Skip to main content

Wireless Connectivity Test Set (WLAN Tester)

What's NEW
  • WLAN 802.11ax Option
  • Best WLAN Test Solution for CTIA/WFA CWG Test Plan Ver. 2.1  View Leaflet

downloadView Product BrochuredownloadView Product IntroductionplayVideo

What is MT8862A?

The Wireless Connectivity Test Set MT8862A (WLAN Tester) is for measuring the RF TRx characteristics of WLAN IEEE802.11a/b/g/n/ac/ax (2.4 GHz and 5 GHz bands) devices. The MT8862A has standard WLAN protocol messages (WLAN Signalling) to connect with the device under test (DUT) for measuring each TRx performance item as Network Mode, and features built-in Direct Mode to support flexible test environment.

  • RF Performance Measurement under Realistic Operation Conditions (Network Mode)

  • By using the MT8862A Network Mode, RF TRx characteristics, such as Tx power, modulation accuracy (EVM), etc., can be measured with the WLAN devices in realistic operation conditions. No necessary to put the DUT into a dedicated test mode with directly controlling the DUT, the DUT RF performance can be quantified under the firmware conditions at actual shipment.

  • Easy Measurement Environment Configuration

  • The MT8862A can simulate access points (AP) and stations (STA) to establish the DUT network connection using IEEE802.11a/b/g/n/ac/ax WLAN protocol messaging. When the connection is established, RF measurements can be made using general WLAN communications procedures without requiring special tools and control procedures, eliminating the need for configuring a special measurement environment.

  • 2x2 MIMO Rx sensitivity and Tx power measurement functions

  • Measures Rx sensitivity and Tx power at 2x2 MIMO communications using two MT8862A units; ideal for evaluating RF characteristics of finished products at 2x2 MIMO communications

  • Device Measurement with encrypted signal

  • The WEP, WPA-Personal, and WPA2-Personal WLAN encoding technologies are supported to enable connection and measurement without disabling DUT security settings.

  • Unique Data Rate Control Algorithm for Tx Measurements

  • The MT8862A has a unique built-in algorithm for controlling the data rate to perform Tx measurements in the Network Mode at the user-specified data rate.

  • Rx Sensitivity Measurements using ACK Frame Count for Bathtub Curve Generation

  • The MT8862A supports Rx sensitivity measurements using the ACK frame count; counting the ACK frames sent by the DUT versus the test packets sent from the MT8862A supports calculation of the packet error rate (PER). Packets can be sent while lowering the power level by setting the power level range (-120 to 0 dBm) and step size, and the Rx sensitivity Bathtub curve can be generated automatically. Packets including MAC address and payload length can be configured in real-time for measurement at various data rates.

  • Web Browser GUI Operation Immediately after Connection

  • Connect the MT8862A to the external PC using an Ethernet cable for instant access from the Web browser to complete setup of the GUI operation environment without requiring test setup operation.
    The Web-browser based GUI eliminates usage worries about version matching with the main frame firmware. Additionally, the MT8862A remote control port supports the DHCP client function and both host and domain name settings offer easy control simply by connecting the PC controller and MT8862A to the same network.

  • Frame Capture Logging for Troubleshooting Connection Problems

  • With built-in frame capture logging function, the MT8862A can capture and save frame logs for troubleshooting DUT connection problems. Captured logs are in the *.pcap format for viewing by supported applications, making it easier to analyze DUT connection problems.

  • IP Data Transfer using Connection Verification Test

  • The Ethernet port on the back panel of the MT8862A can be used for exchanging IP data with an external server; IP connections between the client PC connected to the DUT and the external server connected to the MT8862A can be checked using the ping function, etc.


Related Solutions: Easy Evaluation of WLAN Device Wireless Section

downloadView Product BrochuredownloadView Product IntroductionplayVideo

RF TRx Measurement Functions for WLAN Equipment

  • Network Mode: Connection establishment with WLAN devices using WLAN protocol messaging (WLAN Signalling) makes measurement available.
  • IEEE802.11a/b/g/n/ac/ax support
  • 2x2 MIMO Rx sensitivity and Tx power measurement functions
  • Supports secure WEP, WPA-Personal, and WPA2-Personal encrypted connections.
  • Tx measurements (Tx power, modulation accuracy, etc.) using ICMP echo request.
  • PER (packet error rate) measurement using ACK count for Bathtub curve generation as Rx measurements
  • Remote control and display of measurement results from Web browser using built-in Web server
  • Connection troubleshooting by capturing and analyzing WLAN protocol message
  • Sending/receiving IP data to/from external server using built-in IP interface


Related Solutions: Easy Evaluation of WLAN Device Wireless Section

Anritsu IoT measuring instruments

Anritsu IoT measuring instruments
Anritsu IoT measuring instruments: IoT,Testing,Test Solution, IoT Products,RF/Wireless Components Conformance Test, 5G IoT and High Speed Devices.

IoT Testing Anritsu

IoT Testing Anritsu
Connecting the IoT World Testing with Anritsu


MT8862A Network Mode
The MT8862A makes it easy to check WLAN product quality under actual operating conditions.

Introducing the New Wireless Connectivity Test Set/Wireless LAN Tester MT8862A

Wireless Connectivity Test Set
RF TRx Tests of WLAN Devices
802.11ac signaling mode
PC over Ethernet connection

Confirm your country below to see local events, contact information and special offers.