Skip to main content
Precision SmartCal MN25208A

Precision SmartCal™


The SmartCal MN25208A is a series of 2-port auto calibration units covering a frequency range from 300 kHz to 8.5 GHz. The MN25208A has 3 different connector options which include a set of N(f), K(f), or 3.5 mm(f) type connectors. The MN25208A delivers automatic, fast and error-free calibrations for any ShockLine VNA. The SmartCal automatically powers on via an USB connection and loads calibration kit coefficients from on-board memory into the ShockLine software. The SmartCal is ready to use immediately after detection by the VNA because it doesn't require warm-up.

SmartCal improves productivity by providing easier and faster single connection calibrations. Port auto sense and port mapping reduce errors and make multiport calibrations easier. The MN25208A, along with easyTest, can also be used in guided graphical test procedures to further simplify complex calibrations.

Key Configurations

Series Description
MN25208A 2-port SmartCal, 300 kHz — 8.5 GHz

Connector Options (Select one connector option only.)

Option Description
MN25208A-001 N(f) – N(f) Connectors
MN25208A-002 K(f) – K(f) Connectors
MN25208A-003 3.5 mm(f) – 3.5 mm(f) Connectors
  • 自動加載校準套件係數 - 加速設定並減少校準錯誤
  • 自動感應 – 避免不正確連接或不良連接而導致不良校準
  • VNA 到 SmartCal Port 映射 – 增加靈活性並簡化多埠校準
  • ShockLine 軟體自動檢測 SmartCal – 簡單且易用的校準軟體
  • 無內部加熱器 – 無需等待校準
  • USB 供電和控制 – 隨插即用介面
  • 單一連接校準 – 減少接頭和線纜的磨損和撕裂
  • 支持所有 ShockLine VNAs – 可用於支持 1、2、4-埠校準
  • SCPI 命令集 – 易於集成到自動測試環境中
  • 低成本 – 低成本的自動和快速校準
  • 小尺寸 – 小尺寸更易於在 VNA 之間調配使用