Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617
Brochure
pdf 1.8 MB
Version: H
22/12/2022
Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
Brochure
pdf 11.4 MB
Version: AC
21/12/2022
Poster showcasing the RF and Microwave Handheld analyzers options. Features Cable and Antenna Analyzers, Base Station Analyzers, Field Master Pro, Spectrum Analyzers, Vector Network Analyzers, and PIM Analyzers. P/N: 11410-00571
Brochure
pdf 325.0 KB
Version: T
21/12/2022
Passive Intermodulation Analyzer with Site Master Cable and Antenna Analyzer option.
Suitable for commissioning and maintaining global wireless networks. This high performance, battery operated unit allows operators to fully characterize infrastructure quality by measuring Return Loss, VSWR, Cable Loss, Passive Intermodulation, Distance-to-Fault, and Distance-to-PIM with a single test instrument. P/N: 11410-00821
Datasheet
pdf 5.9 MB
Version: AD
11/11/2022
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00050 | OHS | N | 10/26/2022
Online Help System
html 212.9 KB
Version: N
26/10/2022
This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the
equipment. P/N: 10100-00065
Datasheet
pdf 1.4 MB
Version: F
24/10/2022
This SCPI Programming Manual provides information for remote operation of the PIM Master MW82119B, Passive Intermodulation (PIM) Analyzer, using commands sent from an external controller through the USB or Ethernet connection. P/N: 10580-00403
Programming Manual
pdf 2.5 MB
Version: M
18/10/2022
The Site Master, Cell Master, and PIM Master (MW82119B with Option 331) offer a wide
range of cable and antenna measurements: Return Loss, VSWR, Cable Loss,
Distance-To-Fault RL, Distance-To-Fault VSWR, 1-Port Phase, and Smith Chart. This
manual provides setup and measurement procedures for each measurement. It also includes a line sweep fundamentals overview section. P/N: 10580-00241
Measurement Guide
pdf 3.0 MB
Version: F
18/10/2022
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235
Catalog
pdf 13.3 MB
Version: AD
26/07/2022
2 page overview of the key specifications, optional accessories, and ordering information for the PIM Master. P/N: 11410-00831
Brochure
pdf 1.2 MB
Version: J
28/06/2022
The PIM Master MW82119B with Site Master option provides an integrated test solution capable of certifying both PIM and
line sweep performance with a single test instrument. The PIM Master MW82119B solution offers the same ease-of-use,
ruggedness, and familiar menus as its predecessor, along with new features to enhance productivity and speed site testing. P/N: 11410-00824
Brochure
pdf 8.6 MB
Version: N
27/06/2022
This application note details the additional PIM testing that is required at new FirstNet sites, specifically focusing on the need for 2-port PIM testing. P/N: 11410-02865
Application Note
pdf 4.2 MB
Version: A
21/09/2021
The 2000-1746-R accessory kit includes the RF components, tools, and cleaning supplies needed to support PIM testing at a typical cellular installation. The low PIM termination and RF adapters included in this kit support PIM testing of one- or two-port devices with any combination of Type N(m), Type N(f), 7/16 DIN(m), or 7/16 DIN(f) RF connectors. The contents are packaged in a padded transit case for maximum protection while transporting to and from the test location. P/N: 11410-00758
Datasheet
pdf 595.9 KB
Version: E
20/07/2021
This manual provides maintenance instructions for Anritsu PIM Master model MW82119B. P/N: 10580-00401
Maintenance Manual
pdf 14.3 MB
Version: F
11/05/2021
This document shows the specifications of the high performance Low PIM Load. P/N: 11410-00613
Datasheet
pdf 949.9 KB
Version: C
20/04/2021
This Measurement Guide describes the operation of the PIM Master MW82119B, battery
operated PIM Analyzer for performing PIM measurements. P/N: 10580-00402
Measurement Guide
pdf 7.3 MB
Version: N
20/04/2021
Low Passive Intermodulation (PIM) Load for use with the Anritsu PIM Master MW82119B. P/N: 11410-01023
Datasheet
pdf 515.1 KB
Version: C
20/04/2021
Quick overview of the 1-port and 2-port PIM Master. P/N: 10580-00472
Quick Reference Card
pdf 1.7 MB
Version: B
20/04/2021
The PIM Master MW82119B User Guide is part of a set of manuals that cover all of the
instrument functions and their use. The PIM Master with Site Master option is capable of
performing a wide variety of Passive Intermodulation (PIM) and Line Sweep measurements. This guide provides a quick-start section with a brief overview of the available PIM and Line Sweep measurements. P/N: 10580-00400
User Guide
pdf 18.2 MB
Version: P
20/04/2021
The 2000-1745-R accessory kit includes the RF components, tools, and cleaning supplies needed to support PIM testing at a typical cellular installation. The low PIM termination and RF adapters included in this kit support PIM testing of one- or two-port devices with any combination of Type N(m), Type N(f), 7/16 DIN(m), or 7/16 DIN(f) RF connectors. A padded backpack is provided for transporting the kit components to and from the test location. P/N: 11410-00757
Datasheet
pdf 753.0 KB
Version: D
20/04/2021
