10/2

Burst Detect

Burst detect is a sweep method that makes it easy to see short-duration, bursty signals, such as those emanating from an improperly installed cell phone booster. It can also show the envelope of a Wi-Fi signal – which is basically anything that occurs infrequently. A 1% duty cycle is enough to detect a bursty signal. As many as 20,000 measurements per second – thousands of times faster than a normal FFT – can be made with the Burst Detect method. The result is that users can see a 200 microsecond pulse every time, making it much easier to find burst signals.

白皮书 pdf 1.9 MB Version: B 2017/6/30

Sequential Peeling: a Model-Based Approach to Structure Identification and De-embedding

Sequential peeling is a model/measurement-based method at network extraction for de-embedding. It uses isolatable phase responses of defects to create a lumped-element description of a structure (shunt, series, or cross-bar) that can be physically meaningful and useful in sequential de-embedding. The method works best when the significant reflections are electrically small and isolated and the overall loss of the fixture is not too great but there are corrections available to help with the loss element.

白皮书 pdf 1.3 MB Version: A 2017/6/6

Scaling the Test Equipment Size to Match Millimeter Wave Test Needs

This white paper will discuss issues of transferring millimeter wave signals through coax cable within a test system and the benefits of improved measurement accuracy by reducing the size of the test equipment and using fewer interconnections.

白皮书 pdf 1.7 MB Version: A 2017/2/14

按文档类型

Software for MT1000A with MU100011A

Software of MT1000A.
Use it when using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

・ MU100011A 100G Multirate Module
・ MU100010A 10G Multirate Module
・ MU100020A OTDR Module
・ MU100021A OTDR Module
・ MU100022A OTDR Module
・ MU100023A OTDR Module
・ MU100040A/B CPRI RF Module
・ MU100090A High-Accuracy GPS Disciplined Oscillator

The file size is large, so download after checking your bandwidth.

MD5 : c86d4f81410794088503caac6877ebb3

驱动程序/软件下载 zip 793.5 MB Version: 10.00 2020/2/20

MT1000A_Software

Software of MT1000A.
Use it when NOT using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

・ MU100010A 10G Multirate Module
・ MU100020A OTDR Module
・ MU100021A OTDR Module
・ MU100022A OTDR Module
・ MU100023A OTDR Module
・ MU100040A/B CPRI RF Module
・ MU100090A High-Accuracy GPS Disciplined Oscillator

The file size is large, so download after checking your bandwidth.

MD5 : 7845dcf8d0da05146752cdf3194bf949

驱动程序/软件下载 zip 460.7 MB Version: 10.00 2020/2/20

MX100001A windows control software

MX100001A windows control software.

MD5 : 967eb8d020f4362dedfde30358e7efff

驱动程序/软件下载 zip 67.6 MB Version: 10.00 2020/2/20

Network Master Pro/Flex Release Notes

Release information for the latest version of MT1000A/MT1100A

驱动程序/软件下载 pdf 765.0 KB Version: 10.00 2020/2/20

MT1000A OTDR Modules Quick Reference Guide

This is the quick reference guide of the MT1000A OTDR.

驱动程序/软件下载 pdf 2.1 MB Version: 7.0 2020/2/20

MX100003A Scenario Edit Environment Kit

MX100003A Scenario Edit Environment Kit
This software can create and edit a scenario file for MT1000A/MT1100A.

MD5 : 58359d795b7471a84753de5732d929d9

驱动程序/软件下载 zip 68.0 MB Version: 2.0.0.53 2020/2/20

Release Note V10.00 (Illustration)

This is the illustrated version of MT1000A/MT1100A release note. Some contents of release note are explained with figure.

驱动程序/软件下载 pdf 20.9 MB Version: 10.00 2020/2/20

Firmware Update for the LMR Master S412E

This firmware update contains the latest upgrades for your instrument. Installation instructions are included in the download.

驱动程序/软件下载 exe 50.1 MB Version: 3.80 2020/2/14

LMR Master S412E Firmware Release History

Firmware release history for the LMR Master S412E.

驱动程序/软件下载 pdf 592.8 KB Version: 3.80 2020/2/14

Firmware Update for the BTS Master MT8220T

This firmware update contains the latest upgrades for your instrument. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 69.5 MB Version: 3.80 2020/2/14

Firmware Revision History for the BTS Master MT8220T

Firmware release history for the MT8220T BTS Master.

驱动程序/软件下载 pdf 422.0 KB Version: 3.80 2020/2/14

Firmware Update for the VNA Master MS202xC

This firmware update contains the latest upgrades for your MS2026C, MS2027C, and MS2028C Vector Network Analyzers. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 38.1 MB Version: 3.80 2020/2/14

Firmware Update for the VNA Master MS203xC

This firmware update contains the latest upgrades for your MS2036C, MS2037C, and MS2038C Vector Network Analyzers. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 38.1 MB Version: 3.80 2020/2/14

Firmware Release History for the MS202xC and MS203xC

Firmware release history for the VNA Master MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C Vector Network Analyzers.

驱动程序/软件下载 pdf 497.1 KB Version: 3.80 2020/2/14

Firmware Update for the VNA Master MS202xB

This firmware update contains the latest upgrades for your VNA Master MS2024B and MS2025B Vector Network Analyzer. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 36.5 MB Version: 3.80 2020/2/14

Firmware Update for the VNA Master MS203xB

This firmware update contains the latest upgrades for your VNA Master MS2034B and MS2035B Vector Network Analyzer. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 36.5 MB Version: 3.80 2020/2/14

Firmware Release History for the MS202xB and MS203xB

Firmware release history for the VNA Master MS2024B, MS2025B, MS2034B, and MS2035B Vector Network Analyzers.

驱动程序/软件下载 pdf 509.1 KB Version: 3.80 2020/2/14

Firmware Update for the Spectrum Master MS271xE

This firmware update contains the latest upgrades for the Spectrum Master MS2711E, MS2712E, and the MS2713E. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 75.1 MB Version: 3.80 2020/2/14

Firmware Update for the Cell Master MT821xE

This firmware update contains the latest upgrades for the Cell Master MT8212E and MT8213E. Once downloaded, run the file on your computer to see the installation instructions.

驱动程序/软件下载 exe 75.1 MB Version: 3.80 2020/2/14

Firmware Revision History for the MS271xE and MT821xE

Firmware release history for the Spectrum Master MS2711E, MS2712E and MS2713E handheld spectrum analyzer Family. Also includes the history for the Cell Master MT8212E and MT8213E

驱动程序/软件下载 pdf 922.5 KB Version: 3.80 2020/2/14

按产品类别

Confirm your country below to see local events, contact information and special offers.