Designed for Field Operations
The Network Master Gigabit Ethernet tester is purpose built for testing Ethernet links in the field. Its hardware and user interface are
optimized for simplicity, making it easy to use for any skill level, and it is rugged enough to function in harsh environments.
The Network Master Gigabit Ethernet tester is ready for measurement
in about 15 seconds so productive work can start immediately.
Long Battery Life
Since AC power is not always available where you need it, the Network
Master Gigabit Ethernet tester provides up to 3 hours of testing on a
single charge, depending on configuration and setup. This coupled with
an optional car cigarette lighter cord guarantees the instrument is ready
when you are.
With its lightweight design and user friendly dimensions, the Network
Master Gigabit Ethernet tester is perfect for the outside plant
environment and can easily be managed with one hand. The standard
softcase with shoulder strap further increases portability when traveling
from the truck to the testing site.
With no fans or vents to allow dust and moisture to enter the unit, the
Network Master Gigabit Ethernet tester was designed for the
challenging outside plant environment.
4.3-inch Wide Screen Display for Easy Viewing
The high resolution, full color, 4.3-inch wide screen display is the
perfect format for viewing Ethernet measurement results. It also
provides excellent readability both indoors and outdoors.
||No Experience Required
The expertise is built into the Network Master Gigabit Ethernet tester.
With its Test Automator and PASS/FAIL indicators the instrument
makes it easy to test and troubleshoot Ethernet connections.
① 4.3-inch high resolution, Indoor/Outdoor color display
② Dedicated function keys for performing tasks
③ Start key for fast testing
④ Arrow keys for cursor movement and menu navigation
⑤ Set to Select/Accept
⑥ Menu key for easy access to set-ups and mass storage
⑦ Ethernet test port A
⑧ Ethernet test port B
⑨ USB port for connecting to PC Type B (mini USB)
⑩ USB port for connecting to thumb drive and USB-Ethernet
converter Type A
Designed for Network Activation
For installation, commissioning and QoS verification the Network Master Gigabit Ethernet tester provides powerful and flexible
traffic generation capabilities, allowing you to easily test the network under various conditions, including generation of VLAN tagged
traffic. The instrument also provides facilities for BER testing of the lines, performance statistics and QoS statistics.
|Installation and Maintenance Simplified
Since the Network Master Gigabit Ethernet tester is purposely built for
easy testing of Ethernet links in the field, its hardware and user
interface are optimized for simplicity. The instrument is easy to setup
using its keys and screen. The user can also store setups relevant for a
given application and via a USB port distribute the setup to other
instruments with the Gigabit Ethernet module. A Test Automator is
provided making it easy to set up a sequence of tests.
The Test Automator makes it easy to set up a sequence of tests
With the powerful and flexible report generator you can create .pdf or
.csv files for selected measurement results. With these files you can
provide professional documentation of test results to your customers.
PASS/FAIL indication, Graphical Display
The result can be checked not only value but also PASS/FAIL indicator
and Graphical Display
||Y.1564 Test Option
ITU-T Y.1564 is a new test methodology for bring Ethernet networks
into service, simultaneously completing multiple traffic streams. RFC
2544 commonly use today completes tests in a serial manner never
running all traffic streams at the same time. ITU-T Y.1564 completes
this testing in two phases:
- Service Configuration Test, confirms the end to end configuration while
quickly checking the Information Rate (IR), Frame Delay Variation
(FDV), Frame Loss Ratio (FLR), Frame Loss Ration at the Service
Acceptance Criteria (FLRSAC), Committed Burst Size (CBS) and
Excess Burst Size (EBS) sequentially for all configured traffic streams.
- Service Performance Test transmits all configured traffic streams
simultaneously at the CIR confirming all traffic is able to transverse
the network under full load while checking the following IR, FDV, FLR
and Availability (AVAIL).
This two phase approach reduces total testing time.
RFC 2544 Test Option
With the RFC 2544 test option, testing of throughput and frame loss,
latency, packet jitter and burstability is straightforward. The Network
Master Gigabit Ethernet tester automates the testing procedure while
still allowing you to configure the test to be as thorough as needed.
To get full information on the performance of both sides of a line, the
end-to-end test mode allows two Network Master Gigabit Ethernet
testers to work together in a master-slave setup whereby the user can
control both units and inspect the results of the test from both units on
the master instrument.
The Ethernet Multistream option for the Network Master Gigabit
Ethernet tester allows testing a congested networks ability to transport
high priority traffic rather than lower priority traffic. The user can
activate up to 8 streams with different priority settings on the Ethernet
line and detect how they are affected by frame loss through the network.
Simplifying Maintenance and Troubleshooting
The Network Master Gigabit Ethernet tester has maintenance and troubleshooting application in 800 g pocketable package.
|Channel Stats (Option)
Up to 63 streams can be selected by the filter of Source/Destination
addresses, VLAN, MPLS. Those streams can be monitored and
displayed in detailed information. It's useful to identify the error
streams, top talkers and network attack.
||Simultaneous Two Ports Monitoring
Network Master Gigabit Ethernet tester has two ports and they can be
used simultaneously. It saves the test time for multiple ports
deployment. It is possible to support identification of issues in the
network by pass through monitoring and bidirectional monitoring.
Remote GUI Option
Network Master Gigabit Ethernet tester can be operated remotely from
the far end operation center using a Web browser. USB-Ethernet
Converter (option) connects the Network Master Gigabit Ethernet tester
with Ethernet for remote control.