The Near-Field Probe set (p/n: 2000-2149-R) includes three magnetic (H) field and
two electric (E) field probes designed for use in the resolution of emission problems, over a
broad range of frequencies from below 100 kHz to above 1 GHz. The set also includes a 20 cm
extension handle and comes in a custom carrying case. P/N: 10580-00347
User Guide
pdf 2.7 MB
Version: D
5/12/2025
This Measurement Guide is for the VNA Master B and C series Vector Network Analyzers. The MS2026B and MS2028B VNA Master needs to have Firmware Version 2.0 and higher. Also covers the LMR Master in VNA mode. P/N: 10580-00289
Measurement Guide
pdf 22.8 MB
Version: N
18/09/2024
This SCPI Programming Manual provides information for remote operation of the MS20xxC
Vector Network Analyzer (MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00306
Programming Manual
pdf 3.9 MB
Version: L
13/05/2024
This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the
equipment. P/N: 10100-00065
Datasheet
pdf 1.4 MB
Version: F
24/10/2022
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00030 | OHS | F | 06/15/2020
Online Help System
html 185.8 KB
Version: F
15/06/2020
The VNA Master User Guide is part of a set of manuals that cover all of the instrument
functions and their use. This manual covers the instrument overview, system functions, and
other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00305
User Guide
pdf 11.0 MB
Version: N
28/04/2020
This Measurement Guide describes the test and measurement functions of Anritsu RF and
Microwave Handheld Instruments. Basic spectrum analyzer functions are included with most
Anritsu handheld instruments. P/N: 10580-00349
Measurement Guide
pdf 21.8 MB
Version: P
28/04/2020
This document provides instructions for mounting Anritsu handheld instruments in
to the Anritsu Rack Mount Accessory, part number 66864. P/N:10580-00338
Installation Guide
pdf 3.5 MB
Version: C
7/02/2020
This Measurement Guide documents the Power Meter and the High Accuracy Power Meter for the following Anritsu instruments: BTS Master, Site Master, Spectrum Master, and Cell Master. P/N: 10580-00240
Measurement Guide
pdf 2.7 MB
Version: J
16/01/2020
This quick start guide provides a brief overview of the installation and use of the 70774 Instrument Test Software with the following Anritsu handheld analyzers:
VNA Master Models: MS2024B, MS2025B, MS2034B, MS2035B, MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, MS2038C, and LMR Master S412E.
Quick Start Guide
pdf 815.7 KB
Version: C
8/05/2018
This guide provides general information, configuration and operation instructions for the 2000-1752-R wireless travel router. P/N: 10580-00432
Installation Guide
pdf 1.2 MB
Version: D
24/09/2017
This manual provides service and maintenance information for the Anritsu MS2026C, MS2027C, MS2028C,
MS2036C, MS2037C, and MS2038C models of the handheld VNA Master.
Maintenance Manual
pdf 23.3 MB
Version: F
30/08/2017
The High Performance VNA Master Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00037
Datasheet
pdf 25.2 KB
Version: A
9/06/2017
This quick start guide provides a brief overview of the installation and use of the 2300-533-R System Verification Software and the SC7858 and SC7859 Verification Kits with handheld VNA Masters.p>
Quick Start Guide
pdf 1.1 MB
Version: C
16/07/2013
Utilize Anritsu handheld Site Master, Cell Master, and BTS Master for Cable and Antenna Measurements. P/N: 11410-00473
Troubleshooting Guides
pdf 2.0 MB
Version: B
12/03/2013
