Skip to main content

Optical Loss Test Set

This product has been discontinued Replacement Model(s) : CMA5 , CMA50

The MS9020D is a handy optical measuring instrument that incorporates an LD or an LED light source and an optical power meter. It can also be used for return loss measurement. Every unit of the LD light source (4 types), LED source (7 types), the sensors (8 types) and the return loss measurement unit (1 type) is a plug in type, for easy exchange and highest suitability for field use.

The MS9020D covers 0.66 ?m, 0.85 ?m, 1.3 ?m, and 1.55 ?m bands for optical loss measurement. In addition to the CW mode, it provides a modulated light mode with 270 Hz, 1 kHz, and 2 kHz modulation signals. Therefore, it is possible to measure optical loss over a wide dynamic range without stray light effect. This is the most suitable for single mode fiber measurement. For return loss, 1.3 ?m band single mode fibers can be measured in the 0 to 40 dB range. As a power meter, every sensor has a wavelength calibration function of 5 nm steps at 3 wavelengths, so absolute values can be read directly.

  • Measures optical loss up to 67 dB
  • Measures CW and modulated light
  • Provides calibration function of 5 NM steps at 3 wavelengths
  • Also measures optical return loss (0 to 40 dB)
  • Operates in 3 modes; AC, rechargeable battery, and dry cells
  • Various Connectors

  • Optical fiber loss measurement
    When measuring optical fibers, it is convenient to provide one MS9020D each at both the near and far ends. By using switchable light source units (MS0904A/B, MS0909A), one touch measurement of 0.85/1.3 ?m and 1.3/1.55 ?m can be done. More accurate loss measurement is possible by using the modulated light function. When an LD light source is used, it is possible to measure optical loss up to 67 dB.

  • Optical parts performance check
    A light source and optical power meter are provided, and an optical parts performance check is possible at low cost.

  • Optical return loss measurement
    Return loss of connectors or optical devices can be measured easily using return loss measuring units.

  • Applications
    MS9020D (mainframe)
    Unit display W, W (REL), dBm, dB (REL) selectable, 4 digits
    Measurement resolution W/W (REL) display: 0.1 to 1%, dBm/dB (REL) display: 0.01/0.1 dB, Blanking is possible.
    Auto power off Power turns off automatically after 5 minutes of no adjustment
    Averaging On and off selectable
    Wavelength sensitivity
    characteristics compensation
    Deviation of optical power sensor is compensated automatically in 5 nm steps.
    Modulation CW, 270 Hz, 1 kHz, 2 kHz (2 kHz is for MA9621A only)
    Power AC adapter, Ni-Cd battery, UM-3 Alkali/Manganese battery

    Light sources (MS0901A, MS0902A, MS0904B, MS0905A, MS0906A, MS0902D, MS0903D, MS0908A, MS0909A)
    * MS0903A and MS0904A are discontinued. MS0903A is replaced by MS0903D and MS0904A by MS0909A.
    Applicable fiber GI,SM(ITU-T G.652),Plastics
    Element LED,LD,EE-LED,FP-LD
    Wavelength (um) 0.635, 0.66, 0.85, 1.3, 1.31, 1.55, 0.85/1.30, 1.3/1.55, 1.31/1.55
    Optical output level:
    CW mode (dBm)
    -47 to -10 (LED), -3 (LD),-42 to -36(EE-LED),-3(FP-LD)

    Optical sensors (MA9421A, MA9422A, MA9423A, MA9621A, MA9622A, MA9721A, MA9722A, MA9723A)
    Wavelength range 0.38 to 1.8 um
    Input Direct, connector adapter
    Measurement range -70 to +20 dBm (CW)