Skip to main content
MENU
移动式干扰查找系统 MX280007A

移动式干扰查找系统

MX280007A
Overview

安立移动式干扰信号查找系统-- “快速、可靠、对应多个干扰源”

4G网络运营商受到他们客户对在线生活方式的依赖的驱动,对缩减网络干扰拥有强烈的兴趣。不断增长的随时随地保持连接的需求,导致了网络容量和吞吐量的迅速增长。

安立的移动干扰信号查找系统,作为安立公司监测与干扰查找产品系列产品之一,能够快速可靠地在移动的车辆上来定位干扰信号,即使有多个干扰源(比如泄漏的CATV系统)存在或有合法的上行信号。它在包括阴影、多径及发射等各类复杂的射频条件下都能发挥作用,脉冲或突发信号也可被快速发现。

关键能力包括:

  • 大多数车辆只需要5分钟来设置,无需专用的车辆。
  • 多个干扰发射源定位,比如CATV信号出口。
  • Power-of-Arrival技术结合对射频多径、频率漂移、阴影及发射的辨别让用户能够发现真实信号源。
  • 后期捕获分析允许回放驾驶过程中的不同决策阈值。这让之后专家分析,迭代分析相关测试数据变为可能。
  • 简化频谱清理过程,即使在上行链路在工作中。可以可靠地定位多个脉冲或突发信号,甚至短至200微秒。
  • 用一个小磁吸全向天线使得排查工作相对隐蔽。

Anritsu’s Mobile InterferenceHunter MX280007A is a quick and reliable way to find single or multiple sources of interference. The ability to work with multiple signal sources, reflections, RF shadows, drifting signals, bursty signals, and multi-path distinguish the Mobile InterferenceHunter MX280007A from more expensive solutions targeted at single fixed frequency interference sources.

The Mobile InterferenceHunter’s post-capture analysis capability allows users to modify search parameters without re-driving the route. This allows re-analysis of the captured data as well as consulting with experts.

The Mobile InterferenceHunter works with the broad array of Anritsu’s handheld spectrum analyzers, providing interference hunting and spectrum clearing capability from 9 kHz to 110 GHz. The Mobile InterferenceHunter is a quick, reliable, and multi-emitter enabled solution to your interference hunting and spectrum clearing needs.

Sample Mobile InterferenceHunter System Components

For a full description of the Mobile InterferenceHunter MX280007A, please see the product brochure, available under the Library tab.

By utilizing Anritsu’s proprietary interference finding algorithms, the Mobile InterferenceHunter MX280007A software will quickly determine the position estimate of an interfering signal. Once sufficient measurements are accumulated in Area Scan™ mode, the Mobile InterferenceHunter MX280007A software can create a heat map indicating the position of the interference source. The heat map becomes smaller as more measurements are taken, refining the signal location estimate.

With a user interface optimized for Windows touchscreen tablets the MX280007A software is simple to use. Features include:

  • Max Hold to find interferers which show up periodically (i.e. “radar type” signals)
  • Min Hold to find interferers buried underneath the intended signal (ideal for finding signals hidden in LTE uplink bands)
  • Squelch Control to view only signals above a certain threshold
  • Sensitivity settings from Dense Urban to Rural terrain categories
  • Area Scan mode to quickly localize the signal source
  • Choice of map sources: Google Maps, Baidu Maps, or OpenStreetMap
  • Zoom In/Out commands for desired street level view
  • Full Screen Spectrum View for better examination and analysis of the spectrum
  • Growing Breadcrumbs of the drive route that indicate higher signal strength as you drive closer to the interference source
  • Single or multiple emitter detection modes make it easy to use for any type of emitter detection application (multiple emitter mode is ideal for locating multiple cable TV interferers)
  • A spectrum clearing mode using channel power measurements that map signals above a certain power threshold
  • Integrated help system for user assistance

The Anritsu Mobile InterferenceHunter MX280007A works with many existing Anritsu handheld spectrum analyzers that are enabled with a GPS receiver. These include platforms such as Site Master™, Spectrum Master™, BTS Master™, Cell Master™, LMR Master™, Remote Spectrum Monitor, and the Spectrum Master MS2760 Ultraportable solution. No firmware updates are needed.

The Anritsu Mobile InterferenceHunter solution is designed to be best-in-class for its interference detection capability and ease of use. No other inference hunting system is as efficient and simple to use with easy set-ups for safe one-person operation.

笔记本电脑/平板电脑规格要求

移动干扰信号查找系统可以在Windows 7或Windows 8系统上工作,推荐使用Windows 8因为其可以支持触摸屏。

Windows 平板电脑/笔记本最低配置要求:

  • 双核或四核处理器 (> 1 GHz)
  • 2 GB RAM
  • 32 GB内存
  • 1个 USB端口
  • 音频接口

Supported Analyzers

Product Family Instrument
BTS Master
MT8220T
Cell Master
MT8212E
MT8213E
LMR Master
S412E
Remote Spectrum Monitor
MS27101A
MS27102A
MS27103A
Site Master
S332E
S362E
Spectrum Master
MS2760A
MS2712E
MS2713E
MS2720T
VNA Master
MS2034B
MS2035B
MS2036C
MS2037C
MS2038C
地图

通过 OpenStreetMap™ 可使干扰追踪软件的地图内嵌于应用程序中。 Anritsu 为用户提供协助完成此流程的网页:


Anritsu 移动式干扰信号查找系统地图


用户可选择此网页上的现有地图。 此外,用户可以使用易用的指令通过 OpenStreetMap 设计所需的地图。

地图设计完成后,将地图文件拖入干扰追踪软件应用程序窗口即可将其集成到 MX280007A 软件中。 单击 MX280007A 软件顶部的设置选项卡,选择地图来源/打开来源地图,可以添加地图。

或者,使用蜂窝调制解调器来连接网络的平板电脑可以下载 Google 地图来满足应用需要。



© OpenStreetMap contributors copyright page

附件

Magnet Mount Broadband Antennas

型号 说明
2000-1645-R 694-894 MHz 3 dBi peak gain
1700 – 2700 MHz 3 dBi peak gain, N(m), 50 Ω, 10 ft
2000-1646-R 750-1250 MHz 3 dBi peak gain,
1650 – 2000 MHz 5 dBi peak gain,
2100 – 2700 MHz 3 dBi peak gain, N(m), 50 Ω, 10 ft
2000-1647-R Cable 1: 698 MHz – 1200 MHz 2 dBi peak gain, 1700 MHz – 2700 MHz 5 dBi peak gain, N(m), 50 Ω 10 ft
Cable 2: 3000 MHz – 6000 MHz 5 dBi peak gain, N9m), 50 Ω, 10 ft
Cable 3: GPS 26 dB gain, SMA(m), 50 Ω, 10 ft
2000-1648-R 1700 – 6000 MHz 3 dBi peak gain, N(m), 50 Ω, 10 ft

Directional Antennas

型号 说明
2000-1411-R 822 MHz – 900 MHz, N(f), 10 dBd, Yagi
2000-1412-R 885 MHz – 975 MHz, N(f), 10 dBd, Yagi
2000-1413-R 1710 MHz – 1880 MHz, N(f), 10 dBd, Yagi
2000-1414-R 1850 MHz – 1990 MHz, N(f), 9.3 dBd, Yagi
2000-1415-R 2400 MHz – 2500 MHz, N(f), 10 dBd, Yagi
2000-1416-R 1920 MHz to 2170 MHz, N(f), 10 dBd, Yagi
2000-1617 600 MHz – 21 GHz, N(f), 5 – 8 dBi gain to 12 GHz, 0 – 6 dBi gain – 21 GHz, Log Periodic
2000-1659-R 698 MHz – 787 MHz, N(f), 8 dBd, Yagi
2000-1660-R 1425 MHz – 1535 MHz, N(f), 12 dBd, Yagi
2000-1677-R 300 MHz – 3000 MHz, SMA(m), 50 ohm, 3 m cable (9.8 ft) 0 – 6 dBi gain @ 950 MHz, Log Periodic
2000-1715-R 698 MHz – 2.5 GHz Bi-blade
2000-1726-R 2500 MHz – 2700 MHz, N(f), 12 dBd, Yagi
2000-1747-R 300 MHz – 5000 MHz, N(f), Log Periodic
2000-1748-R 1 GHz – 18 GHz, N(f), Log Periodic

GPS Antennas

型号 说明
2000-1528-R GPS Antenna, SMA(m) with 5 m (15 ft) cable, requires 5 VDC
2000-1652-R GPS Antenna, SMA(m) with 0.3 m (1 ft) cable, requires 3.3 VDC or 5 VDC

Bandpass Filters

型号 说明
2000-1734-R Bandpass Filter, 699 MHz – 715 MHz, 50 ohm, type N9m) and N(f)
2000-1735-R Bandpass Filter, 776 MHz – 788 MHz, 50 Ω, type N(m) and N(f)
2000-1736-R Bandpass Filter, 815 MHz – 850 MHz, 50 Ω, type N(m) and N(f)
2000-1737-R Bandpass Filter, 1711 MHz – 1756 MHz, 50 Ω, type N(m) and N(f)
2000-1738-R Bandpass Filter, 1850 MHz – 1910 MHz, 50 Ω, type N(m) and N(f)
2000-1739-R Bandpass Filter, 880 MHz – 915 MHz, 50 ohm, type N(m) and N(f)
2000-1740-R Bandpass Filter, 1710 MHz – 1785 MHz, 50 ohm, type N(m) and N(f)
2000-1741-R Bandpass Filter, 1920 MHz – 1980 MHz, 50 ohm, type N(m) and N(f)
2000-1742-R Bandpass Filter, 832 MHz – 862 MHz, 50 ohm, type N(m) and N(f)
2000-1743-R Bandpass Filter, 699 MHz – 715 MHz, 50 Ω, type N(m) and N(f)
2000-1798-R Port Extender
2000-1799-R Bandpass Filter, 2305 MHz – 2320 MHz, 50 ohm, type N(m) and N(f)

Miscellaneous Accessories

型号 说明
3-2000-1498 USB A-mini B Cable, 10 ft (305 cm)
806-141-R Automotive Power Adapter, 12 VDC, 60 W
MA2700A InterferenceHunter™ Handheld Direction Finding System
视频
Introducing the Anritsu Mobile Interference Hunting System

Introducing the Anritsu Mobile Interference Hunting System
When interference is causing degradation in your network, you need to locate the offending interferer quickly. The Anritsu Mobile Interference Hunting System automates the interference hunting process. The system is easy to set up and easy to use.

Interference Hunting Made Easy

Interference Hunting Made Easy
When interference is causing degradation in your network, you need to locate the offending interferer quickly. The Anritsu Mobile Interference Hunting System automates the interference hunting process. The system is easy to set up and easy to use.

在下面确认您所在国家,以查看当地活动、联系信息和优惠活动。