Skip to main content

Download Center

Search by product Model Number

By Document Type

Field Master Pro MS2090A Programming Manual

This manual provides SCPI programming information and a list of SCPI programming commands for the Anritsu MS2090A Field Master Pro Spectrum Analyzer. PN: 10580-00445

Programming Manual pdf 1.7 MB Version: H 29/07/2020

S331P Site Master Programming Manual

This SCPI Programming Manual provides information for remote operation of the Site Master S331P Cable and Antenna Analyzer using SCPI commands sent from a user application on an external controller through an Ethernet connection or on the local S331P controller. P/N: 10580-00474

Programming Manual pdf 1.4 MB Version: A 29/07/2020

MS20xxB VNA Master Programming Manual

This SCPI Programming Manual provides information for remote operation of the MS20xxB Vector Network Analyzer (MS2024B, MS2025B, MS2034B, and MS2035B) using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00302

Programming Manual pdf 3.1 MB Version: J 30/06/2020

Bluetooth Test Set MT8852B Remote Programming Manual

Remote Programming Manual for Bluetooth Test Set.

Programming Manual pdf 1.3 MB Version: 6 22/06/2020

VectorStar MS464xB Programming Manual

This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet. P/N: 10410-00322

Programming Manual pdf 30.1 MB Version: Y 5/06/2020

LMR Master S412E Programming Manual

This SCPI Programming Manual provides information for remote operation of the S412E LMR Master using commands sent from an external controller through the Ethernet or USB connection. P/N: 10580-00319

Programming Manual pdf 4.9 MB Version: AA 27/05/2020

E-Series Handheld Instruments Programming Manual

This SCPI Programming Manual provides information for remote operation of the E series instruments using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00256

Programming Manual pdf 4.9 MB Version: W 27/05/2020

PIM Master MW82119B Programming Manual

This SCPI Programming Manual provides information for remote operation of the PIM Master MW82119B, Passive Intermodulation (PIM) Analyzer, using commands sent from an external controller through the USB or Ethernet connection. P/N: 10580-00403

Programming Manual pdf 2.5 MB Version: J 21/04/2020

RF and Microwave Signal Generator MG369xC GPIB Programming Manual

This manual provides information for remote operation of the Series MG369xC Synthesized High Performance Signal Generator using commands sent from an external controller via the IEEE-488 General Purpose Interface Bus (GPIB). P/N: 10370-10374

Programming Manual pdf 3.5 MB Version: E 3/03/2020

RF and Microwave Signal Generator MG369xC SCPI Programming Manual

This manual provides information for remote operation of the Synthesized Signal Generator Series MG369xC using commands sent from an external controller via the IEEE-488 General Purpose Interface Bus (GPIB). P/N: 10370-10375

Programming Manual pdf 3.0 MB Version: E 3/03/2020

ShockLine MS46xxxA/B and MS4652xB VNA Programming Manual

ShockLine VNAs supports remote operations commanded via the TCP/IP or VXI-11 protocols. This manual provides operation and programming information for this activity. P/N: 10410-00746

Programming Manual pdf 12.3 MB Version: U 21/01/2020

MA244xxA Peak Power Sensors Programming Reference Manual

This programming reference manual describes the data structures, enumerations, and covers the expected parameters for the MA244xxA Peak Power Sensors. P/N: 10585-00034

Programming Manual pdf 1.5 MB Version: A 30/10/2019

MS20xxC VNA Master Programming Manual

This SCPI Programming Manual provides information for remote operation of the MS20xxC Vector Network Analyzer (MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00306

Programming Manual pdf 4.0 MB Version: K 1/05/2019

Spectrum Master MS2720T Programming Manual

Programming instructions for the Anritsu Spectrum Master Model MS2720T RF and Microwave Handheld Spectrum Analyzer. P/N: 10580-00341

Programming Manual pdf 3.8 MB Version: J 1/05/2019

BTS Master MT8220T Programming Manual

This SCPI Programming Manual provides information for remote operation of the MT8220T High Performance Base Station Analyzer using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00367

Programming Manual pdf 3.4 MB Version: H 1/05/2019

Vision Software MX280001A API Programming Manual

This documentation provides a description of the Anritsu’s Remote Spectrum Monitor (RSM) and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. API's are presented both for control of Anritsu's RSM hardware product line (MS2710XA) as well as for Vision software. Most features in Vision are paid options. In order for these options to work, the RSM hardware must have these options enabled. Please see the Vision software Product Brochure and User Guide for option information.

Programming Manual pdf 2.2 MB Version: B 16/01/2018

VectorStar MS464xB Programming Manual Supplement

This programming manual supplement provides information for remote operation of the VectorStar MS4640B Series VNA using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet for Anritsu Lightning 37xxxx and HP 8510 commands.

Programming Manual pdf 3.1 MB Version: E 30/09/2016

Microwave Site Master S820E SCPI Programming Manual

This SCPI Programming Manual provides information for remote operation of the Microwave Site Master S820E, Cable and Antenna Analyzer, using commands sent from an external controller through the USB or Ethernet connection.

Programming Manual pdf 2.9 MB Version: F 20/07/2016

Site Master S331L SCPI Programming Manual

This SCPI Programming Manual provides information for remote operation of the Site Master S331L, Cable and Antenna Analyzer, using commands sent from an external controller through the USB or Ethernet connection. This Programming Manual includes the following: An overview of the USB and Ethernet connections to the instrument. An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions. The IEEE common commands that are supported by the instruments. A complete listing and description of all the SCPI commands that can be used to remotely control functions of the instrument. The commands are organized by measurement mode starting in Chapter 3. This manual is intended to be used in conjunction with the Site Master S331L User Guide. Refer to the instrument user guide for general information about the instrument, including equipment setup and operating instructions.

Programming Manual pdf 2.2 MB Version: E 6/05/2016

VectorStar MS4640A Series VNA Programming Manual

This manual provides information for remote operation of the VectorStar MS4640A Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet.

Programming Manual pdf 25.4 MB Version: L 27/05/2015

By Document Type

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46131A, and MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

Drivers, Software Downloads exe 237.3 MB Version: v2020.7.1 6/08/2020

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

Drivers, Software Downloads pdf 284.5 KB Version: v2020.7.1 6/08/2020

IVI-C Installation Files

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

Drivers, Software Downloads exe 100.2 MB Version: v2020.7.1 6/08/2020

Release Note for IVI-C Driver

Release history for the IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

Drivers, Software Downloads pdf 326.4 KB Version: v2020.7.1 6/08/2020

Field Master Pro Instrument Software

This firmware contains the latest updates and features for your instrument. Download the file to a USB storage device, plug the device into the instrument, and update the software from the system information page.

Drivers, Software Downloads rau 284.2 MB Version: V2020.7.1 29/07/2020

Field Master Pro PC Software

Remote user interface for the MS2090A. Connect to any MS2090A on the network by entering the IP address. Download and install on any PC using Windows 7, 8.1, or 10.

Drivers, Software Downloads exe 39.7 MB Version: 2020.7.1 29/07/2020

Release History for the Field Master Pro Software

Release history for the Field Master Pro software which works with Field Master Pro MS2090A.

Drivers, Software Downloads pdf 140.4 KB Version: 2020.7.1 29/07/2020

MS4640B VectorStar Application (Software and DSP Firmware)

Unzip the downloaded file into a flash drive. Important: New software installation instructions are included. Please be sure to read the "VectorStar How To Install" document before installing.

Drivers, Software Downloads zip 394.0 MB Version: 2020.5.2 22/07/2020

VectorStar Application Installation

This version of software (and any other software version 2.1.0 and later, including those of format V201x.x.x) requires installation of Bittware 8.33 on the VNA prior to installation of the VectorStar application. Installation of Bittware is only needed once and does not need to be reinstalled at every VectorStar application installation. Please refer to Appendix A in this document for details about Bittware versions and installation of this driver.

Drivers, Software Downloads pdf 107.3 KB Version: 2020.5.2 22/07/2020

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

Drivers, Software Downloads 20/07/2020

CombiTest Software Package v3.3 RC7

CombiTest Software Package v3.3 RC7 for Bluetooth Test Set MT8852B

MD5 : 9091cf471b6f3df4d9d659edeaebac93

Drivers, Software Downloads zip 2.5 MB Version: 3.3 RC7 14/07/2020

CombiTest MT8852B Plug-in Software Package v1.5 RC5

Plug-in Software Package v1.5 RC5 for Bluetooth Test Set MT8852B.
This version requires MT8852B firmware v5.00.012 or later.

MD5 : 4afe5807db9e1c3c0e1934a3f74acb75

Drivers, Software Downloads zip 2.5 MB Version: 1.5 RC5 14/07/2020

Software for MT1000A with MU100011A

Software of MT1000A.
Use it when using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

・ MU100011A 100G Multirate Module
・ MU100010A 10G Multirate Module
・ MU100020A OTDR Module
・ MU100021A OTDR Module
・ MU100022A OTDR Module
・ MU100023A OTDR Module
・ MU100040A/B CPRI RF Module
・ MU100090A High-Accuracy GPS Disciplined Oscillator

The file size is large, so download after checking your bandwidth.

MD5 : dd91813610ee65bff52c061f9e2ac2d1

Drivers, Software Downloads zip 805.8 MB Version: 10.03 13/07/2020

MT1000A_Software

Software of MT1000A.
Use it when NOT using the 100G Multirate Module MU100011A.
It supports operation with the following modules.

・ MU100010A 10G Multirate Module
・ MU100020A OTDR Module
・ MU100021A OTDR Module
・ MU100022A OTDR Module
・ MU100023A OTDR Module
・ MU100040A/B CPRI RF Module
・ MU100090A High-Accuracy GPS Disciplined Oscillator

The file size is large, so download after checking your bandwidth.

MD5 : 1b9f13b73928fc94e563808a856fc75a

Drivers, Software Downloads zip 474.1 MB Version: 10.03 13/07/2020

MX100001A windows control software

MX100001A windows control software.

MD5 : 444337f699930309a63f6276335daf9b

Drivers, Software Downloads zip 73.9 MB Version: 10.03 13/07/2020

MT1100A_Software

Software of MT1100A.

MD5 : 2cc3e9739549fc7c58a38b334dc534cd

Drivers, Software Downloads zip 688.2 MB Version: 10.03 13/07/2020

MX100001A windows control software

MX100001A windows control software.


MD5 : 4d6057928d4144e53b55c5384568c6ce

Drivers, Software Downloads zip 73.9 MB Version: 10.03 13/07/2020

Network Master Pro/Flex Release Notes

Release information for the latest version of MT1000A/MT1100A

Drivers, Software Downloads pdf 404.6 KB Version: 10.03 13/07/2020

Release Note V10.03 (Illustration)

This is the illustrated version of MT1000A/MT1100A release note. Some contents of release note are explained with figure.

Drivers, Software Downloads pdf 20.9 MB Version: 10.03 13/07/2020

MS9740B Software

Firmware and documents for MS9740B are contained in the zip file.

MD5 : 107dc1e208764a4f7079b28bfc9bb7b4

Drivers, Software Downloads zip 13.6 MB Version: v1.00.03 9/07/2020

By Product Category

Confirm your country below to see local events, contact information and special offers.